Have a POWERTRAIN ERROR? This could be the solution. (COIL PACK INSTALL)
Vložit
- čas přidán 12. 09. 2017
- As seen in the previous video about this, I go through 3 ways your car could be showing a POWERTRAIN ERROR message.
In this case, it was faulty coil packs.
Any questions or comments on what you would like to see next, leave a message below!
Now on instagram! @thepandagarage
Also Facebook! / thepandagarage
Check out my other channel! / @pandaexplores - Auta a dopravní prostředky
thats is perfect experince sharing about holden v6 Power Train problem thank you
Thank you for your help, youre a champion putting this video
Cheers brother, was stressing out hard but turned out it was just my key. Saved me a few hundred dollars!! 👍👍👍
Glad it helped!
How did you fix it please Dave ?
Hi is there any way to remove the breather tubes from the valley cover on a Alloytec 3.6?
Thanks for the video, just got my coils and sparks done by a mechanic for $870, ouch i should've tried to do it myself. next time i will know.
no worries! ouch! thats so much money! It's well worth spending the time and doing it yourself. thanks for the comment!
Hey mate I've got a V6 Ve Calais 2006, I've had the stability control, the ABS, Brake and Alternator light flash on my dashboard, but not at the same time. I checked the error code and it came back with powertrain error code. Would any of the issues you showed cause all of those errors or am I looking at a new powertrain module?
I have a VZ SV6 Alloytec 190 and one of my coils pretty much exploded and loss of power running on 3 cylinders shortly after i got home from the supermarket after deciding to nurse it home the "check powertrain" came up on the digital display before i found out it was the coil i put a scanner through to the OBD port which came up with 3 codes for injectors and then found out from a single coil it had collapsed the ECU which wasn't repairable after replacing all the coils and getting the ECU replaced the expense nearly gave me a heart attack lol! Great vid man!
+Daniel Hayden oh wow! Sounds like it’s been a universal issue with all of these engines! Thanks for the support!
It seems like it! Isn't the Alloytec the best engine ever made?! kidding there not bad when everything works!
+Daniel Hayden haha greatest engine of all time!
I have a power train issue on vz holden the speedo stopped working and not showing what gear you are in any help cheers
Hi my vz is playing up you can get in and start it drive around then turn it off it won't start and when your turning the key it doesn't do anything then i leave it sit for a hour or two go back and it will up again do you have any idea what could be the problem i have changed the key and barrel checked the battery and starter motor and i don't know what eles could be?
my 2005 commodore surges when I dump the right foot down any ideas
2004 Mazda 4.0
New:
Fuel Filter
Battery
Coil Pack
Spark Plugs
Plug Wires
Injectors (6)
Fuel Pump
Mass Flow Sensor
Idle Air Control
EGR sensor
Throttle Position sensor
FLASHED ECM
OBD2 shows ERROR. And runs like dogscrub after "Hunting" for idle.
After each ECM Flash shows different codes for parts ALREADY replaced. Always a different code. Is there a Powertrain reset?
Any suggestions would be greatly appreciated. Thanks in advance from America-
I just bought a real cheap vz adventra and the car yard guy told me there was a timing chain issue I bought a obd2 scanner and it came up no codes so if you are right and its a key, plugs or coil packs you are going to save me so much work although ive already bought everything I need to do the timing chain job but it will eventually need to be done one day atleast I have the parts ready I did notice my keys look very old so ill try that first and ill probably put in a new set of plugs aswell thanks for the tips dude
How would you fix the key issue please ?
Hi 2005 vz1tonne Ute powertrain appears with alarm yet engine is running seat as any ideas ..
First and foremost id like to suggest get your battery tested/replaced it might start the vehicle but may not have enough power to run the vehicle efficiently (the powertrain problem i had) how i found that out was i replaced the sparkplugs and coils like old mate suggested and the problem was still there eventually over time the battery drained to a point i could no longer start the car so i replaced the battery and voila its been 2 months now and the problem hasnt returned
Vy v6 auto rolling down hill when applying power when going up the other side around 100 klm get hesitation & like banging as if missing ???
Do you have an email to ask further questions
Hey man have problem with powerchain first started the car then engine started shaking then turned off car then started again then was no shaking after that pls give me advice
So you heard rattling come from engine for a few seconds? Especially from a cold start when not driven after a few hours.
How many km do the original coils last for?
I have a 2006 VZ Crewman showing a SO2 fault (bank 1 Sensor 2) the fault has been there for a few weeks but today it started to run really rough and stalled on me a few times. I put my OBI and the codes read: crank-cam position correlation, multiple engine misfire detected.
The problem has happened a few times with cylinders 2, 4, and 6 misfiring. I clear the codes then it happens again (instantly) but with cylinders 1, 3, and 5 misfiring so the issue is bouncing from 1 bank of the engine to the other.
Also the exhaust sounds different since it occurred, almost dronny or like it has a hole directly behind the headers??
I just purchased this car 2 weeks ago!!! Can anyone help with identifying the fault and what I should do??
Thanks tried the spare key and problem fixed.
Hi. Mine only appear when driving fast or accelalarating fast while changing gears, especially gear number and five. When I stop ...it disappears. Then start doest not appear. Sometimes I can drive two hours then shows up...sometimes does not .
Hey mate i just had the timing chains replaced on my vz commodore, and it drove perfect after instal for about a 20 Minute drive except i got a powertrain message on dash. Then the next morning started it up and it was running like total shit like it was missing on 1 or 2 cylinders... had the coils replaced and spark plugs.
It came abit better still backfires and basically is acting crazy idels up and down by itself at times or just starts reving higher and higher.
I could be wrong but was the gears for the timing chain lined up properly? That might be causing the issue
Does it still misfire Jamie?
Hi, I have had a resent powertrain error. I have replaced all coil packs and plugs but the error still comes up and the car runs rough. I have been told by a friend that one of the injectors could be blocked. Do you think it is possible. Hope you can help. Cheers.
02 sensors ?
Hi I have a VX SS commodore and recently all warning lights in my dash came on and then I lost speedo fuel gauge had no power windows no indicators and car started running real rough and now I put a fresh battery in the car and when I turn key it makes the tick tick sound when battery is flat what could be my problem
Yeah it’s definitely worth trying a different battery to see if that fixes the problem. Sometimes it can be the most basic problem and the easiest solution
I have a 2006 holden it started then turned it off now wants to fire up but just turns over and no start
hi i think is this my problem i my key wont start car but when i coss starter motor it starts and will start with key again for little while ever since this key problem the power train light comes on would you reckomend knew plugs and coils
It’s possible your battery in your key is going flat. Maybe try that first before getting into could and plugs. Worth a try first!
hey mate, my ve got same motor as vz. I had low oil error, change the senor and it was good for 6 months and came back on, got replacement from supplier and got few more months b4 it came back on, been drive 18 months with engine check light on, replaced again, but stay on. funny as it does not show code anymore, as I deleted it on my reader. I can clear log and it go away from a minute to a couple hours. been told its a serious problem with oil presser but been driving over 2 years like this. tried pulling battery out for few hours
Hmmm I haven’t heard of that before! I’m not too sure what to tell you.. do you have any oil leaks around the engine block? Might be causing your pressure issue
hey I've had a powertrain light come on for over a year. Holden told me it was a oxygen sensor but after replacing all four sensors no fix. since then over intervals I've had all platinum plugs changed and two new keys. plus I just had a ignition problem which we changed key and coil. still no fix. Any other suggestions
There is a possibility that your oil pressure sensor maybe on the way out, not too sure if that would set off the PowerTrain error. Other than that it might be best to check out some of the local forums about this issue, they can be very helpful
The problem is either fuel injector check all the cable wires u can find which fuel injector has got the issue
Sorry man . didnt mean to hurt your feelings. Nice T shirt . Good show.
My 6ltr gen 4 just started showing powertrain fault after a jumpstart. Any ideas?
Nvm, cleaned key and immobiliser ring and Voila, shes good!
Hi there I have a 2005 SV6VZ the problem when I am cruising I put my foot down and it shutters like a mess and no power unless I plant my foot down
I do have trouble with my key turning on now if I take it out of the ignition I have trouble turning ignition back on
Powertrain issues are not always this .. I just worked on a VZ commodore with this motor .. powertrain is to do with transmission and also driveshaft .. it can be coil packs however I pulled the coil packs in this car I’m working on and tested coil packs with multimeter as they were not that old .. on taking my customers car for a drive after testing coil packs .. gapping spark plugs properly .. the car was going clunk clunk clunk could hear it and feel it with arm rested on centre console .. I then put car up on ramps looked at the centre bearing it was stuffed … I then took it for another drive as soon as I put my foot down hard thump thump thump …. Power train light comes on… centre bearing issue as powertrain is driveshaft being unbalanced causes an error code vibration through driveshaft .. I bought a genuine centre bearing smashed the drive shaft apart .. and installed a genuine centre bearing on driveshaft cost $70 on eBay .. I recommend genuine as it’s an important part … anyway I had RAA roadside come along and tell my customer it was a coil pack issue .. when it wasn’t they even took it for a drive really bizzare they didn’t hear the clunk … doesn’t surprise me RAA miss-diagnosed I applied for a job at QLD equivalent and was told By RACQ I was over qualified in Automotive that they didn’t want technicians qualified in the trade was quite bizzare that job application
Hey. My Holden VZ Ute yesterday just came up with this error and the "engine temp hot". Coolant is fine, sparkies, and coils changed one month ago.
I'm hoping it's the key issue, as the thing is missing the botton covers (bought car 2nd hand). Or temp sensor.
Would the temp sensor make the car think it's overheating?
Many thanks 😊
+Zoe Archer hi! Might be worth checking your temp sensor as it may be becoming faulty. Because VZ v6 engines cars have trouble using obdII readers, I’d say try and replace the temp sensor first and see if that’s the solution. Let me know how you go!
Panda Garage oh thank you. Your a gem. Your videos are great. Keep it up 😊
+Zoe Archer thank you Zoe!
First thing i would've done is make sure to get all the air out of the cooling system, by the bleed valve on top of the radiator, warm your car up and open the valve slowly to let air out- soon as coolant comes out close it up again, be carefull of the hot coolant though. I had that problem with my car, the temp gauge would go up.
I bought a Holden crewman,and 1 week later I got engine light on check powertrain,and I'm worried I've bought a problem car,it has 339000 km on it too,well I bought it off a mechanic I know and I took it back and he said he'd change the points and leads I think ,I had an idea it could be the coil,but I don't know,I'm hoping for the best
my vz has srs fault and powertrain come up soon came to running on 5 cyl changed spark plug and coil still doing it, could you think of a reason?
same problem with my vz, itll be ECU like mine. I changed over coil packs and spark plugs....still same problem. got second hand ECU and it fixed
Had powertrain fualt used a scan tool and said one of the o2 sensors where buggered so replaced it and havent had an issue sincs
I’m not sure why Australian cars have this weird thing that if you change the coils sometimes it doesn’t recognises it’s been done. Have you all tried scanning the car then clearing the issue? Might have to use one of the bigger type of scanners, I just remembered that my basic one doesn’t like scanning vz computers well!
I just replaced my spark plugs and 1 coil pack as it fell apart themat power train was not on until after i done all that why would that be idials ruff now too
Did you use the right spark plugs? Or More then one coil might have been faulty, you could have a vaccume leak somewhere or didn't replace the intake manifold gasket or get it on properly, or it might have just thrown up the code and is running in a kinda safe mode.
Is it okay to drive with a check powertrain warning for a little bit?
Probably not the best thing to do, coming from experience!
Hi I was just wondering with this comment how much damage can it actually do I just brought a car to realise he has driven the car with this issue i havnt driven it since and waiting on parts ....
What buttons do you press to turn off the power train error ?
not too sure what you are asking here?
@@PandaGarage can you rather than fix this issue just press a combination of buttons if so what is the combination to press? PS Mum I love you if you are reading this.
Power Train light just turned on yesterday. It turns on as soon as I put the car into drive or reverse. Car seems perfectly fine but still nervous when driving to buy essentials. Don’t know any good mechanic’s at this moment because of lock down here in NZ. I’m hoping it’s just the key because the buttons on it don’t work. I have to put the key into the door to lock & unlock 🤦🏽♂️ Please help me, it’s a courtesy car too that I’ve had for 5 weeks! 😕
Sounds like it's just your keys $112 locksmith should fix it
Hi I had this problem the mechanic fixed it or so we thought a month later coil no 4 went and then last week coil no 1 went . We put new plugs in also . Any idea why they keep going even after a short time ? Even after mechanic fixed it straight away the power train light came on again I took it back he said it will be fine but it wasn’t .
I think they had an issue with cheaply made coil packs that kept playing up. Might be best to try some aftermarket ones. That may fix the issue
Ok yeah my mechanic has put the good ones in about $100 a coil And as soon as I left the carpark the light came straight back on . I took the battery negative terminal off for 10 minutes today the first time i started car the check powertrain msg went but when I turned key off and back on it was straight back on .... really doing my head in this one
What brand coil would you recommend ? I may try another brand
Hi i have vt 2000 ecotech v6 147kw it crank but won't start, i change fuel pump, dfi module, ignition coil, ignition lead, CAS, IAC valve but won't start can help me to the problem
Have you checked your spark plugs? This could be a big reason why your car isn’t turning over
@@PandaGarage
I buy one new spark plug and remove ignition lead and put new plug in lead and attached to -ve and crank the engine but there is no spark in new spark plug
How is your battery? If you have replaced everything else it might be the battery doesn’t have enough charge
Hey mate, I have the same problem happening to my car and can't figure out what it is. Done the crank angle sensor, dfi and coils, battery is good but still no spark?. Did you sort yours out kulwinder?.
Mine has no spark as well. It is an l67 supercharged
Metal manifold gasket are reusable
I have the message power train.
Symptoms hit bump speedo stops working fault comes.
Hit bump speedo starts working.
Plus trans stops automatically shifting.
Can change gears moving the tee bar.
No codes. Checked plug and trans shifter switch.
Did get fault once in heavy rain.
Ordered new trans shifter switch and trans speed sensor.
I will let you know if it gets sorted.
I had that motor in my 2008 VE and I sold it with 360,000 and never change the coil packs or the timing chain. Funny I had mechanic do the services up to around 200k. He was shocked that didn't have an oil leak. Around that time money got tight and I started using semi synthetic oil. I only change alternator, starter and brake master cylinder. I purchase second hand ex cop car with 60,000 and around 6 months old.
Forgot engine mounts
My question our 06 vz commodore just all of a sudden won't start..cranks wants to put won't, I've put new fuel pump, new fuel filter , coils spark plugs, start motor, crank sensor.....still won't start ... A mate told me put oil on the bottom of the crack sensor ...after relazing you don't I took it out cleaned it.
David balfour you get it fixed ?
Thanks for your reply I ended up working it out it was the timming chain had stretched
Hi my commodore vz , cylinder #2 misfire, I switch changed plug and coil pack with cylinder # 4 , to make sure . But when restart the engine found again #2 still misfire instead of # 4, what can be problem?
hi! It sounds like the issue is with cylinder 2 itself, might be worth checking for poor compression. Have you also checked the spark plugs?
hi! It sounds like the issue is with cylinder 2 itself, might be worth checking for poor compression. Have you also checked the spark plugs?
Yes I checked the spark plug, plug look like wet and bit yellow insulator, rest of plugs have white insulator.
Could be a faulty injector?
@@3arl362 I think my problem is faulty injector. I have replaced coil packs and plugs to no avail.
Hey my power train warning come up arfter it over heated what could it be
+Brad Mobbs well a powertrain error is usually down to coil packs failing. Might be worth disconnecting your battery for about 20 mins then start the car again. May just need the computer in the car to reset.
Panda Garage i changed my spark plugs and now its fine you helped out alot thank you
+Brad Mobbs glad it all worked out!
Hey I’m the same guy and it come back up 😥😥
replaced my battery,spark plug and coil pack power train did come on
My vz came up with a powertrain fault and it was overheating and it went to limp mode.
Possibly thermostat? might have caused the car to go into protection mode
@@PandaGarage I think you're right, I've put a new thermostat on my ford focus then it drove for 30 min the went limp
Yea bro... thanks for that.... as it turns out twas my battery.
How much did they charge u to replace it?
I have a vz aloytec holden commodore 2004 and under load when you speed up it judders and revs dont climb unless you plant the foot
hi mark, by the sounds of it you could have a spark issue or that your fuel filter could need replacing. worst case might be that the fuel pump is on the way out. Have a look and let me know!
I replaced all coil packs and spark plugs still playing up
Crank angle sensor
i brought a second hand 2004 vz sv6, it has power train error come up took to the machanic he said it was timing chain, had that replaced $2500 later and the powertrain error did not go away, he said the code is now reading cam correlation and its running rough which it wasnt before he did the timing chain, it sat at his shed for 6 weeks and he doesnt know whats wrong with it so i have brought it home, should i try the coil pack or do you think its bigger than this, im over machanics and going to try fix the issue myself
well worth having a go if you are confident enough in doing it!
That mechanic rorted tf out of you man timing chain's shouldn't cost you more then 1500 mostly about the 1300 mark.
Hey mate, my vz lumina wagon is having an issue where it doesn't crank and doesn't start, generally you just here a loud clicking sound. It will eventually tick over after a number of attempts and turning the key to a certain position and it does on occasion tick over on the first try but more often than not it will take more than 3 attempts.
Do you think this is a starter motor issue or is it the motor itself?
I also have the powertrain error message, we replaced the o2 sensor but that only stopped it for about a day, do you reckon it is as you described in your video and is merely the coil packs?
Cheers.
Hey Luke, this could be your coil packs. Alloytec v6 coil packs were prone to failing early so this could be the issue. Also check the battery in your key, sometimes that could be the issue too. Does your car have an old or new battery?
Are you sure your main car battery isn't stuffed or not fully charged ?
A bad or flat battery usually presents itself by not turning over the motor - or only very slowly, whilst making the 'starter relay' simply continuously clicking as you hold the key in the start position.
Another possibility is a bad earth terminal connection. Either rusted or frayed.
Worth checking for sure
We ended up changing out the starter motor, seems to have fixed the issue for the moment. Will keep and eye on it, thanks for the feedback I appreciate it.
Power train fault help
Howd you go have you got it sorted
My powertrain error turned out to be my o2 sensors needing replacement
+Anthony Pisano oh! Didn’t think of the o2 sensors would have come up under powertrain error. Learn something new everyday!
yeah 02 sensors are defiantly one of the more common causes with this error
Opps engine running sweat
I changed coils no better
im having this issue with my vz when l get to 90 km power check engine train and engine light comes on and idles extremely rough
Yes same did u find the problem..
hi sabina, did you fix this problem, I got the same car with same problem when I get 90 km
Wvtte. Way to improve on speed ups like at 3:54 you should put in some music or commentary because no audio is boring. cool vid though hopefully there is less haters on this one.
+Fogarty Avenue yeah I didn't even think of that! Haven't put music on a video for a while so it didn't cross my mind! Thanks mate, I'm hoping too
Gooooood and your hoping to what?
+Fogarty Avenue sorry! Meant hoping that it won't get so much hate!
Goooooooooood!
9/10 time's usually the timing is out...
do yourself a favour & just don't get a VZ.
I hope that 1 chance out off 10 its not the timing for my sake.
Essentially, basically that was a informative video
audio is out of sync with the video
Don't know if anyones gonna answer this but I got a 2005 commy, clean as can be, brought it a couple days ago and it has afew issues. Firstly the battery was dead when I brought it(was jumpstarted to get home) it is absolutely clean, not a shitbox. it wasn't going into d, on the dash it says low gear when I'm in drive, same with all other gears. Secondly when I flat foot it (in d) the gears don't change it just acts funny. Thirdly as of 30 mins ago it came up with check powertrain. Could these problems be from the battery being dead? or is it another issue, it drives fine when I'm very gentle on throttle and it can move when I go 40-50% but 100% no go. Not a car head would really like a second opinion before I call a mechanic to come look. Thanks
1/2" or 12mm socket,come on now
12mm socket boss
Essentially , basically that was a waste of 5 minutes.
I’ve just wasted mine reading this
Really shit quality do not watch
Nice comment Colin, maybe make your own if you’re not happy