UJK drill guide and centring vice overview, hands on.
Vložit
- čas přidán 17. 02. 2023
- Hi guys, here is a deeper look at the drill guide and centring vice from UJK Axminster. When I was in the market to purchase a drill guide there was a lot of junk and I wanted to buy one I wouldn't regret but there wasn't much info out on the web in regards to reviews and more in depth looks. So by doing this video I hope it helps anyone considering this as one of their options when buying a drill guide. #bestdrillguide #woodworking #drillguide
![[Vowel]물고기는 물에서 살아야 해🐟🤣Fish have to live in the water #funny](http://i.ytimg.com/vi/3G9MH063Cx4/mqdefault.jpg)
Can the centring Guide be mounted to underneath the base plate so if I were to drill baluster holes in a handrail I could use it to drill centre and on the angle at the same time? Hope that makes sense.
Sorry for the late response, I finally managed to check it and it appears as if you can, the mounting holes go straight through the base and are accessible from the bottom of the unit so on first glance, yes, it does appear to be fixable from the bottom. As far as the bannisters, I’d imagine so but it’s a fairly heavy unit so YMMV 🤷🏻♂️ but thank you for that awesome question, it may of just opened up a whole lot of new options for me 🤔
Great video! Thanks for this! I was looking for more info on this jig! Keep it up!
Thank you 😊 Glad you found it helpful 🤟
Thanks for the review. Now I know which one I want to have.
No worries, glad you found it helpful 🙏
Fajny kubek ;)
On this side of the pond the same basic design is available from Rockler. I love it!
yes iv noticed this, I wanted the RAockler but got this instead as it was more readily available.
No thank you
Very nice video!!
Thank you 🙏
Great Vid. We'll done mate 👍
Thanks bud 🙏
Looks like a really nice piece of kit, but I can buy a pillar drill for the same price
Yeah definitely a premium priced tool, I have a drill press but wanted something more portable
Great review. I ended up with a cheap one from banggood and it’s let say okay. You have another subscription due to the quality of the review 😊👍
Kindly appreciated, every sub helps 🙏
I have the woodpeckers drill guide and it is awesome, probably more money than that one but its great quality.
Yeah the woodpeckers, to me at least, looks like the best drill guide currently available on the market but that’s reflected in the price. This is a very good second best I would say 🙏
Why didn’t you go for the woodpeckers?
Mainly price I think, worked out almost if not more then double the price of this. Would love to have had the opportunity but decided against it simply due to budget
Looks like a Rockler drill guide with a color swap. Is ujk just a reseller?
Yeah I noticed they pretty much are identical. I don't think they are resellers though, they are a UK fabricator but it could be possible? id have to look into where it was made tbh.
@@woodcraft_cz Could also be that Rockler is the reseller. Or that they both use the same factory in China - though if that were the case I would expect to see more knock-offs.
I dont have this specific model, but i found this kind of guide difficult to operate accurately. Holding it down with one hand, and having to lift the other arm quite high to push the drill down with sufficient power while keeping the motion vertical is challenging ergonomicly.
I always find that if extra pressure is needed on the drill, a clamp on the base works a treat 👌
@@woodcraft_cz I will give it a try. Thank you. Any tips for drilling in the middle of a board?
@@b3arwithm3 out of luck on that one I’m afraid 😁 I would consider a strong double sided tape if just the one hole but if repeat holes then that’s not a great solution
Richmond Felicity Avenal, Is That YOU??!!!
😅 I wish
Better without the music. Useful to see the vice application too. Cheers 👍🏻
Thanks Mike for the constructive feedback, as a new channel it’s all greatly appreciated as I continue to grow. I will be visiting the volume/inclusion of music as it’s been raised before. Glad you found parts useful 🙏
subbed for you to build this channel. 👉 1000
That's greatly appreciated, its a real struggle getting subscriber count up for sure
Angle detents would be better.
Totally agree with you on this, to have tactile stops on the angles would be perfect 👌
These drill guides are no good if you want perfectly straight drill bit holes the reason for thise is because some times we'll most of the time when you are pressing down on the drill one side depending on you arm location will push slightly down on one side than the other and then your drill bit drifts it's OK for straight down but if you are after accruacy your better using a 45 or 90 block to clamp down and drill into with the support of both hands on the drill
I hear that and agree to some extent but on the same note, I try and let the drill and bit along with gravity do the work and try my best to not forcefully push the drill, it’s mainly an issue when gravity isn’t on your side (awkward angles >45° etc). I guess it also depends on your required tolerances and application (marrying parts could be an issue but haven’t tried)