Finally someone who doesn’t spend $20,000 on a trailer! You are the most realistic person on CZcams that I’ve seen , every other person that owns their own company goes in the debt 20 to 30 K.
Very clean simple one of the best i seen so far thanks for sharing .If you cant build your own when starting then you dont belong in this business. Buy new built after you build your business
When you started showing the softwash tank, my 1st thought was, "softwash tank? I don't see no set up for that!" But then you went and showed the baby pump and the rest of the setup, I sat my ass done and hushed up. 😂😂
Im doing the same but im buying an enclosed trailer so that it can stay locked and safe from any rain or snow. Enclosed ones will also help a little with the noise probably
Good info man. Just bought the same pressure washer and starting up for the first time here in about a week when everything gets in. I ended up spending a bit more and hope its enough. Pressure Washers Direct def took the time to help me and answer any questions I had without aggravation. Can't say enough good things about em. Good luck and keep the helpful videos coming.
Guys you city guys have got to get it together on trailer weight distribution. I’ve seen 4 people wreck right in front of my farm because they load skid loaders tractors etc on the axle. You gotta get that weight up on the tongue so your truck is is soaking up half the weight. You go down the road especially on rain soaked roads that weight back there literally lifts your truck axle up off the ground and you will lose control. Trust me on this. Not jumping your ass. Just don’t wanna see you get yourself in a wreck. Water weighs 8.33 pounds a gallon. That’s 2290 lbs you have waaaay back on that axle with damn near none of it on the tongue and truck. Put the tank up front and the washer and smaller tank towards the trailer axle and you will be much safer going down the road.
Nice of you to post this very informative video. Will it be too much to ask you to include the parts list for the novices like me who are motivated to follow in your footsteps?
Really enjoyed your video!!! I've been doing some pressure washing and a little bit of soft washing in the past few months. I like everything you've done to your trailer and will probably copy your rig in the next month or so. Already have a 4000 psi 4.0 gpm Honda powered pressure washer and a smaller unit that I started with. My plan is to mount the power washer on the trialer without the wheels so that it's permanently mounted and use the smaller unit as a roll around unit. I've acuumulated a lot of the stuff I need over the past two or three months, just haven't decided on a trailer yet. I keep looking on Craig's List and I'm sure one will pop up at some point that I can mount everything in and have a dedicated power wash trailer.
Everything you said here is true, it's cheaper to do a setup yourself, it's real cheaper. Even for a truck bed skid. Just get a powerful enough engine and a powerful pump, hook them up together. Plum them, your done. You can save hundreds to thousands. That's what I'm doing right now, but on the 1st buy, I bought the wrong engine, I can't use a Vertical Shaft😞 So now I have to get rid of this one and buy the right one. I did my research but never looked on that topic. Trial and error.
I got lucky and picked up a 275 water tank for free, saw a yard with tons of them went to purchase one and they said they had no need for it and were trying to clean up,they loaded it up in my truck now that's 1 less thing I have to purchase I'm in the process of rigging up my trailer
Kenny great video learn a lot about plumbing a trailer. just getting started in the pressure washing business I don't have a trailer yet but working on it the hose that feed your chemical will the pressure drop on the reel hose when the chemical is returning back into the chemical tank is it open when you are using the system to soft wash
Best video out of all of them. As I’m trying to put one together. Tons of trial and error. You had ,Mentioned no air bubbles. As my plumbing can use critiquing and advice I will do a video soon if you get a chance I would love your feedback thanks
Awesome set up. Is there any way you can message me all the materials needed for this setup? I want to build my own. A drawing or map would be killer! I’d pay for just the blue prints!
I've watched several videos and your's was well planned and thoughtfully executed with precision. Have you seriously considered assembling the equipment and plumbing components for clients? Say, for example, somebody provided everything and paid you generously for your time & labor?
Agreed on buy the top of the line. It may sting a bit and increase your risk starting out, but if failure isnt an option for you, then get the best eq and tooling possible. Youll be faster, produce better results and impress your customers. Nobody wants to see a pro pulling up with the same setup you can buy at Walnart for $199,
Thank you for this video. That helps a lot person like me . I’m just set up my trailer and I’m doing everything by videos like your. I really appreciate if you can recommend what water filter use to my 8 gpm machine and my buffer tank feeding? Thank you
Clean setup do you help ppl build there setup my friend I recently bought my trailer n pressure washer equipment but I’m having trouble setting everything up
Dillon question. Does he have the orange real and orange hose for soft washing roofs ? is that the setup you would need to clean roofs ? I'm trying to get this all figured out
Great video. As to the unloader valve on your pressure washer. I understand that the 3/8th blk. line just comes out of the washer and loopes right back into the flo valve. If you run another 3/8th line from the top back to your tank. What do you do with the short 3/8th line that goes back into the pressure washer and now it is only connected at the bottom? Do you have to run another line from the tank to it, to finish the connection. My son want to get started in the business and I want to help him with the building of the trailer, but I'm a little confused on this part. Thanks for any help that I can get.
Your brass gun on your soft wash reel, it has a cone jet type tip? What range are you getting out of that when on jet? . I like that you can dial it down to a mist it's also nice to be able to put it more on the stream and shoot it longer range
So do you have any trouble with the chemical tank leaking at the bottom plumbing connection? Just curious. I want to get a bigger bleach tank but thought having one with no plumb hole in the bottom would be better for leaks. Let me know man. Thanks. Yours looks great.
Finally someone who doesn’t spend $20,000 on a trailer! You are the most realistic person on CZcams that I’ve seen , every other person that owns their own company goes in the debt 20 to 30 K.
That's one of the cleanest setups I've seen yet. great job man!! I just set mine up yesterday almost identical to yours. works awesome.
Beautifully engineered, clean set up man. Looks perfect. Congratulations!
you made this setup look very very simple - we would love to see the trailer in action especially the softwashing
Very clean simple one of the best i seen so far thanks for sharing .If you cant build your own when starting then you dont belong in this business. Buy new built after you build your business
When you started showing the softwash tank, my 1st thought was, "softwash tank? I don't see no set up for that!"
But then you went and showed the baby pump and the rest of the setup, I sat my ass done and hushed up.
😂😂
Awesome. I'm just about to build. But I'll put it all on a skid or make a power cube. I need my trailer for my property maintenance equipment as well
I.like your set up its easy then other setups I seen
i really like your set up. Thank you for the video. This has been the easiest video to follow along with
My Guy this is definitely the best video I seen! Thank you!!!
Beautiful my friend. Simple and elegant.
Great video. Good practical advice. Good explanation and overview of your setup, especially how you have it plumbed.
Im doing the same but im buying an enclosed trailer so that it can stay locked and safe from any rain or snow. Enclosed ones will also help a little with the noise probably
Brilliant mate, thanks a lot...
Nice job man ! Perfect
good set up
I really like your set up. Simple but effective. Thanks
dope plumb job bro 💪🏾
Very nice video love the set up
Very nice clean setup!
nice setup been debating on building my on pressure washing trailer just got in to pressure washing we all so do mobile media blasting
Good info man. Just bought the same pressure washer and starting up for the first time here in about a week when everything gets in. I ended up spending a bit more and hope its enough. Pressure Washers Direct def took the time to help me and answer any questions I had without aggravation. Can't say enough good things about em. Good luck and keep the helpful videos coming.
Guys you city guys have got to get it together on trailer weight distribution. I’ve seen 4 people wreck right in front of my farm because they load skid loaders tractors etc on the axle. You gotta get that weight up on the tongue so your truck is is soaking up half the weight. You go down the road especially on rain soaked roads that weight back there literally lifts your truck axle up off the ground and you will lose control. Trust me on this. Not jumping your ass. Just don’t wanna see you get yourself in a wreck. Water weighs 8.33 pounds a gallon. That’s 2290 lbs you have waaaay back on that axle with damn near none of it on the tongue and truck. Put the tank up front and the washer and smaller tank towards the trailer axle and you will be much safer going down the road.
Very clean and organized!!! 👍🏻
Nice job man
Nice of you to post this very informative video. Will it be too much to ask you to include the parts list for the novices like me who are motivated to follow in your footsteps?
Really enjoyed your video!!! I've been doing some pressure washing and a little bit of soft washing in the past few months. I like everything you've done to your trailer and will probably copy your rig in the next month or so. Already have a 4000 psi 4.0 gpm Honda powered pressure washer and a smaller unit that I started with. My plan is to mount the power washer on the trialer without the wheels so that it's permanently mounted and use the smaller unit as a roll around unit. I've acuumulated a lot of the stuff I need over the past two or three months, just haven't decided on a trailer yet. I keep looking on Craig's List and I'm sure one will pop up at some point that I can mount everything in and have a dedicated power wash trailer.
GO FOR IT! THAT EASY SOLVED MY CONCERNS
Nice setup. It might be a simple setup to you but way above my IT head.
Thanks for the encouragement. You rock!!!!!!
Everything you said here is true, it's cheaper to do a setup yourself, it's real cheaper.
Even for a truck bed skid.
Just get a powerful enough engine and a powerful pump, hook them up together. Plum them, your done.
You can save hundreds to thousands.
That's what I'm doing right now, but on the 1st buy, I bought the wrong engine, I can't use a Vertical Shaft😞
So now I have to get rid of this one and buy the right one.
I did my research but never looked on that topic.
Trial and error.
I got lucky and picked up a 275 water tank for free, saw a yard with tons of them went to purchase one and they said they had no need for it and were trying to clean up,they loaded it up in my truck now that's 1 less thing I have to purchase I'm in the process of rigging up my trailer
Amazing set up
Very nice job. Looks excellent.
Looks like he ain't takin any questions
We’ll done man ! You got a money make my
A guy i know got what i'm guessing is the exact same trailer at Runnings, free financing for a year, maybe two? for $1700 total. really good deal
Thanks ... this is very helpful ..
Great setup! Thank you very much for the detailed walk-through. I've subbed your channel. Thanks! Cheers - Luther
Kenny great video learn a lot about plumbing a trailer. just getting started in the pressure washing business I don't have a trailer yet but working on it the hose that feed your chemical will the pressure drop on the reel hose when the chemical is returning back into the chemical tank is it open when you are using the system to soft wash
Howdy. Just seeing this video. Awesome work. How did you secure the machine down.
man this is fantastic ...awesome man just freaking awesome
awsome job
Great video! 👍🏻👍🏻
nice set up
Best video out of all of them. As I’m trying to put one together. Tons of trial and error. You had ,Mentioned no air bubbles. As my plumbing can use critiquing and advice I will do a video soon if you get a chance I would love your feedback thanks
great setup!
You forgot the HEAT! Hot water is KING!
Awesome set up. Is there any way you can message me all the materials needed for this setup? I want to build my own. A drawing or map would be killer! I’d pay for just the blue prints!
Did you ever get one? I really could use some help😅
I've watched several videos and your's was well planned and thoughtfully executed with precision. Have you seriously considered assembling the equipment and plumbing components for clients?
Say, for example, somebody provided everything and paid you generously for your time & labor?
Mitch Meier I agree, this guy has an engineering mind and should do set up consulting.
Serious trailer set up and video, great job, i agree, you could be the man to build trailers
Now and days that pressure washer alone is close to 5000
Great video! Thanks for the info!
Great video, very helpful. Thanks for sharing.
Agreed on buy the top of the line. It may sting a bit and increase your risk starting out, but if failure isnt an option for you, then get the best eq and tooling possible. Youll be faster, produce better results and impress your customers. Nobody wants to see a pro pulling up with the same setup you can buy at Walnart for $199,
Very nice! How much do you think that thing weighs with a full buffer tank?
275 gallons at 8.34 pounds per gallon a full buffer tank will weigh roughly 2,293.5 pounds
Thank you for this video. That helps a lot person like me . I’m just set up my trailer and I’m doing everything by videos like your.
I really appreciate if you can recommend what water filter use to my 8 gpm machine and my buffer tank feeding?
Thank you
Nice job especially at plumbing
That’s a nice set up. Did you model it off of another setup or figure it all out on your own
Nice job!
Could you put a list of parts and equipment and were you got them from and do you need a water tank that big or could you go smaller
1 IBC tank how many trucks can wash?
With your 275 gal tote first part of the set up can i get the all specific and links to the parts to complete the set up
Very nice!
Do you use a pump to help your pressure washer receive water with the water tank or do you just use the pump for the soft wash side
Clean setup do you help ppl build there setup my friend I recently bought my trailer n pressure washer equipment but I’m having trouble setting everything up
i found a 450 ft GP reel 3/8 1/2 output powder coated for 200 dollars it is awesome!
That us bad ass , great job
Do you have a list of everything needed for all of the plumping for that set up? I'm going with that same type of layout. .
Why can't I ever get my hoses to look that neat on the real no Matthew hard I try my hose overlaps any advice boss?
Don’t know if you are still active but did you pressure treat your wood to avoid corrosion from the sh?
Keep it simple... I like it, well done sir
where you get your wather? thas a good set up.. good day.
Thanks for sharing the information.
Cool and very user friendly
excellent video, one question .. where do you take the water to fill your water tank?
Is your chemical hose just air hose? Could I use flexzilla air hose for softwashing?
What is the remote fuel tank for? To start the washer?
Thank you.
Thank you for this video!
Why do you have a big water tank? You don't use the customers water?
GREAT VIDEO!
I'm looking for info on what chemical mix you use for pressure washing and what mix you use for (soft) roof washing?
Great setup ! you batch mix for the soft wash. Do you downstream chems to the power washer out of the same tank ?
How do you turn on & off your soft wash pump when washing?
Nice setup I'm doing the same thing.
man that's a great job
How much was just the pressure washer?
You've got a badass power washer setup I wonder why you didn't just get a downstream injector for your washer. I'm sure you have a good reason
Dillon question. Does he have the orange real and orange hose for soft washing roofs ? is that the setup you would need to clean roofs ? I'm trying to get this all figured out
nice trailer
No hot water heater?
Ce careful pulling a trailer with more weight on the tail than on the tongue.
Can you put links in to where to buy all the components?
No more vids????
Thank you
Great video. As to the unloader valve on your pressure washer. I understand that the 3/8th blk. line just comes out of the washer and loopes right back into the flo valve. If you run another 3/8th line from the top back to your tank. What do you do with the short 3/8th line that goes back into the pressure washer and now it is only connected at the bottom? Do you have to run another line from the tank to it, to finish the connection. My son want to get started in the business and I want to help him with the building of the trailer, but I'm a little confused on this part. Thanks for any help that I can get.
Your brass gun on your soft wash reel, it has a cone jet type tip? What range are you getting out of that when on jet? . I like that you can dial it down to a mist it's also nice to be able to put it more on the stream and shoot it longer range
Your trailer looks great. You've had it for a while now.. did anything jump out since the side rails are low? Thanks for the video.
Nice setup bud 👍, question how you got that extra hole on top of the tank ?
So do you have any trouble with the chemical tank leaking at the bottom plumbing connection? Just curious. I want to get a bigger bleach tank but thought having one with no plumb hole in the bottom would be better for leaks. Let me know man.
Thanks. Yours looks great.
Your water tank sits on the death wobble line
Does the pump get power all the time? Or is it powered by the generator when you turn it on? What type of pump would you recommend to start with?