Was curious on how you change the settings and unlock the speed, I had emailed you earlier this morning, and did end up ordering one so this will all be good to know eventually when I feel comfortable unlocking the speed, looking forward to more videos on it!
the scooter also shows the amount of trip you taken along with the mileage ridden and those two things we can't erase or reset??? Just like the one on a car or we are able to easier than resetting it on a car.
anyway to tell if the two circular nuts/ or bolt is loose that we have to tighten before riding??? if loose will handle bar make a sound or become loose and move a certain way???
It takes over the throttle if you hold a constant speed for 4 seconds. I don’t recommend using it. I have on other scoots and have been surprised when I let off the throttle and the motor maintained speed because cruise control engaged and I hadn’t realized it.
What do you mean by cutting out? It shuts off or do you mean top speed is only 25mph? If top speed is only 25, make sure P08 is set to 100. Make sure yellow push button is NOT pushed in (pushed in is Eco mode). Also use gear 3 on the display. Should do about 35 in single motor mode and at least 45 in dual motor mode.
It would accelerate fast and the reduced the acceleration so it wouldn’t go over 25. I changed it to full and haven’t had an issue since. I guess I should have charged it out of the box but I was too excited.
i'm already hitting 35mph on single motor mode gear 3 with only motor power output set to only 50%. so does that mean 100% motor output i may be able to do double that speed??@@Desert-Ecruising
what voltage is a dead scooter battery for this scooter will be at? or when it is at half battery how much voltage will it show? one bar battery and two bar battery is around how many voltage?
Don’t use the bars, it shows you the exact voltage in the display. As for your other questions, please watch the video I did that goes over battery care: czcams.com/video/9j4RCdTFQ5Y/video.html
@@Desert-Ecruising my scooter finally done charging trying figure out which gear and mode to use to test the range of it to see if I can get it to as close as it's advertised 87 miles range... I'll be happen if I can get 70-75 miles.
Set P08 to 100 Make sure yellow ECO button is NOT pushed in. Set to gear 3. Should be able to go 35mph. Push red button in for dual motors and you should be able to go 45 to 50mph (75 to 80kph)
@@agustinnunez3478No. the tires do not matter as long as they have air in them. The motors are very powerful. Single motor mode in 3rd gear should go 56kph. In Dual motor mode on 3rd gear should go 77kph. Again, yellow push button NOT pushed in.
@@MissHitAllTheTime I list all the settings in this video you are commenting on. It’s P09 but it may not be used. So far I haven’t noticed that it is very strong like on my Qpower scoot. I’ll have a chance to test it next week.
I have a new ti30, the e_break seems to engage only over around 22mph, im guessing that is so e brake doesn't throw you at lower speeds where itd be more pronounced with such massive motors, im a 250lb rider so I think its just strong enough at setting 1(very smooth feeling in combo with zoom breaks), i would imagine e brake feels stronger for lighter riders, i like the fact that it should keep my breaks cooler and lasting longer, i doubt it makes much difference in range from regen though maybe like .1 mile or something negligible. This scooter is amazing, i dare not put mode 3 on though! It does ~37mph in mode 2 and gets there in a few wheel spinning seconds (:
I’ve still only ridden mine once. Once I’m finished making it the way I want, I’ll start doing more ride videos and experiment with the settings for brakes etc.
thank you it’s helpful
Was curious on how you change the settings and unlock the speed, I had emailed you earlier this morning, and did end up ordering one so this will all be good to know eventually when I feel comfortable unlocking the speed, looking forward to more videos on it!
what p setting did you put your scooter in
@@alvaromorales5758P08 needs to be set to 100 for full speed.
@@Desert-Ecruising thank you i had it like that but the eco mode was wrong 🫡
@@Desert-Ecruising I wonder why it comes with 25% or 50% set at p08?
Some places have a max speed law for scoots. Limiting the speed by the setting allows them to ship to those places by stating a lower max speed.
the scooter also shows the amount of trip you taken along with the mileage ridden and those two things we can't erase or reset??? Just like the one on a car or we are able to easier than resetting it on a car.
anyway to tell if the two circular nuts/ or bolt is loose that we have to tighten before riding??? if loose will handle bar make a sound or become loose and move a certain way???
I would think it would cause more play in the stem. Maybe a wobble at higher speeds.
If i apply these settings, will my laotie ti30 brick? ive seen it happen on other scooters, not laotie though so im kind of scared
Great video! 🎉good job👍
what does cruise control do for the scooter? people recommend not to use 1 and that its dangerous?
It takes over the throttle if you hold a constant speed for 4 seconds. I don’t recommend using it. I have on other scoots and have been surprised when I let off the throttle and the motor maintained speed because cruise control engaged and I hadn’t realized it.
i changed top speed settings and it did go faster (not as high as i was expecting) but also faster from stopped. appreciate the video
No problem. You should be able to hit at least 45mph with dual motors and gear 3.
wonder if it can go 60mph since i'm light 125lbs@@Desert-Ecruising
No. 50 probably but not 60 as stock.
I did those settings changes but mine is still cutting our at exactly 25 mph. Any idea what I need to do to stop that?
What do you mean by cutting out? It shuts off or do you mean top speed is only 25mph? If top speed is only 25, make sure P08 is set to 100. Make sure yellow push button is NOT pushed in (pushed in is Eco mode). Also use gear 3 on the display. Should do about 35 in single motor mode and at least 45 in dual motor mode.
It would accelerate fast and the reduced the acceleration so it wouldn’t go over 25. I changed it to full and haven’t had an issue since. I guess I should have charged it out of the box but I was too excited.
i'm already hitting 35mph on single motor mode gear 3 with only motor power output set to only 50%. so does that mean 100% motor output i may be able to do double that speed??@@Desert-Ecruising
what voltage is a dead scooter battery for this scooter will be at? or when it is at half battery how much voltage will it show? one bar battery and two bar battery is around how many voltage?
Don’t use the bars, it shows you the exact voltage in the display. As for your other questions, please watch the video I did that goes over battery care: czcams.com/video/9j4RCdTFQ5Y/video.html
@@Desert-Ecruising my scooter finally done charging trying figure out which gear and mode to use to test the range of it to see if I can get it to as close as it's advertised 87 miles range... I'll be happen if I can get 70-75 miles.
For maximum mileage: 1st gear, Eco mode on (yellow button pushed in),Single motor mode (red button out). Stay no faster than 15mph and you’ll go far.
Low voltage cutoff in manual is 50,5v.
It’s a good idea to not push the battery to the low limit.
@@Desert-Ecruising ye but i have issue. When i have 57v and drive with turbo+2 motors my voltage drop to 52v and this is bad
@@esiuu7973that is normal due to the draw on the battery under load. The important thing is the voltage when not moving.
@@Desert-Ecruising my voltage move up and down by .1 V when scooter is turned on but not moving lol jumping...
Thank u so much my user manual doesn’t tell me anything about it
Como hago para que corra mucho más rápido?. Tiene velocidad dual y el turbo pero siento que no jala mucho.
Set P08 to 100
Make sure yellow ECO button is NOT pushed in.
Set to gear 3.
Should be able to go 35mph. Push red button in for dual motors and you should be able to go 45 to 50mph (75 to 80kph)
@@Desert-EcruisingPresiono duales pero no tengo la velocidad.
@@agustinnunez3478Is P08 set to 100?
Also, set to gear 3 on the display, red button pushed in and yellow button NOT pushed in (yellow button out).
@@Desert-EcruisingSi, pero nada. Será que tengo que modificar en las llantas ?
@@agustinnunez3478No. the tires do not matter as long as they have air in them. The motors are very powerful. Single motor mode in 3rd gear should go 56kph. In Dual motor mode on 3rd gear should go 77kph. Again, yellow push button NOT pushed in.
Megawatts 🛴
You’re gonna have to stop over pretty soon. We’ll take the ti30 and Qpower out for a ride.
@@Desert-Ecruising what is the motor assist brake setting do for the scooter?
@@MissHitAllTheTime I list all the settings in this video you are commenting on. It’s P09 but it may not be used. So far I haven’t noticed that it is very strong like on my Qpower scoot. I’ll have a chance to test it next week.
I have a new ti30, the e_break seems to engage only over around 22mph, im guessing that is so e brake doesn't throw you at lower speeds where itd be more pronounced with such massive motors, im a 250lb rider so I think its just strong enough at setting 1(very smooth feeling in combo with zoom breaks), i would imagine e brake feels stronger for lighter riders, i like the fact that it should keep my breaks cooler and lasting longer, i doubt it makes much difference in range from regen though maybe like .1 mile or something negligible. This scooter is amazing, i dare not put mode 3 on though! It does ~37mph in mode 2 and gets there in a few wheel spinning seconds (:
I’ve still only ridden mine once. Once I’m finished making it the way I want, I’ll start doing more ride videos and experiment with the settings for brakes etc.