Building the Ultimate Xbox 360 | RGH 1.2 Hack, Restoration ASMR
Vložit
- čas přidán 25. 11. 2021
- Inspired by Austin Evans, I decided to build the TRUE ultimate Xbox 360. I used a Halo 3 special edition console shell and a Jasper motherboard with the RGH 1.2 hack applied to it. I added an additional hard drive containing a bunch of games and did a full restoration of the console. I'm using Aurora dashboard to play my homebrew software and games.
Guide I followed:
www.se7ensins.com/forums/thre...
Link to Octal's J-Runner with extras (be sure to use SMC+):
cdn.octalsconsoleshop.com/J-R...
Amazon affiliate link to the chip I used:
amzn.to/30JWS4x
Amazon affiliate link to the JR Programmer I used:
amzn.to/2YvTQjD
Amazon affiliate link to the X-clamp tool:
amzn.to/3mweVlS
I receive a small monetary kickback for any items purchased via affiliate links.
#xbox
#xbox360
#restoration
#righttorepair - Hry
Odd tinkering wanna be
Thank goodness your channel can serve as the beacon of perfection for me to strive toward
This man's stuff is quality GTFOH
@@RandomizationShow no it isn't
@@NickMicallef and you seem like a Hugh Jeffreys wanna be? What's your point? R&R's content is pretty dope, there plenty of room for everyone on the internet
@@JustinJ. how am I Hugh Jeffrey's wanna be? I don't even like Hugh Jeffrey's
Dude this will have to blow up one day. I love watching these videos. I really enjoy seeing people Clean up, fix, and rgh Xbox’s and you do all of that AND make it ASMR! 😂
Thanks :)
super good quality vid, keep it up boiz
I wish you would make more videos. I really enjoyed them. They were definitely relaxing.
Bro i like these type od videos Keep up the good work 💪💪
Thank you! I really appreciate it
Very nice video! You should put orange LED's in the ring of light board. Very sharp!
I turned this on and then went to go tidy stuff, which was kinda silly because these videos are kinda quiet. However, my cat very much seemed to enjoy watching it, and when I was done tidying, I enjoyed watching this video too :)
lol thank you so much!
Cool video man. My first Xbox 360 got the RROD because my little brother moved it and the video cable came slightly unplugged, but at the time we didn't know that was what caused it. My older brother and I were so mad we banned him from playing when we got a new Xbox.
Hey Restoration, is the OG Halo 3 console reliable? I mean without swapping it out for a Jasper motherboard. I managed to get a brand new one but I'm not sure it's reliable to use
IMO nope, because it’ll have a Zephyr board
@@RestorationRelaxation Are those the ones that get the RROD?, and what about Falcon chips?
@@SuperHitman55 yep. Falcon is better but not as good as Jasper
it's so nostalgic seeing such a great console after all these years.
No way I got recommended this video after doing the exact same thing, got a Halo 3 console for wicked cheap. Only difference is both boards are thankfully working. Swapped the jasper I already had into the Halo box and we're rollin. Just missing the Halo 3 HDD enclosure.
That's the coolest mod dude.
I did, never knew on how to fix it. My first Xbox 360, I still have it.
May it live forever!
Thank you, maybe one day I could fix it.
I got 3 of those with RROD ! Never send them back to the factory because of some special dvdrom fw that I applied to them 😂
Save them Obi-Wan Kenobi, you’re my only hope
Have an XBox that was made before the launch in 2005, it has the 3 RROD. Just bought a Halo 3 XBox off eBay, also serviced in 2010, same overheating problem, just put on new thermal compound and fixed.
Yay! Good job
Exactly what I did to mine a month ago. I put a Jasper with MX4 , runs cooler than my slim. Plus I get instant boot with Coolrunner and timing files of Octal. Question* why did u cut the plastic part on the case ? I didn't have to so that
I wanted to scrub the plastic bits so I removed the bit of metal shielding attached to it. They melt a bit of plastic over it to hold it in place
So good. Wish I could solder well.
I've custom painted our 360 (Zephyr) in a nice candy pink (and the controllers!). I'd love to cut out the disc noise.
Also love to know is anyone has had any luck/advantage from some 4cm noctua fans.
Love it
Thank you! I’d love to do noctua fans but I suspect they wouldn’t push enough air…if that becomes a mod though I’ll definitely give it a shot
@@RestorationRelaxation they have more static pressure I'm sure than the vanilla ones.
The challenge would be mounting them to ensure you get a tight seal and that all that pressure is pulling air from heatsink rather than the sides
@@xAKIMBOCURLYx I bet 3D printed brackets would probably be the way to go. I don’t have any 3D modeling experience unfortunately
great video. the cardboard isn't needed for the hard drive since the hard drive will be screwed down. May want to remove the cardboard so the hard drive air flow is not blocked. Dont want all that hard work to go to waste.
I would love to send mine in for repair if you still do this
Did you noticed, the halo 3 shell plastic is ticker compared to regular x360 shell.
Can you do a detailed guide on the CoolRunner install please?
Sure, I’ll add it to the list 😊
Did you change the dvd key on the jasper motherboard or on the drive?
I kept the drives paired and just swapped the bezels :)
My first 360 got the ring of death when I was playing modern warfare 2 back in 2008 man that was a sad day for me...
RIP 😭
You really managed to make an instantbooting zephyr RGH 1.2 with the notorious pll crash? Mad lad!
Why not put the metal piece that was connected to the shell back on?
I dont know why but orange clock cable from slim packet is long enough for phats maybe it has switched in factory
Maybe!
Wow that’s crazy I just did the same thing with this halo three Xbox upgraded to a 2 TB hard drive and did an RGH 3 hack
Lvl up for you
I am curious what that chip is you put in? can you give me rundown of what it does?
Solid video! It might have been better (and easier) to use RGH3 instead of 2.1.
Thanks! RGH 3 was brand new when I made this video so I didn’t bother, since it required a lot of extra software steps
@@RestorationRelaxation
True. And I saw that you did use it in a newer video! I love that the mods keep getting easier!
@@KL-zt6jx huh. That’s slang I’ve never heard before
Since the OG Zephyr motherboard that came in the Halo 3 edition was serviced by Microsoft in 2010, it will be very reliable since the defective GPU was repaired
Yes, finally
I still have a cropted problem, so they told me that it does not accept modification, please solve this problem
Hmm what happens when you read the NAND?
Not necessary the cardboard underneath of the hdd since hdd have screws on it it won’t move
ما زلت اعاني من مشكلة cropted بحيث قالو لي بأنه لا يقبل تعديل ارجو حل هذه المشكله
slight bit of a dust problem with this one, yeah
I named him Dusty
Toluelene for cleaning the heatsink. On a tissue and a few seconds later - clean as a whistle.
I can't tell you how many times I've punched a 360 apart. Not from anger or mis play or anything. The tabs that's are vertical can just be thumped out of its click-in tab. Saves you having to Jam a pick in each one and carefully manometer around them. Quicker too. Probably not the best but im all for efficiency
I have had 4 or 5 times and with the Halo 3 Case on
why'd you go with CoolRunner over RGH3?
Sometimes it doesn't work on phat consoles
@@retropcs88 to be honest I don't even remember making that comment at all lol, weird how that was 8 months ago and now I'm coincidentally heavily into 360 stuff again at the moment, I'm aware of RGH3's instability on phats but I think it would've at least been worth the shot idk, gonna RGH3 my Jasper relatively soon here to check out the stability first hand for myself, to each their own :) 🙏
@@rainbowdooche6957 I'm gonna RGH3.0 my Jasper Xbox 360 in April. Gonna try that first and if it doesn't work then I'm gonna go with 1.2
I found one of these for 10$ should I get one
Uh duh!
@@RestorationRelaxation the reason why I said that it's because I don't know how to solder and I don't have 10 bucks right but
@@RestorationRelaxation where did you but your from
I keep an xbox 360 in a room and i feel like someone upgrading it
Those unscrewing angles.
got given a elite 360 for free as it was dead-dead an i bought a white core one for a tenner that only had a sticky drive, cleaned it up an poped the elite case on it, even put tipex in the lettering to make it look like it was ment to be there, looked great when done, until sombodys kid fed it pepsi :(
cars
they exist
Cars?
"no no, he's got a point"
And I have The Xbox from 2005
not even the same console he put in the xbox case heatsinks are different than the ones he cleaned
The video clearly shows him swapping motherboards
What do you think of this Xbox?
Noiicee .... X360 fat is best .. i got still 2 jasper Jtag .. changed thermal paste n cleaned .. still goin strong 11yrs .. n jtag boots instantly...
@@fetzzo99 I’ve never done a JTAG, but hopefully I will someday!
It's great. I made a dual nand trinity recently and I love it
@@CLEVERCATMAN I haven’t done that either! Was it difficult?
@@RestorationRelaxation A little bit. We had to redo our soldering on the dual nand chip as the points are very small but other than that everything is the same.
i want buy,but i'm indonesian people how,this is perfeck
Man I really want to rgh my Xbox 360 falcon but idk how and I’m 13 years old 😂
🎮🇷🇺 200👍Layke
i know you gotta add some force to get some of these parts off, but the sounds are like, crack ohhhhhh.