Watch me RGH an E Series Slim Corona complete process!
Vložit
- čas přidán 14. 01. 2017
- My goal right now is to put together a tutorial for just about every console type - well, my "mission" statement of sorts is up on weekendmodder.com - so check it out! I'll be taking the recording of this and generating quality edited cut-down videos.
- Věda a technologie
Was getting prepared for a RGH setup before realising my console wasn't a Trinity and in fact a Corona 4GB. I've now ordered the necessary additions and will go through this video thoroughly.
Cheers for the video!
Hey I just wanted to say thanks for the videos, 2 buddies and I were trying to learn how to RGH our 360s (Just to get more use out of them.) and you've been a wealth of knowledge for us. Probably about to send in a few orders to your online store in fact.
your videos are beast ive used them all for tutorials
Pretty dope to see even the e can be modified now
Oh the post fix touches a solder ball got it. Thanks bro!
Yeah, *_Corona_*
Yep
thank you for the tut, very helpful.
Ive got an E Series that was manufactured on the 2014-9-15. It thinked it was an Winchester. But it was an Corona V6 so the modding can begin :)
So there can be different board versions with he same manufacturing date?
How’d it go?
FYI There is a yellow circle on the side of the DVD drive. If you stick a long pin or paper clip in there it will eject the DVD tray mechanically, so you don't need to power up. Also, you can remove the front section without pulling the face plate off from the DVD tray. You just have to angle the front section correctly to get past the face plate.
guys this is the best modder i recommend %1000 not a scam
I wish I got back into rgh modding years ago. I JTAG'd a PHAT but its been 8 years or so.
Too much effort for me, but props to you and the modding community. I have always had so much respect for the hardmod community for consoles. I know it becomes routine after the 100th console, but there are parts where you can completely mess up.
Thanks - and you're totally right.
I’m looking into getting into the rghing scene, just a few questions:
1: do I have to take the heat sink off? Like will it still be possible with it on (don’t have thermal paste)
2: how many watts should my soldering iron be?
3: how do I identify what motherboard a console is?
4: can all motherboards be done with the same chip or do I need different chips for different consoles? (So like a trinity with ace v3 and jasper with cool runner)
been watching your videos all day lol and learning this stuff. Does this also work with the JR Programmer v2?
yup, sure should
Do you know of any alternative points on the board for R2C7 if the pad has been torn off?
a little late to the party but want to get another 360, want to get the newest hardware 360 with the best RGH/JTAG compatibility
as well as a solid stealth service. Recommended setup?
Thanks!
Any slim RGH should serve just fine. Stealth service I don't personally use - but I hear Ninja is the biggest/best, though it's also pretty expensive.
I have a stubborn slim e v4. I can't get it to boot to xell. I get a reading with the multimeter when checking the postfix. Tried to write ecc with glitch 2 and glitch 2m and resoldered everything.
that corona name aged just like milk.
Does this work with a 360 xbox E year 2013-12-23?
10:24 Wait so a 4GB Nand Corona you cant use an X-nand or JR programmer ??
very helpful
At 43:41, do I put the black line to the metal around where the power cord goes in or where do i put it? When I put it on the metal around where the power cord goes in I get a reading of 126.
Thank u bro
hi
i am trying it but i do have sd tool try to make it with card reader but i do not have 68ohm resistor any alter for it
help me out
I have a question to see if you can help me. I have a corona V1 and xrun chip but I can't get the xell to start. I damaged the solder of the post fix and bought the postfix for v2 (I suppose it works the same) but I also damaged the one for reset ... and honestly, I have seen some alternatives but they do not work for me :(. You know if the post fix works for the v1? and rest reliable alternatives? thanks.
Hey man I’m starting to rgh3 a new console and mines a 16mb E. I saw in another video (Mr Mario) that you only have to bridge R2C10 if there’s no resistor and if you have a resistor on R2C10 then you don’t have to bridge R2C6 and R2C7 at all. Is that correct?
So 360 E's consoles before June 2014 should be corona and not winchester?. I take it Winchester boards still cant be RGH'd?
BlockABoots Nope, winchesters still cant be RGH’ed yet.
Hello, i just got a an xbox 360 slim (16MB) corona version 3-6. i've got everything ready to do the RGH with postfix adpater (it needs it) e.t.c. Looking at your video i realize that i also have WINDBOND ram (and this is NOT an XBOX 360 E). The MFR date of this unit is1 9/01/2013. DO I have also to check WB 2K when i will start using JRunner?
What are some alternate points can I ground the crystal to?
Yea i put it back again the xbox put typical me console did start but the disc drive stopped working i guess i will have to open it up again and check lol.
These E series consoles actually still has Infrared cuz im able to turn on and fully control my E series with my galaxy s4 (which has a built in IR blaster) using the "IR Remote Xbox 360" app form the google play store. So that technically mean that those E series consoles still has IR module or at least mine still does.
You sure you have an E series and not an S series? I've never seen and E series with an IR receiver that has worked with my remotes, but CNET agrees with you: www.cnet.com/products/microsoft-xbox-360-e/ saying that the E does maintain the IR receiver. So I guess I'm now questioning that.
good catch.
Yeah pretty sure its E series, I have the same model as in the video, and im able to control it as I said with my galaxy s4. The "IR Remote Xbox 360" app is basically the same as your remote, a digital version if i may say so, same layout and all...
So it would be best not to select SMC+ or any additional options other than glitch2 right?
which camera are you using whilst recording your videos. Please do share its specifications
Xexmenu, dashlaunch and dashboard
Better put on memory unit 4GB, or HDD Drive?
I put on memory unit like this tutorial, it just 750MB left memory storage. 🙏 Thanks for your advice.
IMHO - better on the HDD
Ok, i am back, again. I have managed to fix it to a point that it can boot up, but there is no image displayed on the tv
Hi, Great videos.... just one thing, the nand reader you made, would an sd extension cable work in the same way (cut of one end and seperate the cables ready to solder to xbox) or are there specific items you need... would really love a heads up... thanks
I didn't make that reader, it was designed specifically for the purpose of reading 4gb nands on Xbox 360 consoles. There are lots of plans and tutorials out there for making them from micro to full size SD card adapter though.
thanks
TheWeekendModder ive sended so much emails i want a modded xbox so pls reply
I have responded to every email I've received. Don't think I have any from you. You sure you sending to the correct address: weekendmodder@gmail.com ??? Also, if you want to buy - just buy at my store at www.store.weekendmodder.com
TheWeekendModder you didnt to mine :/ btw do you shipe to europe?
Hello, i have a 4gb corona motherboard xbox360 e and it dont boot, only the center green light is is on and the fan and the dvd drive and no hdmi output, the rgh chip x360run v1.1 led dont work. I measured the ground and the cpu and i measure 100 ohm not 30-40 , and if i remove the x360 run chip i got the same result . Anyone know what is the problem ?
My rgh corona xbox take long time to boot and some times dont boot at all plz help ?!
Im trying to RGH my Corona v5 with Ace v3 and nand-x but I keep getting the error ##......##.......###################### what should I do
do you sell consoles? I had a JTAG back in the MW2 lobby days and want to get a new one.
Just asking, what kinda level would you put this type of mod at? I'm interested in doing this since a Slim 4 gig is like 80 Aussie dollars but I don't really have any prior experience with soldering work.
As 360's go the 4gb corona is probably the toughest due to the number of wires needed to get the 4gb nand read and written. If you're a novice at soldering I'd suggest looking for some local help from someone who can solder proficiently.
I got this problem can some one HELP ME!!!!! PLEASE TheWeekendModder
Writing to E:\ from C:\Users\mary\Downloads\J-Runner v3 (5) Core Pack\output
anddump1.bin
Data error (cyclic redundancy check)
Am I safe with a Y2014-M07-D16 or is that a winchester, rumor is 2014 8 12 is the date for winchester
When I'm soldering the capacitor legs to act as a resistor, do I only touch the legs with the iron and let the solder fall of of the metal and hit R2C6 and 7 or do I do another process?
The whole point is just to bridge those unbridged contacts. Using the legs off the capacitor is just kinda a cheater way to span the gap.
If date on XBOX 360 is 2014-06-20 do you think it can be modded? I have one that I can buy if you can provide me wit quick reply? Thanks.
You have got very detailed videos. After watching your videos i put up some guts to open up my xbox360e n try ace v3 as u shown here. However, i need some help please.
I have done all steps from bridge to ace v3 wiring. Double checked all wires even with multimeter. Write ecc done, even redone the thermal paste.
After installing Ace v3, system has no hdmi output. Couldnt see boot to xell, hdmi no signal. Cpu fan runs, if started with eject button, ace v3 blinks green.
Please help me fix this blank screen.
@DarInfection Viral nopes, seams dead
Will try later this month.
Is there anything that i can do to fix this?
Good evening, excuse you will not have any videotutorial of a crown with winbond memories.
I identified my console as a 16 mg xbox 360 e and its the right age, so can you give me a list of all the parts I need? thanks if you get around to it.
weekendmodder.com/CoronaRGH.html
nice guide, ive watched it all the way. do you ship internationally? i live in europe.
I ship supplies and full premodded consoles internationally, but I don't do send in services internationally.
smart and cute children.
When you bridge those two points at 20:00 do I need that wire, or Can I just soldier it? And I have a 16 mb so what items do I need to rgh it? Like what should I buy from your site to rgh my console
If you can bridge it, then just bridge it without the bit of wire. Check here: weekendmodder.com/CoronaRGH.html
i installed JR Programmer v2 to jasper motherboard i think on correct points i connected power cable only no run! on jrunner Im getting the error: Flash Config: 0x00000000 Can not Continue now i see burning smoke on 2 smd capacitors on point C3B8 and C1D7 i don't know why motherboard demaged before motherboard working very well how to fix that ? pls help me
Does anyone know if there is a legit rgh send in, in canada
When you say scratch pen, do you mean, a sanding pen? Will I be able to use sand paper instead?
I would not use sand paper.
TheWeekendModder can you list every single thing you'll need for the complete process? Thanks
I've got supplies lists broken down by motherboard on my site www.weekendmodder.com
How much is it if I could buy a modded xbox 360 from you I would want a jasper with any kind of jtag or r jtag but I would be fine with any console.
I don't have any pre-modded consoles available right now. I'm really about trying to get people to DIY their own RGH.
is this the same process for the corona slim not the E version? and what was everything u used to do this like to the rgh stuff not tools
Yes, for all 4gb Coronas this process is the same.
Bro ware to buy that modules
Can u tell the names
what are the tools used
A got an e serie xbox MFR date is 2013-09-10 can it be hacked or no?
what rgh chip is used in this video?
hey ''TheWeekendModder'' can you please tell me what is the name of the pen u just used to scratch the motherboard here 14:48 ? thank you
Fiberglass scratch pen. I sell them on my store at weekendmodder.com/store/
can i ask you a question, i have an E same as yours in the video and mine is 2013-11-10, also the PSU says its 9.6A and the nand i think is in rectangle shape is it 16mb? is mine can RGH. Thanks. im new subscriber
Very likely is a modable corona mono and not the later winchester
hey, please tell me if it is necessary to use wire from a capacitor, or could i just bridge it by adding some solder from the one point to the other?
please advise
thanks.
You can bridge it any way you like - the capacitor leg is not special.
Hi, i have a corona v6, i put a x360run in it, it starts one time y works fine, but when you turn it off can't be turned on again. i have to wait whith the unplugged console about a day. Now i'm trying whit a matrix V3, and a muffin instalation, but i try whit a lot of timings , and I cant get it give signal, it just glitch. Can you help me please whit the timing??
Not being able to turn the console back on for a while suggest some sort of overloading self resetting something. Honestly - 360's are so cheap these days you might just get another one for $40 at gamestop and re-hack it.
Hey can the winchester motherboard be replaced coz mine is winchester and I wanna remove it and put the corona motherboard
You could "gut swap" for another motherboard - but at that point it's basically another console.
Sir please help me install rgh ...i was bought an xbox original and i dont have a game please help me sir🙏🏻
Boy this is a 360
For the Winchester model can you flash mod the DVD drive?
No.
@@TheWeekendModder ok :(
If I was to buy a Xbox and send it could you mod for me ? Or do you have any for sale?
That 4gb sd tool on your site, will that work on a Xbox 360 e 4gb mfr date 5-25-2013? My nand is a skhynix and I gotta bridge just incase I bought a post fix. Lmk asap @theweekendmodder
Yes.
TheWeekendModder do you have the sd tools in stock? Imma buy 3 of them, also how did you make the quick break connection, you should sell them I'd buy a few.
Yea, they're instock on my website...
TheWeekendModder
I want an XBOX360 console with more ram, is there a way to solder more ram chips in the back of the motherboard? Or to replace those ram chips with more ram chips?
Also I seen that they can connect a power supply and works, so I was also wondering if they can use a power supply with less energy, like a 120watt power supply
So I have a 16mb E slim MFR Date 2013.09.11 . And I dont know if it is a wichester motherboard because I dont have a 48 torx screwdriver to pick the fan of. So how likely is it gonna be a winchester model?
2013 Dates are mostly Coronas.
TheWeekendModder Ah good thx
How do you find/access the nand drive in the settings, mine won't show up
Sounds like whatever method you're using to read the 4gb tool isn't working or not set up right.
I was so excited to do this then I checked and I have a Winchester model :(
F
@@LenoxFilms so I went up to my local CEX or if your American GameStop and bought myself a falcon
can this tutorial be used for the corona v2 4gb version (s series)
Yes, the process would be the same. Though you may or may not need a postfix adapter depending on the specific model of 4gb S series Corona that you have.
Watching these streams kind of upsets me. These new builds boot so fast. My Trinity takes forever. I haven't had a boot in less than a minute ever since I received it.
It support 2015 model
hi I'm from India and I bought Xbox 360 E 4GB from Amazon MRD is 2015 and I want to mod it is possible and tell me how to know is motherboard is Corona or Winchester without opening console I'm afraid I could loss my warranty please reply ASAP..!!! THANKS
Very likely a Winchester - it's not possible to say for 100% without opening it.
Plz ans I'm trying to find out how I can rgh my 5 year old Xbox console yes it's a slim not the e it's a rgh trinity I checked and I want to know if I can rgh my consel
Yes, all Trinity consoles can be RGH'd.
TheWeekendModder thxs!
TheWeekendModder I had my rgh since 2nd grade I'm 13 in 7th grade I want to get an rgh so I was wondering my Xbox can be rgh thanks man
How would you be able to tell the differences between a corona and a Winchester mother board?
They physically look different: team-xecuter.com/forums/threads/147484-New-Xbox-360-Winchester-Motherboard
@@TheWeekendModderthe link is seized bro 💀💀
I am new to modding and am in process of making rgh out of e console and was wondering can u send me like list or something of all the stuff I need, I need a screw for the smaller screw and I stopped at part start to talk about motherboard, can u send me list of all the tools I need
Start here: weekendmodder.com/identify.html
Hi.
Do you know the fix for the problem of turning on but not booting up of an Xbox 360 E model(blue/500GB/16MB NAND), RGH modded, MFR 2014/08/18?
I tried with removing anything but no luck.
It has working fine but in time has progressively started to boot slower and slower until nothing.
Sounds like maybe a glitch chip gone bad? Or a wire connection come loose over time?
@@TheWeekendModder I've checked the wires and all seem fine, except the one next to the APU(under the heatsink), that one I didn't checked.
There's really the chance that the glitch chip(Ace V 3.0) to be bad?
How about the possibility that NAND should be bad?
The defect(slow boot times) started progressively over time up to the point the Xbox didn't worked at all.
I believe I bricked my E consol when I tryed this a few weeks ago I keep getting errors when I try to create the ecc.. it wouldn’t boot after that also tryed rewriting original band dump1.bin any suggestions?
If you rewrite your original "nanddump1.bin" and then disconnect power from any glitch chip you have installed the console should still boot retail. If it does not - that indicates an issue with something else you've done, perhaps damage while soldering.
TheWeekendModder I think I might of wrote dabs dunk #2 or something when I try to connect or rewrite the nand it gives me errors
I have a 2015 xbox 360 e. Am I screwed?
Possibly. With a MFR date that late the only way to know for sure would be to open it up and check the XCGPU.
By the way, the cover art is fixed in an updated version of freestyle dash.
Cool!
Thats my same console even 4gb, but I have another hdd for 250 gb
He's talking about the NAND not the hard drive.
Will u do mine if i send to you?
Should I get the v1 or v2 postfix adapter? can both be cut?
No functional difference between them. Yes, both can be altered to ensure fit like in this video.
I get like 74kohm on my post fix. Is that OK?
Update: seems to work fine so far
everything ok, but why copy xex menu to the console. then run the lunch dash and just run fsd. I run fsd from usb, copy fsd to disk and file lunch.ini and that's it. used AutoGG.
What is the x clamp removal tool called
"X-Clamp removal tool" store.weekendmodder.com/index.php?route=product/product&path=60&product_id=119
What is the name of the tool you used to read the nand ? Or where can I get one ?
That's a Maximus 4gb kit. I usually have them on my store at www.store.weekendmodder.com but I'm sold out right now. Got 10 more on the way that will be in stock in less than a week.
I wonder if my friend will sell me his for 10-20 bucks it has rrod overhesting i think it needs a new fan theres no air coming out and fan dont spin so thats a easy fix,also does this have to be a certain dashboard to mod it
nope. dashboard does not matter.
@@oz673 so i can just can get any xbox 360 e console and mod it
coolgamer 6554 if it’s below the manufacture date of 2014-8 then yes
What kind of screw driver bit do you need
T8 and T10 security bits.
If we buy a jasper will you add a Wi-Fi adapter?
I don't have any to offer to sell you, sorry.
TheWeekendModder ok. If I buy a jasper can you add some games and mod menus if I buy a usb stick?
I preload a base set of tools only, I can't participate in piracy preloading games. check out www.faq.weekendmodder.com for details
How much is it to mod if I send u mine
Can you rgh my 360 e ???
I'm buying original cd and they are costing me alot
Ya, check out my send in service at www.sendin.weekendmodder.com
my 360 wont boot after installing the ace v3 so I cant get the IP address, any suggestions?
I have the same issue, any possible solutions ??
I m unable to find ace v3 and sd tool plz help me where can I get this it's no on AliExpress nor Amazon
www.store.weekendmodder.com
TheWeekendModder but I live in INDIA will u be able to send those stuffs to me here
i have xbox 360 e model 1538 mfr date 2014_10_27 can i do it ? rgh or jtag
With that MFR date, you'll have to open it up and inspect if it's a Corona or Winchester.