Omg, you saved me. I've modified 7 Glocks. This gen 5 43x mos just got me. 1/2 turn too much on a adjustable trigger housing, thought I was, well you know. Great save regular guy that sounds like an 18 series..
Gotdamn. I'm sitting here panicking because I'm trying to install a trigger and I put the slide on and it's just dead. Didn't know how I was going to get that damn slide off. But I did. Thanks man!!!! LOL
i got a p80 g21 and i have the same problem except when i took the backplate off the saftey plunger fell into the gun how you said dont let it. i cant take the slide off because the plunger catches on the trigger. any tips ?
What if the trigger is stuck forward and you can still take off the slide? I’m having this problem and no matter how hard I pull the trigger won’t move.
Hey bro. I changed my backplate and got my slide off thanks to your video. However, my trigger will not depress anymore at all. Glock 19 gen 5 performance trigger. Can you please help?
What if the slide won’t rack so u can’t do the backplate method is it possible to just take the pins out and remove the upper from the frame that way ?
Hey my guy…question, why won’t my g26 slide won’t rack with the locking block on? It works (feed and eject) with the front locking block off..what am I doing wrong ? Please help
Boss man my sleeve spacer is torn apart literally so this option doesn’t work for me because I can’t get the back plate off please help my Glock 21 won’t fire or click it just resets
Hi, im experiencing this same problem the trigger getting stuck forward on my polymer80 19. At times the triggers even becomes hard to pull like really hard. Can you link me to a fix or help me out on what might be the problem to this happening. It’s my first polymer80 build a friend helped me by assembling it but he couldn’t figure it out and gave up. Please help
I put mine back together without the slide release, firing pins out and slide still wont slide forward with tabs depressed. Any ideas would be greatly appreciated
@@JARG question for you...cleaned a few glocks uo yesterday...had a problem getting slide back on glock 20..watched a video...ends up I had to turn the slide over and depress a pin...it went on fine after that...have you ever ran into that problem before?
Omg, you saved me. I've modified 7 Glocks. This gen 5 43x mos just got me. 1/2 turn too much on a adjustable trigger housing, thought I was, well you know. Great save regular guy that sounds like an 18 series..
Haha nope never an 18 series. Regular 11 series before
Gotdamn. I'm sitting here panicking because I'm trying to install a trigger and I put the slide on and it's just dead. Didn't know how I was going to get that damn slide off. But I did. Thanks man!!!! LOL
You are a life saver
Thanks I saw this then forgot about it
Thanks!
Worked! Thank you!
Thank you my friend. That worked.
Glad to hear
If it helped Like SUB and watch more videos
i got a p80 g21 and i have the same problem except when i took the backplate off the saftey plunger fell into the gun how you said dont let it. i cant take the slide off because the plunger catches on the trigger. any tips ?
If unloaded… turn upside down and let plunger fall in
Trigger is not stuck , the slide will not come off only with your technique
Then you got another issue
What if the trigger is stuck forward and you can still take off the slide? I’m having this problem and no matter how hard I pull the trigger won’t move.
Hey bro. I changed my backplate and got my slide off thanks to your video. However, my trigger will not depress anymore at all. Glock 19 gen 5 performance trigger. Can you please help?
@@DistanceZero99 trigger is back or forward
@JARG trigger is forward, it resets when I dry fire but won't stay depressed or stay back at all
What if the slide won’t rack so u can’t do the backplate method is it possible to just take the pins out and remove the upper from the frame that way ?
Sounds like wrong Gen barrel
@@JARG what do
You think I could do to separate the upper from the lower
Hey my guy…question, why won’t my g26 slide won’t rack with the locking block on? It works (feed and eject) with the front locking block off..what am I doing wrong ? Please help
Likely wrong Gen Barrel
Boss man my sleeve spacer is torn apart literally so this option doesn’t work for me because I can’t get the back plate off please help my Glock 21 won’t fire or click it just resets
Take the slide off. Depress the plunger and press firing pin forward to take the pressure off the back plate
Can you see the plunger through the mag well
I believe so
Hi, im experiencing this same problem the trigger getting stuck forward on my polymer80 19. At times the triggers even becomes hard to pull like really hard. Can you link me to a fix or help me out on what might be the problem to this happening. It’s my first polymer80 build a friend helped me by assembling it but he couldn’t figure it out and gave up. Please help
Post a video of what is happening on your channel and send me the link
What do I do if the take down pins are locked in the middle and won’t go up and down no matter what it do?
Means you probably have wrong barrel
Will the slide move?
@@JARG yes the slide moves fine it locks and everything but the takedown pins won’t move at all
I appreciate your reply as well… I’ve been looking all over and I can’t find nothing…
Did people really not know you could take it apart without pulling the trigger at the same time???
I didn’t, I put a slide on without the trigger or trigger housing even being in the gun. Lost my mind trying to figure out how to get the slide off.
I put mine back together without the slide release, firing pins out and slide still wont slide forward with tabs depressed. Any ideas would be greatly appreciated
@@Yh-kg8fr what did you do to fix it ?
@@n3on170 having same problem
@@Gigwork_trapper I didn’t have my slide lock or anything so it was pretty difficult but I eventually got it by removing the backplate and firing pin
Is that a rtf 2?
Yes it is. Had it for a long time. It’s a good piece.
@@JARG I have one...definitely like it...dont see many around
@@JARG question for you...cleaned a few glocks uo yesterday...had a problem getting slide back on glock 20..watched a video...ends up I had to turn the slide over and depress a pin...it went on fine after that...have you ever ran into that problem before?
This is still new to people. Must be new glock owners.