RGH3 Trinity Xbox 360 How To Guide. RGH (not JTAG) with 2 wires and NO GLITCH CHIP!
Vložit
- čas přidán 10. 02. 2022
- My written guide: weekendmodder.com/RGH3-Trinit...
Video from 15432 himself: • Xbox 360 RGH3 Demo
Great explanatory video from Josh Davidson: • Video
Guide for opening console: www.sosav.com/guides/game-con...
Video of the R3R19 point scraping that was helpful to review preparing the small via: • INSTABOOT RGH 360 SLIM... - Věda a technologie
Thanks a lot for this! However, your file repack download link isn't working.
I removed it as it's no longer a good idea - the official builds of Jrunner support RGH3 just fine.
@@TheWeekendModder I read that in the tutorial thanks for updating really appreciate the translations. I completed mine thanks to you gotta get home after work and put it back together haha
@@TheWeekendModder the program is different now and dont work the same as when you made this video . no matter what i do i cant get it to work :(
@@TheWeekendModderwhy isn’t a good idea anymore?
If you are getting “Header is Wrong” using the PicoFlasher and maybe other flashers… it’s because your wires from the flasher to the Xbox are to LONG. I made this mistake, my wires were around 20inches long and I was get this error. They are now around 6-9 inches long and it works perfectly fine now. Please pass this along, that the NAND wires need to be short…. Maybe at most 10 inches long.
P.S. Thank you for sharing this video with us all.
DUDE i cannot begin to thank you enough times for making this video. You gave me enough confidence to give it a shot and it worked and i got xexmenu on it and everything and am in the process and getting my games downloaded
Always loved your videos. Been wanting to try RGH 3 since it was released. Just bought another Trinity on ebay so excited to give it a go. And the pico looks fantastic for flashing
Got my RGH3 QSB from you store yesterday and successfully got my MW3 Corona up and running. Thanks for the content!
Thanks for sharing the great work 15432 and all those guys are doing. I have modded two trinity consoles, and updated two corona consoles using the RGH 3.0 method and they all insta-boot every time, without fail. I do feel a bit bad, because I always buy my mod chips and supplies from you, but now…sorry man. I really do appreciate all the great tutorials though and I will still try and support when I can.
Glad to see a new video have not been able to mod in a while due to not having enough free time but I'm planning on doing an rgh 3 and eventually add a viper v3, great video and a through tutorial keep up the great work!
Welcome back brother! This is good to see
Thank you so much weekend modder, I successfully modded 2 slims and 2 phats last year because of your tutorials. Also looking forward to buying more tools from your eBay
I don't have an eBay...
My store is weekendmodder.com/store
Fantastic - ive always followed your guides and having trouble with my trinity and rgh3 so gonna watch
Have fun!
I'm actually surprised the modding scene for 360 is still active and going after this long. This reminds me of the classic JTAG days back in 2007-2009. Huge respect to 15432 for making this discovery.
HE RETURNS!! Thanks for the toutorial now i dont need to go on 3 forums and 2 youtube videos to find the right points to solder too and how to make the rgh 2 nand dump to 3
I'm thinking I might do a separate "How to upgrade from RGH2 to RGH3" video. Since you've got a lot of the work out of the way it would be shorter!
@@TheWeekendModder yes please!
I did it using the FT2V1 point on Trinity + 3.3K ohm resistor and it works fine. Saved me the hassle of soldering on the other side of the board. All super cheap using an 8 euro iron, cut jumper wires and the pico flasher :) Went ecstatic when solder finally stuck to the CPU_PLL_BYPASS POINT. Thank you!
Nice to see you buddy 🙏
OH YEAH!!! LONG TIME NO SEE!!
Great video as always, love to see a video for RGH3 on Jasper and recommendation on where to purchase parts.
Amazing! Btw what PCB maker did you use for the QSB? JLCPCB cited issues with the width when I tried to use them.
Aww man, I just successfully RGHed my trinity with ace V3 using your tutorials literally a week ago. I get 1-2 second boots most of the time, it was a very fun project, and I’m supper happy with it but no glitch chip RGH3 looks awesome and I probably would have done that, I already have a 3k resistor and wires. Haha I also have a 4GB rona still stock but I have another ace v3, post fix adapter, and sd tool so now idk if I should use ace v3 or RGH3???? Thanks for all your help bro, I really appreciate your videos and resources on your website!
Awesome info, thanks for making the video. I will be doing this to a trinity i picked up off of facebook market place. But I had one question for you, by putting the resistor inline in the wire, do you mean a through hole resistor?
Oh, nice to see you in 2022
Good stuff man
Love the tutorials! I only use Weekend Modder. I’ve also made some purchases from your store. Better prices than eBay on the items I’ve purchased. Any chance of a RGH3 Jasper tutorial?
I've got the written one on the site, but the video is the next on my list! Hopefully this upcoming weekend.
Hi Arron, do you know what the SMD 1k and 3k resistor's wattage is you use in this tutorial?
Thanks for the tutorial, I just want to share that I had a 'qsb post slim v2' instead of trying to remove it I soldered to the pad labelled '1'
Thanx Master ♥️
blue Tack is best to hold wires/boards in place while soldering, no shaking of the hands :)
Do i solder the wires while it’s standby on for jrunner? Or do I solder the wires while the power is off?
WOW This is straight up madness, loving this hack, insta boot everytime, i just updated using the usb method and switch wiring. for the trinity, just so you know since i killed the pad db23g when doing the muffin there is a pad on the other side of the board that works perfect so you don't need to route the wire through just everything on the underside, i used 3 x 1k ohm resistors inline with my own homemade qsb's and it works a treat THANKYOU
I will have to give this a shot because I also ripped the db2g3 pad off! knew of the point on the other side of the board but was getting blinking green light and no boot to xell with just a muffin install or ace install
@@leneal2315 if you have a good nand read you should still be good, when i screwed up i used another board to find other continuity points, post a pic of where you have connected, i bet i can help with that
@@philmcguire7346 yeah my nand wont read lol, not my soldering it's the chip, it died lol
Fyi, PLL is not R3R19 (in your description), PLL has no identifier because the VIA is not a testpoint.
I searched the whole area but the trace from the CPU ball only goes there.
Great stuff.. Gonna have a play with a bricked RROD 360 I found on the street that seems to have lost it's nand.
Peace - Janrocks
With no NAND at all how would you get the CPU key and other stuff you need for the donor?
Finally you back!
When are you doing a corona 4gb?
Corona mobo's are the next I'm going to tackle. What do you suggest - a combined guide or separate guides for 4gb and 16mb Coronas?
@@TheWeekendModder combined will be highly appreciated
so if you have a trinity already glitch chip to a rgh2 how go about updating it to a rgh3 is the princible the same as a corona as the trinity because i noticed you had different wire placing for trinity compaired to the corona am i wrong
I apologize cause im missing one thing.......When connecting the nand cables to the motherboard.... when im finished with everything here do I just stuff the wires in a safe spot to fit when closing up the console? This is my first attempt so just making sure I got it all.
Hi i have a moded xbox 360 corona with coolruner glich cip but the boot time is horrible long. Do i still need to write the nand or i just need to do the wiring?
Nice. Will you be doing a phat tutorial for the others that need it?
Yup. Corona next, then Falcon/Jasper(phat) will be after that.
@@TheWeekendModder Ill be waiting for Jasper lol thank you. (:
I turn the machine on and see the xell screen for a few moments before the screen goes black and the red light flashes. Any ideas?
Any way possible to do a tutorial for RGH 3 for a jasper using a matrix chip, love your tutorials by the way help me a lot thanks
Hi I have done a trinity motherboard using the two wire method, and also flashed the dvd drive,and everything works perfectly. However I now have a Corona 16mb, which I have tried several times now, but jrunner reports no console found. I know I have 5.5v standby power coming off the power brick, however I dont know what power is needed to actually read the nand. I know I have voltages of 3.3V at the j2c1 header as well as 3 volts, but I'm not sure what voltage I actually need to read the nand. I have looked for header voltages on the internet, but cant find anything other than wiring diagrams. I would have liked to find which pin is vcc. I know the yellow wire is ground. I dont know which wires are for data etc. I was hoping that with your knowledge of doing numerous console's you may have come across this information for J2C1 and J2C3. Any help would be much appreciated, regards Andy.
Thank you
Pll point is present on the underside of the board also. There is no need to bring it upside. All the wires will be on the bottom.
Hey - share a link/diagram and I'll do an update to point that out - but keep in mind my videos are targeted at novices! If you know the other point, Great! Use it! The one I showed is EASY no matter what your soldering skill level.
@@TheWeekendModder Best wire by the way is a МГТФ, clear stranded cuprum wire with phtoroplast heat resistance shield. Its flexible, military standart, can find on Russian store or on AliExpress.
@@TheWeekendModder Send you a tweet, bc youtube block links
Got my trinity working with this, had a issue with Jrunner saying my CPU key was incorrect but reopening it fixed it.
hello, I would like to ask for your help because I have an xbox 360 and the problem is that I did all the manipulations for the RGH 3 and after creating ECC and writing ECC it does not restart on xell and it does not restart more. note that when I read the nand on jr programmer there is several information that is not present. I would like to know how to fix this. it's a trinity 16mb
So, can I remove my glitch chip and wire to those points after I flash the custom ECC?
🔥
Jasper guide coming soon?
I'm short on wire in a pinch can I use old ide ribbon cable wire?
Use a fiberglass pen. With this you can expose pll flawlessly. The copper is then perfectly exposed.
Can I read (dump) the nand after I soldered cables in place?
Just upgraded my falcon to RGH3 and now its asking for passcode to play some games, the reset passcode on jrunner is AUUY and does not work as letter A is an invalid key on the key pad. Please help
Is it just me or is using the additional PCB only complicating things? Seems once the solder points are identified the PCB just gets in the way just IMO.
What about resistor sizes? Would a 3.3kohm resistor be appropriate or use of a higher value?
i did not have a 3k resistor at hand, so i used a 4.7k and it worked. I think the documentation states that you can use any value between 1k to 10k
Any help/advice Much appreciated
1: I've done several phats over the years but this is my first slim
2: 16MB Trinity on 17559 dash
3: JR programmer
Ok , all went well with the soldering (I think) , read the nand , created a Glitch2 RGH3 @27mhz ECC etc ..
Flashed the ECC and all went ok BUT although Xell will startup ok after just a few seconds when it says "Requesting dhcp" the screen corrupts and goes no further with a single green led blinking !!
*Any help would be much appreciated*
did you found any solution? i have the same here...
Question.. I want to rgh 3 my trinity with cr and demon. Is it possible?
All four points you need to solder two are on the bottom of the motherboard why go through the motherboard just confused..I’ve done 25 Trinitys and I never had to go through the motherboard all four points are on the bottom of the motherboard.. Weird let me know your response please weekend modder
Hey - share a link/diagram and I'll do an update to point that out - but keep in mind my videos are targeted at novices! If you know the other point, Great! Use it! The one I showed is EASY no matter what your soldering skill level.
Hi pls help!
I have a zephyr one and when I want to create Xebuild it always says Wrong CPU Key
:Getting info from 192.168.......
LockDownValue is 32
Wrong CPU Key
Hey can we remove the nand flasher when done ? Or do you guys leave it attached (wires that is)
Remove the flasher but you can leave the wires in place. Make sure tho that the ends of the wires are insulated and are not touching each other
is there a alternate post point for xbox 360 trinity thansks ..
Do you absolutely need qsb?
can i still use jr proggramer and 4.7k ohm resistor?
Whats best solder to use.
So you can do this on the xbox 360 R2-D2?
Thank you great video
Glad you enjoyed it
The dark green is not grounding , its solder mask thats over blank (empty) PCB . A far easier way to clean the CPU_PLL bypass , is to use a small drill bit between your fingers , 2 seconds , done .
Cool! What size drill bit?
I have some 3.3k ohm resistors will those work
Will this work for xenon's?
Hey Man can you tell me why I got wrong cpu key when I press Create XeBuild ? i got my cpu key from XELL Reloaded via Ip address of my slim . by the way all your video amazing
You probably left the ECC/bin file in your "source" when you should have your nanddump.bin
Does anyone know where to buy jr programmer nand and glitch chip programming wires? I’ve only been able to find them in the kits.
I sell extra nand wires on weekendmodder.com/store. I'm afraid I don't know of a source for JRP to glitch chip programming wires though.
i need a CR4 to RGH3 guide :( help me!! \
i can't believe how long my CR4 console takes to boot though for real. it needs to be swapped to rgh3
I have a corona 4gb it requires a post fix adapter dose it still need it for rgh3?
Yes.
What to do for Corona mother board
SO what i'm hearing is if we buy a PICO we do not need to go buy a JSPv2. Is that correct?
That's extremely oversimplified.
If you're modding a console with a 16mb Nand, and if you're not going to need to program glitch chips, then yes - you can probably get away with just a pico
@@TheWeekendModder I have zero idea what a glitcher does, will i need that to rip my backups onto my hdd or is that something else entirtely
Can i know the process for LPT??
Does this work on corona?
does it matter where i plug the wires into on the pico?
Yes. It matters a lot.
R3R19 or R3R22 ?
SMC_Post1 point is definitely R3R22 and not R3R19.
Xenon owners are stil SOL i guess ? (unless you are on an old DB version) i hope that one day someone discovers a way to mod the Xenon as easy as this, in the meanwhile ill be on a lookout for a jasper console :)
Working Xenons in 2022 are... Uncommon. The rarity of working units, and the lack of HDMI means no one dedicated any effort to modding them. Sorry.
Does anyone no why I can’t connect to Xbox live av connect to internet and network but it won’t connect to Xbox live
Does anybody know if this works on the 360 slim mw3 edition?
Please make a RGH 3.0 video for Jasper/Falcon too.
Yup, it's coming. Corona next (both 16mb and 4gb) and then Phats after that.
I'm good at soldering all the solder points were perfect. I was still not able to get the programming software to recognize my trinity motherboard. I used pico flasher and got error code: "console not found" 😢😢😢
I know this is old but if you have a spare Pico lying around, try it. I had this same problem exactly as you did. Swapped out a new Pico and BOOM read it right away.
@@DurzoBlunts thank you for the suggestion. I will try it.
could i send my Xbox to you to rgh it ?
Xell loading not dashboard I'm lost
3k ohm resitor voltage ?
I couldn't find 3K locally. Used 3.3K. Worked fine for me.
and the xclam remover keeps scratching my motherboard any fix
Stop using it wrong.
LOL, sorry, couldn't help myself. You're probably inserting the "fork" too far into the Xclamp. The little lip on the underside is very shallow - so don't fully insert the forks. Just put them in far enough to get the leverage.
@@TheWeekendModder thank you lol did what you said came right off
Where do I get the trinity.bin file?
Get a current version of Jrunner and the "create ECC" will generate an ECC for you (be sure to have RGH3 box selected). Or grab the RGH3 release pack from 15432's release pack off his youtube.
@@TheWeekendModder hiya, yea I got the. Bin from his pack and it all works now thanks
Where is the ecc file
T8 and T10 Torx drivers
i KEEP GETTING WRONG CPU KEY HELPPPPPP PLZZZZ
Explain to us in easy steps and put the Nand program for us
U didn't use the resistor
Wrong. The resistor is on the QSB, I go over installing it in detail. You skipped over that part probably.
Not to be rude but there’s an easier way then you show in your tutorial
0xFFFFFFFF
Console Not Found
sadly i have an corona :/
It is the same on the corona, only the pll points are different and the resistor is 1k. Also use postfix adapter if needed. All solder point apears on internet.
Hi Sadly, don't worry Corona videos are coming!
just saying i did a trinity with a rgh 2 and my boot timing to loading screen in 11secs so myns insta de fk you mean and they say rgh 2 is the worst one
RGH2 has been great on slims for years, I'm not denigrating the method - I just think RGH3 is objectively "better" because you don't need a separate glitch chip. So if your RGH2 works well for you, I'm not saying you should upgrade, but if you were going to mod a new console - you'd be silly not to use RGH3.
@@TheWeekendModder and I should of put better wording I’m not saying you other people have told me I’m about to try and do a rgh 3 on another slim I got a trinity I’ll go try it I just finished another rgh 1.2 for the jasper