Power Steering Installation went Wrong 💥on my 66 Mustang 🐎⛽🚗

📷 Follow Us On Instagram / dannypazos1
@DannysClassicGarage
⛽What's up guys !! sometimes we don't expect something wrong, but it happens😒, today I found a problem with my car and i couldn't' install my Power Steering Conversion properly.... is not the end of the world but does not feel good, we will need some parts from a donor car and we will cover that in another video📽️
Parts Used in this Video
1- 🚗 Borgeson Power Steering Conversion Kits 999023 (without Pump) - www.summitracing.com/parts/BR...
2- 🚗Borgeson Power Steering Conversion Kits 999020 (with Saginaw Pump) - www.summitracing.com/parts/br...
3- 🚗 Borgeson Power Steering Hose Adapters 925123 - www.summitracing.com/parts/BR...
⛽Thanks for watching, don't forget to like and subscribe to support the channel 👍

[@dejavukrewe]

Loving the series.

[@DannysClassicGarage]

😃😃😃👍🏻

[@codychenoweth1241]

My kit’s hoses were too short and hard tube was angled wrong. Had to get a longer hose made then worked well with the Saginaw.

[@DannysClassicGarage]

Yes, I had the exact same problem, I didn't order longer hoses, I just add a new hose section to the return hose and clamp it, I'll see how it works when the car runs but i think it will be ok

[@chrisdavis4545]

Good video, one safety thing i noticed on other videos is that they grind off the splines in the area for the rag joint set screws so it can't slip off.

[@DannysClassicGarage]

Hey chris! Thanks you so much for the advice, you are right, I'll do it 👍🏻