RWD V8 CHEVY IN A HONDA! THE ENGINE IS IN! HOT RAT ROD KUSTOM RWD CRX
Vložit
- čas přidán 19. 10. 2023
- #CASEYSCUSTOMS #HOTROD #RATROD #KUSTOM #v8HONDA #BUDGET
We finally get the v8 motor mounted in the crx and get started on the roll cage and floor!
⬇️NEW MERCH WEBSITE IS LIVE⬇️
caseyscustoms.com
HIT THAT SUBSCRIBE BUTTON!
I Finally got a P.0. Box! Send me mail, stickers, merch, anything! If enough shows up I will open it on camera! Thanks!!!
Caseyscustoms
P.O. Box 819
St.Joseph MO 64502
Stay tuned for more vids!
If you like this vid please like, share and subscribe!
It means a lot and helps the channel grow!
Also check me out on Facebook, Instagram and tiktok! 👇👇👇
/ caseyscustoms
caseys.cust...
vm.tiktok.com/VXsnAVsiE - Auta a dopravní prostředky
PLEASE LIKE THE VIDEO! ALSO TELL ME WHAT CAR YOU WANT TO SEE IN THE NEXT VIDEO!!!
The blazer
Blazer and why don’t you just recline the seat back a little bit
Blazer!
❤❤❤ BLAZER
Haven't seen the Blazer in a bit!
Casey! Make the body flip up on a hinge like a funny car! Then you can get to the engine super easy and it would be nuts at a car show with the body up 😂
I said that a few videos back!😂🤙🏼
Probably should just to make it easier to work on lol😂
100%
…just don’t forget to lat..I mean put the pins in!😆
Pleaseeeee
I had no idea Mitch McConnell was thinking about a mid-engine V-8 swapped 1990 Honda CRX. All this time I just thought he was having a stroke or seizure.
Nope gotta give him a break he was day dreaming about hot rods like the rest of us. 🥴🤣
2:50 “That’s a little too crazy for me…” Casey said, while looking at a slammed,V8, RWD, custom framed, CRX…
🤣🤣
If you ran tubular upper A arms that might give you more room to move the motor forward. Just a thought.
Like a mustang 2 with tubulars, hella more room. Those uppers are chunky af
I thought that you would have hinged the body so that you could lift the front up and access the engine. Top fuel dragster style
Love that motor placement, so much better than where it was!
Every day im at the edge of my seat just waiting for the next crx vid. This car is amazing to the max
Three things.
1. Dry sump oil pan. May get the motor lower and possibly allow you to run the cross member under it giving you some movement forward if needed.
2. Parimiter frame. Run the frame out to the side along the rocker. Lets the floor pan be on the floor with the frame giving you more headroom.
3. Seat track do nit need to be on the bottom of the seat. Mount them anywhere on the side at most any angle and bracket them so the seat is tight to the floor.
Or, separate seat bottom and velcro to the floor. Attach back to the roll bar with some sliding adjustability.
The amount of work you're putting into this car is crazy. Feels like you're reworking every inch of it twice! So fun to watch!
HELL YEA CASEY 💪 😎
Before you do the floor you should get driveshaft in and run exhaust. Be a lot easier welding exhaust wit no floor. Easier to run brake lines get it all done then do the floor.. just a thought.
This is really smart, specially cause he wants it on the ground, can tuck everything up then build the floor around that!
I 3rd this
What about factory injection off an old Camaro ❓ that would put the throttle body out front and allow you to snug it up as tight to the windshield as you want to . ✌🏼💚🙏🏼
Tune port injection. It’s an option
Damn, Richard... Mitch... I cried!!!
If you wanted to reinforce the crossmember a little better, get rid of the crankshaft pulley so you can reinforce that crossmember where it was and just buy an electric water pump. If you need an alternator they make alternators that you can actually attach to the rear differential that will rotate with the axle. That way the alternator is charging the battery while you're driving.
Let's goooo!! I'm working on my crx right now your the reason I started recording CZcams videos on it 🔥
Love you including the crypt keeper monster McConnell lol
I love this little car!! I have 3 English Ford Anglia project cars.
You are a real inspiration to me. Thanks.
Too add, man seeing your builds. Literally are inspiring for the fact that it's all diy.
This is the only guy that says he's going to build something I know he can and will he does some amazing stuff
It's going to look cool with the ground effects!
Again, this is why you build a complete frame. No screwing around. Build the frame to suit your needs.
Ground effects kit.. its bigger bumpers and side skirts so you can get a lower car or truck without lowering suspension
i think you should move the hinges for the hood to the front to make servicing easier. would let you get right up on the firewall
The absence of thrown hammers seems deliberate at this point....I've cried all my tears away
This little car makes us happy too Casey!
Silly Civ is coming along. Yep, coolest car you’ve done. Love Silly Civ.
Super cool man, lovin the build!
I like this build. Its is coming together now. It is so freaking cool.
I'm not jealous at all. Love watching all your builds and blows my mind how u managed to keep on budget with them 💪👍
You need a tubular front cross member to move it forward!!
I love this build more than any other!! So excited over it!!! You should do a RX7 next😳💪🏾
Richard...you are fired for the repeat frames in the first few minutes...don't even try to blame Casey for the late footage.
I thought that was me bumping my screen.
Oh shit give me time stamps I’m not seeing it
It's just redundancy, not a repeat clip, though it could of been edited out lol
2 minutes repeats twice
I thought it was me…on the toilet accidentally tapping the screen 😂
Do like Ian Roussel did with his radical rod, have the body from the firewall back lifting up funny car style and have a tilt front.
This thing is awesome the stance looks great!
This thing is a beast. I had a quick idea if you cut the front cross member out, move the motor forward, and use engine plates (can't think of the technical term) as a way to mount the motor and also as a cross member. Just a thought. By the way, coolest build on CZcams. Absolutely LOVE IT Crx's are bad ass.
you used the right term
Front suspension is in the way to go that route. If you moved the engine far enough forward for the plate the weight distribution is all outta whack. minimal room for cooling as well
Can't wait for the finished product!! Great build.
I’ve been waiting to see this vehicle since I was about ten in the 90s
Thanks for teaching me this kinda stuff wow.
love seing your love for a honda crx growing each episode 😜
Hi Casey try to source a Mugen Power pro 2 body kit for the cr-x. I believe wings west has some reproduction of that exact same body kit and it makes the car significantly look lower eventhough it really isn't.
This car should be fun to drive and it is already looking good.
You do some cool sh*t!!!!!!!!!!!! Love the CRX!!!!
If you put underdrive pulleys on it your crank pully will be smaller diameter.
Might be able to move it forward more
Can't wait to see it all done gonna look sick, mate 👌
Makes me happy too! Love it
Again love your the way your mind works.
Looking awesome Casey pretty cool man. 😎
Looks amazing Casey
Can’t wait to see how you cut up the frame and continue this build
Man, it's looking badass 🤘
Lovin it, its rad 😊👍
Instead of a rear mid engine sports car. It looks like it's gonna be a front-mid engine sports car, which is really good.....If I knew what I was doing and had some money. I'd like to move the engine a little more forward for easier service access. But still keep 3/4 the engine & it's weight behind the front wheel axle line & mount a manual gearbox in the back directly to rear differental. For great weight distribution, having more weight of the gearbox, rear diff & gas tank over rear wheels for more grip.....This CRX is gonna be awesome.
Kinda also really like the idea of a lightweight high revving, high HP, Honda k24 turbo engine up front with RWD and rear mounted manual gearbox. In a lighweight CRX.
Awesome!!
Soo cool!
Love you found the new Vega!
This build is coming along sick! Loving it! With all that room up front, you gonna throw on some turbos?
lol I can tell the editor had fun with this one
You must run premium gas. In case you don’t,Crappy new gas has a lower boiling point and causes vapor lock. So a phenolic spacer is needed. So don’t forget that in the equation. I feel like you know all this tho. Love this build. Please do donuts in it when you’re finished.
It’s not even done and I love this thing I fxxxing love it
Love it!
I can't wait to see this finished.
This thing is going to be so awesome
Look up Jeff Lutz jr. He has and Eg civic with a small block in it. Graf and drive car. It’s wicked cool
Great work love your work
Thank you very much !
You're insane literally I love it 😂
Maaann !! Cant wait till you finish !!!!
Why don't you weld like an upside down custom c notch. For where you're trying to accommodate for seats. Like weld it in then cut the frame. It'll keep everything squared. And then just cap where you cut the frame. Hope you get the idea.
Speechless 😮, new subs ❤
Another excellent episode….
The coolest build ever
Gotta take to car shows people will go crazy!!!!👍🏾
Get you a spool of flux core for when gas runs out
That is going to be so fun to drive
Casey this build is so bad ass. But for real make it so that it’s like the old school pro mods with the flip up body’s.
You’re a mad man. 👍🏽
So badass.
Really nice build bro 👌🏻 i really enjoy watching your video's ! I know my opinion doesn't really matter but the old wheels made it look more agressive✌🏻😁
Thought. I notice the nuts on top. If by chance, bolt and nut come loose, the gravity would cause the bolt to fall out. Put bolt in from top. So if the nut becomes loose, the bolt will not fall out. Just thought. Love your channel!
And here.....we.......go!
She's looking good!
Love it
I love it.
Sick ass crx!!!!!!!
Casey, it's so funny that when your working on the Honda, I always look over your shoulder to admire that SWEET '67 IMPALA, The Supernatural's "Baby". I can't keep my eyes 👀 off of it because it is so cool and mean, a perfect car!
Crx is looking good
a 4.3 v6 s10 has a throttle body intake that you can use and add a cone style filter where ever
Comment for Casey love the channel
too good would like to see finished bm mus 65, if only i could do this in australia.
Carona and I love this!
Im speechless too 😂
I was thinking you could do a hood scoop and do like your dad said and do a cut out. of the glass.
Why dont you run a LS with fuel injection? Would save space up top as no carb, valve covers are shorter, and run a car intake, and you can run a car oil pan and it wont hang way down
I don't know why but I love this car.
You can bring that motor forward a lot more find a different oil pan and move the steering down or to the rear you can do it
Bro. You are next levek. I do not watch channels like yours. But when I see you drop a video or a short I WATCH
Old turtle boy stroke n out 😂
Keep up doing awesome sh*t!
Looking good. I am making plans for my 96 accord
go a different route and add a v8 fwd system from an impala ss to the back,transaxle,engine and all......
@@trillrifaxegrindor4411 good idea... I am going to check into it. They have police cars with those specs?
Come on Richard been waiting all day.