Audi Steering Wheel Airbag Trim Replacement! *Learn from my mistake! (B8)
Vložit
- čas přidán 5. 09. 2024
- Hello guys, here is another Audi video! Learn from my mistake about replacing my chrome trim and airbag cover. This video as the products used listed below:
Boobo AD-80CB Carbon Steering Wheel Insert Emblem Badge Cover Logo Sticker for Audi (80mmx78mm)
www.amazon.com...
Trapezoid Car Steering Wheel Sticker Aluminum Body Emblem Trim Fit for Audi A3/A4L/A6L S4/Q3/Q5 (Silver)
www.amazon.com...
Make sure to subscribe to the channel, 95.0% of my viewers are not subscribed yet!
(As of December 2020.)
More videos to come and I hope you have enjoyed what I have put out so far!
Make sure to follow!
Instagram: @jqonthego
Twitter: JQOnTheGo
Email: jqonthego@gmail.com
Song: Chris Lehman - Arrival (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Chris Lehman - Arrival...
Song: Fredji - Welcome Sunshine (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Fredji - Welcome Sunsh...
How did you switched the chrome trim? I want to switch mine and I don’t no how… please help 😉
I ended up using the 3M adhesive and the chrome trim piece that I got on Amazon. As you can see from my mistakes I wasn’t able to fully remove the stock chrome trim which was on the air back cover. I hope that the video was helpful!
It looks great!
Thank you very much!
I did this job in 1 hour. You have to be patient and careful. The hardest part is braking the tabs and what seems to be wax or epoxy drops holding the ring down. Once you do that its easy. Just remember in which position the air bag itself was removed.
Thank you for the details!
but how did you replace the silver ? there is not how you dit in the video
As I kind of showed in the beginning, I originally tried removing the silver trim with a heat gun and prying it off the wheel. This damage the airbag cover and I got the carbon fiber piece to cover up my mistake.
I would recommend trying to glue the new piece on top of the original trim. That is what I did!👍
Does this inhibit the function of the airbag? The normal action of the airbag is that it splits in the middle. So having the carbon sticker covering it would cause an issue if it was deployed or would it just blast it out the way?
To my understanding, the sticker would have come off in the result of an accident. On the back of the 3M carbon fiber, pens, there was a split line down the middle. I believe that lime was intended for to break into two pieces in case of an accident to allow for the airbag to come out cleanly.
I hope this was helpful!
Should have treated to yourself to one of our airbag covers! You have to remove the airbag and melt off the retaining clips from inside the cover to remove the trim btw
Maybe next time! Thank you for the tip!
No mate that’s not going on my Q5
Mines clip in how to I remove that?
Hmmm...I'm not positive, sadly!
Oh my god, why didnt you watch a tutorial how to remove it:)? You have to dissasemble the airbag and do it from the inner side...
You live and you learn! I wanted to post this video to help others and I appreciate you leaving this information in the comments!
@@jqonthego But you shouldnt have... You should post a tutorial if you know how to do something, otherwise its useless :) Because its a tutorial... And a tutorial should show you how to do something... And you dont know how to do it :)
Waste of time, you did nothing that you said.
Bro he changed the trim of the wheel…what did else did you expect from the video??
My apologies for the inconvenience, I tried to show and explain my thought process!
That was seriously a pointless tutorial
My apologies if the tutorial wasn’t helpful to you! I hope that you were able to learn from my mistakes and that the comment section is helpful! Best of luck working on your car.
lol looks worse and more tack than stock bro fail...
I tried my best! It could have been better, but that is why I posted the video - so you can learn from my mistakes!