🤔 What's so special about Nissan RB? | TECHNICALLY SPEAKING |
Vložit
- čas přidán 20. 02. 2019
- #haltech #engineteardown #rb26 #haltechTECH
In this episode of Technically Speaking we take a closer look at what is arguably Nissan's finest engine series - the mighty RB.
Their popularity has been on a continual upward spiral since the mid 1990s but the RBs are not without their flaws. That's why we've invited a special guest to our studio to cover the DOs and DON'Ts of an RB build.
Tell us what engine you would like us to do next!
------------------------------------------------------
Like this video? Here are some more like it:
What's so special about Barra? • 🤔 What's so special ab...
VTEC Yo! MCM Mini Explained - • 💬 VTEC Magic - Mighty ...
MCM Barra powered 9sec Cresta - • 💬 Mighty Car Mods Cres...
Nathan's twin turbo, big block Camaro - • Video
------------------------------------------------------
Like this video? Subscribe to our Channel.
------------------------------------------------------
For more Haltech goodness check out our:
Website: www.haltech.com
Facebook: / haltechenginemanagement
Instagram: / haltechecu
~-~~-~~~-~~-~
WATCH NEXT: "🏅 Jason Waye's Barra Powered Fox Body | HALTECH HEROES"
• 🏅 Jason Waye's Barra P...
~-~~-~~~-~~-~ - Auta a dopravní prostředky
In this episode of Technically Speaking we take a closer look at what is arguably Nissan's finest engine series - the mighty RB.
Their popularity has been on a continual upward spiral since the mid 1990s but the RBs are not without their flaws.
That's why we've invited a special guest Andrew Hawkins from Motive Video to our studio to cover the DOs and DON'Ts of an RB build.
Covered in this video:
• RB series history
• Engine Overview: czcams.com/video/TS3fFLg2QfU/video.html
• Tuning Options: czcams.com/video/TS3fFLg2QfU/video.html
• DOs and DON'Ts: czcams.com/video/TS3fFLg2QfU/video.html
Tell us what engine you would like us to do next in the comments section!
+
VQ next
Its gtr not gdr idiot
Hondas b18/16
Can you break down the 4g63 Evo 9 engineering please?
"R32 GD-R"
Its so cringe even for an aussie.
Gee
Dee
Arr
They can't help it. Bless their hearts.
I love it when Aussies talk about deck surfacing though. Hilarious!
@@EvilED08 Not as funny as when Kiwis talk about it
@@haltech shit I did it again - confusing two complete nations. Joke's on me. Haha
Anyways, nice video!
Haltec are killing it with content lately. Keep it up fellas
I like tuning fork. Great explainer, lots of knowledge, interesting to listen to. Thanks
Agreed, was going to post same thing - good presenter! Edit: 2:07 "Still powered by the RB26... (THWACK!!!)" great job man enjoyed hearing about this engine
The RB was such a wonderful engine. HKS actually developed a variable cam gear for the engine.
they developed it because its shit and cant spool turbos lmao
We really want to run Heltech for our R33 GTR Build!
Nice video but why does everyone who does a video on skylines forget that the R33 was the first mainstream production road car (Jaguar XJ220 aside) to do the Nurburgring in less than 8 mins. 7.59 by Dirk Schoysman.
Many RB's lives were saved just by watching this video. The Aussie car content is awesome these days Motive TV, Street machine and haltech heroes are really doing an awesome job keep it up.
Here I'll just do everyone a favour and translate. ''GDR'' = ''GT-R''
Jesus Christ man it's a Gtr not a Gdr, I wanted to punch him 👿👿👿
@@xtremehentai9311 it's not American to punch people, why not shoot up his school? Don't forget to blame Marilyn
@@Jason-im3pz you foreigners get "cute" confused with "offensive" quite often.
@@ConcussedGaming want to run that by me again Brian with a Y
American Patriot haha now let’s hear a yank say aluminium cringe
The r33 is my dream car and working hard for it
Said nobody ever..
@@snowjohn1298 it still has a rb26 and got Nissan to lemans so people have a reason to want it
@@snowjohn1298 still take it over an r35 but yeah
RawCkeT god I’d take any car over an r35 they disgusted the Nissan lineage with that, I still respect it but like, man they went in such an opposite direction
@@EuroSpec39 I mean the community around it is terrible but the car its self isn't that bad
Loving the content ❤
Loving you emeliahartford
what is this a dream🤨
Did you make this comment before you channel boomed? That's pretty cool
Need a Technically speaking for the mighty SR20DET :D
In the pipeline:)
Ew
AKA the worst sounding 4-pot ever. It’s a great engine though
Need a mighty SR20DET to start with :P
Think he meant FJ20
Aussie car channels are killing it lately with the awesome content thanks dudes. Me thinks the knowledge you guys bring forth helps save the lives of many an RB.
A video by the person who introduced me to Haltec! All bow to the great Tuning Fork!
Seriously feel smarter after watching this. Thanks for the in-depth dive into a lot of the "myths" surrounding these motors.
Love the passion you guys have for Japanese engines! All the best to both you and Andrew!
Thank you for mentioning the Australia Touring Car Series, most other videos I've watched on CZcams don't mention the ATCC when talking about the R32 "Godzilla" GTR. More than the Japanese series it was in the Australian series and it's domination against the best from Australia and Europe where the GTR really made it's mark internationally, and eventually lead to the demise of Group A Touring Cars. And of course, it received it's name "Godzilla" from Down Under as well.
People do forget when they are building RB's, to put a integrated main-cap brace into it to avoid the block cracking, and they just crank up more power and end up dumbfounded when it inevitably cracks from load.
Anyone got a price on the cradle showcased?
Joe Isabella Wrong
Very informative. Thanks for taking the time to put this together. Cheers
I learned a good bit watching this video and enjoyed it very much. Thank you for taking the time to share it!👍🏼👍🏼
Great video and info. This convinced me to build a 1JZ instead of an RB26.
Well, Nissan succeeded. That is all. And the car and it's engine became the word of mouth of everyone. A true legend(don't hate on me you 2JZ guys...)
nahh..used to be 2jz lover but then my heart fell towards rb26..sorry 2jz...2jz is great but the kind of energy and promptness rb has, 2jz lacks there!!
Great video, super informative. More RB / GTR content please! Looking forward to the Crank & Cam triggers video and how it works with Haltech.
Hey brokosky, huge fan of you and the mates from MCM.. Love how you always, and maybe not even realizing it, have the ability too dumb down the information for simple folks to understand. You're very easy to listen to, and I hope your channel the best of success. It's great having all this knowledge at my finger tips at anytime.
9:10 maP sensor had me laughing pretty good. Love the video. Would watch more on more engines.
Hahah same maP*
I don't see whats funny about the maP sensor.
😂😂😂😂😂😂😂😂😂😂😂
Keep clicking the time stamp gets funnier more more you click haha
I used to drive the pennzoil gtr!
In gran turismo 3
Nice Scotty. Nice to see Andrew dropping that knowledge on us too.
Man I respect this guys knowledge on RBs.
CA18!!! I know you had one back in the day mate ;)
CA18DET?? Dont you mean Rb20DET with two cylinders shaved off?.
Nissan should have made more CA18s and kept producing FJ20s instead of SR20det
oh i said it.
Sr20: give me all your money
"Pulls out knife"
FJ20: thats not a knife.
"Pulls samurai sword from sheath"
FJ20: Now this is a Real knife.
@@Suprastar77 Nissan had to ditch the CA18 to make a more cost efficient and less pollutant engine. Otherwise they probably would have kept making them up until the mid 2000's
I do own one😂
@@jacobwebb8818 we know why, could say the same about the z car going from inline to v; and hence ruining the company
always enjoying your videos tuning fork. Cant wait for the next lesson on engines from you guys. If you would do the nissan vq series that would be amazing.
I’ve got a RB30E in my GQ Patrol, what a wonder combination 🙌🏻
Thanks, Scot!
Great video.. love the RB series engine ❤
Had a VL RB30, and common fault of warped exhaust manifolds and cracked heads got me as well.
Very cool! Thank you guys for sharing. While I might not have the opportunity to work on an RB26DETT any time soon, you did touch on a few things of general knowledge. Some of which I could not believe had not already crossed my mind. 🤦♂️lol
Awesome info T.fork keep it up,RB-all the way!!!!! HALTECHWORLD
A few similarities with the Ford Cleveland V8s issues. Core shift, split bores, pumping too much oil up top etc, an a lot of the same remedies. Really interesting
Awesome! What a great video of explaining RB engine for who planning to build one. Can you do same kind of video for Totoya JZ and Subaru EJ?
In the pipeline:)
First video..just subscribed. you are well spoken..good pace etc. I especially loved how you made your "P" pop in MAP (9:10)
Love this! Thanks for posting - you've got another subscriber. Hoping to see more on the RB26 as promised and need to find this other gent's material. Being expert on this fine engine is critical for those of of getting into these cars for the first time here in America. In fact, I'm looking at an R33 (legal in US as of January 2020) that a company here is importing from your land down under. Boy-oh-boy is it pricey tho!
Great vid my guy! Just subscribed. Btw, what’s the name of the intro song?
What a fantastic video.
0:23 Arby’s story really started to gain momentum with their iconic roast-beef sandwich. Yum
Awesome video! Keep up the great work!
9:10 Map **POP** sensor
Shmoke
10:55
Nothing better than going to bed with Tuning Fork on a Friday night.
OK thats a bit weird, love you tho Haltech no homo
We love you too. In a buddy-like, non sexual way.
Rumple I did the same thing lol 👍
1 year later and it Friday for me lol what a coincidence :)
Love u Haltech
Really interesting video! Would love to see more of these!
Nice and interesting video nice to learn about the rb engine very well made just shows the old design engine are still advanced technology and quite reliable
Well done for a lovely video
Tbanks and thanks CZcams
Weird timing. I'm literally going this afternoon to have an Elite 2000 and some goodies installed in my R32 GTR. Cant wait to drive it after!
how's she holdin up?
My dream car is the 400R
I want it so bad
R33 gang
Very good information, great discussion, thank you.
Great info. Guys! These vids. Are Great for us Car guys😁
yall should do a video on the underdog of an engine, The vg30dett
kyle kirpaul good engine that can make good power on stock block and internals but it’s just way to damn complicated and they have lots of problems
kyle kirpaul agreed 😎
VG? you mean VQ?
@@campkira The VG was in the 300zx
Or better yet the VG30ET
Scotty please cover the 2JZ-GTE, great info keep the videos coming
Gay ass engine in a gay ass car
@@dustinchen go fuck yourself, you homophobic piece of shit.
Love the videos guys keep them coming.
So helpful going forward with my future build 👌
My cars been on 750whp for 1 year and 500hp for 2 years before that still going strong stock bottem end
A heathly engine oil supporting mods and a good tune does go a long way
GTR LIFE
RB31/26?
how much fuel you used up?
When tuning fork speaks. I listen. He's super smaht
I have a 2JZ and a RB26. Both fully built one with a sequential and the other T56.
Of course you do. Which one of them will you be spraying?
This was extraordniary. Thanks.
Because it came from the most successful sportscar bloodline in Japanese motorsports history.
Awesome episode tunning fork, please do one on 1j, 2j and 1.5j.
Please excuse my ignorance but what the hell is a 1.5j?
@@brandonb8543 2JZGE bottom end with a 1JZGTE head
@@brandonb8543 its not an official engine factory buily. But some people use a 1j head and put it on a 2j bottom end
Oh nice thanks everyone!! That makes sense then was thinking it was some combination of both... I'm in the states and where I'm at in the states the RB is almost non existent. It's a shame too I've always wanted to play with a fuel injected inline 6.
@@brandonb8543 plenty of rb cars down in FL where I live along with my own rb powered car. Give it some time cuz we're getting more skylines here as time goes on so you'll start to see more rbs floating around in the future.
Wow, show's you how much i knew about rb motors. Itb, No wonder they have such a nice note!
Just discovered this channel, today IS a good day :D
You can also upgrade to R8 aka VAG coils, much cheaper for the same performance and available worldwide unlike R35 ones.
The supra looks more like a boat than compared to the R33. Still a badass car though.
+Ray The R33 looks like a Maxima next to the Supra. Supra for life!
@@radio9730. R33 looks like an R33
@@d3tach3d Supra looks like a Supra
@@iWerli Huh?
The R33 is the real boat. Check the curb weight of that pig then check the weight of the Supra
Rotary breakdown would be awesome, love these videos. I've learnt a lot👌
I just bought a gtst with the rb20 and I have to say all of the rb motors are absolutely fantastic
Is there any other past models use this engine in the UK thanks
4g63 please!
Do an episode on the SR20DET please!!
It's on our "to do" list:)
@@haltech Legends :)
It will blow up just sitting there
@@shahrozalijafri8816 lmao
And the slightly overrated 4A-GE and the winning 3S!
Love it keep up the great work total pro respect scott
Great video Scott . Thanks
“GD-Ahh”
What's so special about RB you ask? When u put the & symbol between them, they make good soul rocking, love making music 😁
cool series, keep it up!
Tuning Fork should have his own TV show he explains things so well
Built by Japanese engineering gods!
not really some still broken... after all it was just to made around 280hp on first place....
500kw on stock bottom end.......lol, my block was worn out with 380kw in no time, circuit work will do that.
The crank flexes and wears bearing and ultimately the block.
RB engine harmonics are also a serious issue, this is why oil pumps break and crank noses break, it isn't just RB's, all inline 6's suffer from poor secondary vibration issues.
This point is hardly ever mentioned with inline 6's and is one of its biggest problems and understand this is important and how it can wreak havoc if not mitigated and checked. My RB 28 broke after a few years of racing time attack too, the crank nose broke, this was on a full HKS built engine with nearly everything done to it for reliability, the secondary imbalances catch up with you in the end.
Saying that drag cars will crack the block before a track car is laughable, the loads on a circuit are continuous for up to 20 minutes at a time and are experiencing harmonic imbalances for long periods of time.
For me the RB is not really an engine I like that much anymore, they are very heavy, too long for packaging in a lot of cars, and In fact inline 6's are not really a good engine for circuit work or making a circuit car fast all together.
The RB was a good engine overall, it achieved great things, but race cars have evolved significantly since the Bathurst. Drag racing is one thing, but the balance of a circuit car is a whole different ball game.
One of the biggest issues when approaching 400kw and over is the use of twin turbos.
I ran 500kwatw with GTX2863's, they were fantastic for response, annihilated any single turbo, even the EFR Borg series, but it came at a high cost, engine heat.
It isn't from radiant heat issues as much as it is form having small rear housings so the exhaust can't get out as well, and the increase boost levels to compensate for reduced LPM flow rates of twin turbos.
I was running 33psi and the reason why you can use a single turbo at 22-24 psi and achieve the same power level is because the turbo has a higher capacity (LPM), and when the inlet valve opens, it does not have such a drastic pressure drop as the piston draws downward (It hurts even more when using higher overlap cams), sadly overcompensating for lower flow rates, means increasing turbo pressure and thus inducing a lot of extra heat from increased pressures, this is by far the most important reason for changing to a single turbo over anything else.
If doing circuit work I can't stress enough for the use of an engine oil coolers and competition radiators and the best inter-cooler you can find, at-least for twin turbos RB's, but the selection of a good single turbo like an EFR8374 or 9180 would be one of the first things to consider if looking at keeping it nice and cool for a circuit car.
A steel crank, or crank girdle is a must upgrade for pushing a track car to these levels for long term reliability. The blocks crack because of weak cranks first, then harmonics second, crank girdles are great keeping stock cranks straight, but realistically a billet crank is the answer (maybe a girdle as well if you want bullet proof). Secondary harmonics ? Well that is a very hard thing to chase and cure and unless you have access to lots of vibrational analysis gear, it is a little bit of calculated guess work. Fluid viscous dampers can def help over vulcanized rubber variants and looking at lightened flywheels and clutch assemblies also helps a lot too, that is about all we can do.
So you are saying it would be well worth the $2500 to install an Integrated Main Cap Brace like the one presented near the end of this video? Most of the issues you mentioned would be eliminated with a brace, since it eliminates the twisting that cause most of the failures you mentioned, or am I wrong in my thinking?
that's Andrew for ya
@@JJ_ExMachina no you are definitely right about the brace from my experience, but if you had the billet crank and brace it would be very strong indeed for many years.
IMO, crank brace girdles are very underrated, they are integral at keeping long engines very rigid and do improve engine rigidity quite well from what I have seen.
@@SimonWorlds ... Thank you very much for the insight... I really appreciate it when people take the time to offer their experiences and knowledge.
Question, in terms of engine heat using water injection or water meth injection , would it not help the heat situation by cooling intake temps drastically ?
Just to get an RB here in the States, it has to be imported from Japan, and it's pretty pricey. That bottom end brace is very much the future of high performance engine block building. Love the series and history.
I could listen to scotty talk all day, it’s therapeutic
Oklahoma license plate!
Everytime he says RB's, I want to eat a shaved beef and cheese sauce sandwich on an onion bun.
Cheers Scotty 👍🏼
I and the r32 have the same birth year and month, no wonder its my favorite of all gtr's
YOU : RB
CZcams : *BARBIE*
I love the GD-Ahh engine
The Holden VL calis turbo was such an amazing car. It looked good & was fast. It was so damn good , the Australian engineers had to lower the engine below the radiator to ensure it would over heat & warp the alloy head to ensure it needed repairs to continue Holden's reputation of making junk as part of there company policy , in which to this day was responsible for customers leaving the brand to find better products.
Had an RB25DET, soo much fun, took skill to drive as turbo lag, but when it hits.....yeww
If Nissan would keep using this engine to replace all the lame boring fuel saving 4 cylinder engines, I'd want their cars for more than just its GTR cars
those are not cheap to made....company need money... that RB is getting outdated... it just good for power.. try to drive it fast and the fuel gone like no tomorrow...
campkira are u dyslexic
@@campkira Got to pay for their swindeling CEO's fines and legal bills somehow!
I was going to say something "clever " about the gdr, but thats already been played out.
Nooo... c'mon, there should be more GDR cleverness out there, surely?
Great video!
My dream engine...skyline rb26det...supra 2jz gte...evo 4g63t(mivec)
Your name is TUNING FORK! not Scott! Great video
Oh, sorry, my mistake.
Any one put RB26 head on RB25det block? I prefer the smaller stroke to bore ratio. A custom Billet RB32-34det that has same stroke/bore ratio of RB25, or even RB20 would be NUTS! Ever heard an RB25det with top shelf dump pipe and top spec, professionally configured full exhaust system?
Beats the shit outta 99% of RB26’s
I say we start a company that manufactures the turbo barra engine and exports them to foreign markets for reasonable price. Be hard to meet demand....
Imagine aftermarket sector for that engine if USA got their hands on it. They would be in EVERYTHING from skylines to 4WD’s to drift cars to boats even. Conversion kits and parts would be cheap as dirt. Who’s in? Lol
nice one scotty, im an RB guy but about to go SR, i know it hurts... all the way from Tochigi where the RB was made, i think about 20 minutes away from where i am lol, back then it was reference as the Million Dollar Man beating up the Ozzy Joe Blow, special shout out to MOTIVE VIDEO YT channel for all and everything you need to know about the RB and on that note SAMMIT YT RB guy living in Japan that drifted and filmed with Adam LZ and the DK of S15
I'm all about the rbs on my channel aswell 🤗
Love this video collab with Motive DVD.
Keep up the good work.
I would love to build a RB30 block with RB26DETT head and build a over 1xxx bhp time atrack GTR R34.
$$$$$$$ oh and $$$$$$$$$
R32 actually had around 300+ hp out the factory. They just couldn't reveal actual hp because of the gentleman's agreement in Japan amongst car manufacturers.
Problem with the oil pump gears is the stupid drive nissan used because it is cheap to machine. It makes the gear thin in 2 spots and when a crack forms there say bye bye to your engine. 2JZ has a proper spline on the oil pump drive..You don't know how many people want to punch that person responsible for this stupid decision. Same thing on the CA18 and SR20 oil pump..
St0RM33 You must be some sort of genius bro.
True. Add the block cracking because of the AWD setup on higher HP and that makes it worse
I really like how you explain few weaknesses of the block. Single turbo vs double. Can you talk about the 4g63 next technically?
Great work scotty