My First Major Mistake! 😳| Blake Builds Van Life Ep.4

SdĂ­let
VloĆŸit
  • čas pƙidĂĄn 5. 08. 2024
  • In this episode of the Blake Builds Van Life series, we install the wiring to be able to charge e-bikes, fit a boiler for hot water for the shower and unfortunately, Blake makes his first big mistake! All in an effort to build what Blake thinks is the ultimate mountain biker's van life conversion!
    In association with WORX Power Tools: gmbn.eu/Worx
    Subscribe to Global Mountain Bike Network: gmbn.eu/subscribe
    New 2022 Team Kit has arrived! 👉 gmbn.eu/New2022Jerseys
    Follow us on Instagram or Facebook! @globalmountainbikenetwork & sign up to the GMBN newsletter: gmbn.eu/newsletter
    Submit your content to our uploader: upload.gmbn.com/ we love to check out what you have been up to and may feature it on the show!
    What features would you have in your ultimate MTB van? Let us know 👇
    Watch more on GMBN...
    đŸ“č Blake Builds Van Life Pt 5 - gmbn.eu/BlakeBuildsVanLife5
    đŸ“č Blake Builds Van Life Pt 4 - gmbn.eu/BlakeBuildsVanLife4
    đŸ“č Blake Builds Van Life Pt 3 - gmbn.eu/BlakeBuildsVanLife3
    đŸ“č Blake Builds Van Life Pt 2 - gmbn.eu/BlakeBuildsVanLife2
    đŸ“č Blake Builds Van Life Pt 1 - gmbn.eu/BlakeBuildsVanLife1
    đŸ“č Watch our weekly show, The Dirt Shed Show - gmbn.eu/dirtshedplaylistt
    The information contained in this video is for entertainment purposes only. We can accept no liability for any injuries or damage sustained should you try to recreate anything shown in this video. If you are a minor and you do choose to do a project like this, always seek help from a parent or legal guardian. When using power tools of any kind, always exercise caution and use appropriate safety equipment.
    The work carried out in this video has been undertaken with and under direction of a professional welder to meet UK standards and regulations for carrying passengers (correct at the time of publishing). This video is for entertainment purposes only and should not be taken as an instructional guide. Please do not attempt to recreate anything shown in this video unless you are suitably qualified or you have obtained professional advice and/or assistance.
    đŸŽ” Music - licensed by Epidemic Sound
    Chase Hunter - Harry Edvino
    Stay for a Little While (K-POP Version) (Instrumental Version) - Collin Lim
    Love Bomb - Sarah, the Illstrumentalist
    Playtime - Margareta
    Veras Song - Victor Lundberg
    Breezing Through - Margareta
    I Gotta Hunch - El Flaco Collective
    Everything (Instrumental Version) - Tilden Parc.
    Earth (Light It Up) (Instrumental Version) - Xavy Rusan
    Hiccups (Instrumental Version) - Ooyy
    Blue Shoes - El Flaco Collective.wav ES_Hemisphere - Ooyy
    Sandstorm - Chris Shards
    #GMBN #MountainBiking #MountainBike #MTB #BikeLife #Cycling #GlobalMountainBikeNetwork #BlakeBuilds #Vanlife
    The Global Mountain Bike Network (GMBN) is the world’s largest and fastest-growing online mountain bike channel and community - and your destination for the best mountain bike content in the world.
    GMBN is dedicated to inspiring and unlocking your riding potential. Our videos cater to fans of every mountain bike discipline: from mile-munching cross-country (XC) riders, through adrenaline-fuelled dirt jumpers, gravity-hungry downhillers or aspiring enduro racers, and beyond.
    Every day of every month, our ex-pro presenting team are on hand to entertain and inspire you while also providing a uniquely qualified insight into the world of mountain biking. Every week we deliver original daily video that include:
    Adventurous and entertaining features
    Mountain bike skills coaching
    Technical advice and guidance
    Mechanical know-how to keep you rolling
    A place for the riding community with our weekly Dirt Shed Show
    Thanks to our sponsors:
    Canyon Bikes: gmbn.eu/Canyon
    Nukeproof Bikes: gmbn.eu/nukeproof
    Orbea Bikes: gmbn.eu/Orbea
    Park Tool: gmbn.eu/ParkTool
    POC helmets and eyewear: gmbn.eu/POCsports
    Crankbrothers Pedals: gmbn.eu/crankbros
    Shimano Footwear: gmbn.eu/ShimanoShoes
    Dainese Protection: gmbn.eu/Dainese
    Ergon: gmbn.eu/ergon
    Vittoria Tires: gmbn.eu/Vittoria
    FSA: gmbn.eu/fsa
    e*thirteen: gmbn.eu/EThirteen
    Spank: gmbn.eu/Spank
    Topeak: gmbn.eu/topeak
    Garmin: gmbn.eu/Garmin
    Muc-Off - gmbn.eu/Muc-Off
    Wahoo: gmbn.eu/WahooTraining
    Komoot: gmbn.eu/Komoot
    Worx Power Tools: gmbn.eu/Worx
    CamelBak: gmbn.eu/CamelBak
    CZcams Channel - gmbn.eu/GMBNsubs
    Instagram - gmbn.eu/GMBNIG
    Facebook - gmbn.eu/GMBNFB
    Twitter - gmbn.eu/GMBNTW
    GMBN Shop - gmbn.eu/gmbnshop
    GMBN Tech - gmbn.tech/subscribe
    EMBN - embn.me/subscribe
    Leave us a comment below!
  • Sport

Komentáƙe • 181

  • @gmbn
    @gmbn  Pƙed 2 lety +7

    What features would you have in your ultimate MTB van? Let us know 👇

    • @nacnud2323
      @nacnud2323 Pƙed 2 lety

      Diesel parking heater, a few kwh of batteries, 100 litre of water (min). Nice to have would be LPG gas install and a calorifier water heater hooked up to the engine coolant loop. After that it's all just layout and what you want to use the van for.

    • @sandywatson1082
      @sandywatson1082 Pƙed 2 lety

      whats happened to GMBN e-bike chargers in a van, you might as add a space for your Zimmer frame

    • @Ha-GNAR
      @Ha-GNAR Pƙed 2 lety +1

      disco ball and purple velvet interior

    • @tomb2289
      @tomb2289 Pƙed 2 lety

      Major security/insurance setup. If I planned and built my pride and joy like that and it got nicked I can't imagine 😭

    • @tbregovic
      @tbregovic Pƙed 2 lety +2

      Insulation

  • @paulcrtr
    @paulcrtr Pƙed 2 lety +50

    Loving the build but don't forget to use some sound deadening before you full enclose the rear part of the van. Cuts down on road noise a bit plus helps make the van feel less tinny when shutting the doors. Insulation stuffed in the cut outs in the rear of the van will help with the temperature plus noise reduction. Bit late to put it round the rear wheel arches.

    • @JayGee6996
      @JayGee6996 Pƙed 2 lety +2

      Insulation will be key if he’s taking the family, hopefully he doesn’t forget that bit

    • @gabrielgostelidelacruz6235
      @gabrielgostelidelacruz6235 Pƙed 2 lety +1

      About to come and comment the same thing

  • @kirawr8064
    @kirawr8064 Pƙed 2 lety +47

    the scenes with jen and the kid are so adorable
    very very cute
    Blake Builds Van Life is just too good

  • @janr222
    @janr222 Pƙed 2 lety +26

    blake you have a small problem. At the big red wires from the battery you put the fuse at the end. If the insulation is damaged you will get a short circuit to the metal of the car without a fuse in between. This can cause a fire. The main fuse should therefore be located as close as possible to the battery. Have fun building your own bus.

  • @alexroge6495
    @alexroge6495 Pƙed 2 lety +28

    Remember blake, “Grinder and paint, makes us the welder we ain’t.”

  • @mjjbroekman
    @mjjbroekman Pƙed 2 lety +2

    Your friend is a great teacher. Letting you do everything yourself and make mistakes and not judging or making fun of you when something goes wrong is such a great thing to see. You should be very thankful to him. Keep up the good work! Nice series to follow.

  • @Mesa3077Boogie
    @Mesa3077Boogie Pƙed 2 lety +27

    Just the amount of research and knowledge it takes just to plan this is insane. nice work Blake.

    • @gmbn
      @gmbn  Pƙed 2 lety +8

      It's definitely not an easy job! 😅

    • @DocHolliday3841
      @DocHolliday3841 Pƙed 2 lety +1

      @@gmbn
      Around when can we expect this project to be done? January or later than this month?

    • @gmbn
      @gmbn  Pƙed 2 lety

      Hi Doc, It'll be running for a while longer. The van is a long way off from being complete so stay tuned! 😉

  • @liamkent8305
    @liamkent8305 Pƙed 2 lety

    Martin is my new favourite GMBN addition, sarcasm at a pro level.

  • @cgriggsiv
    @cgriggsiv Pƙed 2 lety +7

    The van is coming along with super awesomeness
    It is a pleasure to see Jen and little man in one of your videos again
    Everyone have a good day Blake we all make mistakes you fixed it good keep going

  • @colinfisher2463
    @colinfisher2463 Pƙed 2 lety +4

    I don't have a van or plans to convert one myself, but I can't get enough of watching this series.... Top effort Blake.

  • @rob_j_b6618
    @rob_j_b6618 Pƙed 2 lety +4

    😂 That very end bit! Like a dad telling their kid that they're not angry, they're just disappointed!

    • @gmbn
      @gmbn  Pƙed 2 lety +1

      So true! 😂

  • @jonathandixon8456
    @jonathandixon8456 Pƙed 2 lety +10

    An option would be to link the batteries in parallel to save having two live feeds and two VSR’s

  • @Swiftfury
    @Swiftfury Pƙed 2 lety +16

    Looks amazing Blake, but just getting more and more worried with the fact that you haven't put in ANY Insulation yet ! That van is going to be freezing otherwise :/

    • @blairburton1234
      @blairburton1234 Pƙed 2 lety +3

      Haha. This is my worry too. Insulation was my first project with my van.

    • @janmayen2677
      @janmayen2677 Pƙed 2 lety +4

      Nice to hear i'm not the lonely one worried about insulation.
      Blake, plz, explain us why you didn't anything yet.
      Great job, though!

    • @MehYam2112
      @MehYam2112 Pƙed 2 lety +1

      Are there any solutions for injecting insulation into empty cavities, as can be done with spaces in home walls?

    • @blairburton1234
      @blairburton1234 Pƙed 2 lety +3

      @@MehYam2112 , yes there is, but it's highly toxic.

  • @MrOberliX
    @MrOberliX Pƙed 2 lety +6

    Nice your friend knows how to work with people and create a good environment to learn in 👍

  • @alyssajessie27
    @alyssajessie27 Pƙed 2 lety

    6:10 I love the honesty, Jens cookies also look insanely good.

  • @JaredHerdlevar
    @JaredHerdlevar Pƙed 2 lety +5

    We all need to make sure that this man keeps streaming across the internet for all days!

  • @GAZOD
    @GAZOD Pƙed 2 lety +14

    I think your van would have a smart alternator in which case you would need a B2B not a split charging relay, using a split charging relay instead of a B2B will cause you problems if your van has a Smart Alternator.

  • @maz_mtb3266
    @maz_mtb3266 Pƙed 2 lety

    Being a father of 3 myself, that moment with your family was great. My youngest loves "fixing" stuff in the garage with me.
    I wish these van build videos would all come out like a Netflix series so I could binge watch them from start to finish!

  • @andrewsupernova
    @andrewsupernova Pƙed 2 lety

    Love your build series, seeing your Mrs and kiddo properly brought me back to reality and made me realise you're doing this as a job as much as for us. So humbling.. love you Blakey boy!

  • @chairmanmeow1875
    @chairmanmeow1875 Pƙed 2 lety +2

    Seeing you explain stuff to the little boet is brilliant. That boy has a future

  • @d-nicebikes
    @d-nicebikes Pƙed 2 lety

    Blake, the less fun business of wiring.....you still managed to make it more bearable. Bound to be some 'mistakes' along the way, it's what will make you appreciate the 'Transugatti' build that much more. Enjoying sitting in on the journey, thanks for taking us along. Cheers!

  • @TrailsJunkie
    @TrailsJunkie Pƙed 2 lety

    Ah a van, vanlife. A mountain biker's dream đŸ€˜đŸ€™

  • @evigvandrare
    @evigvandrare Pƙed 2 lety +10

    Absolutely loving this! This van is going to be wicked.

  • @badbradmx
    @badbradmx Pƙed 2 lety +2

    From what you explained about the cables and the fuses it sounds like you weren't going to fuse the cable runs at the starter battery? Fyi, car audio fuse holders are good for this, they are designed for high current and can seal to be water resistant.

  • @Randomisrory
    @Randomisrory Pƙed 2 lety +1

    Victron stuff is fantastic and use a stirling 60amp charger dc to dc great stuff. I run my 3000w pure sine wave inverter to charge my ebikes boil the kettle etc.

  • @Silverhaze78
    @Silverhaze78 Pƙed 2 lety +3

    You can tell Blake likes his full size vehicles after having a wrangler and now a full size van. Keep up the great work and be safe on those narrow roads. 👍🏿

  • @mattb05
    @mattb05 Pƙed 2 lety +2

    Absolutely loving this series!! Getting all these ideas for my van even though it is just a little SWB

  • @gordoncahill1170
    @gordoncahill1170 Pƙed 2 lety +3

    Finished a full conversion of the same size Transit last year. Three month project. 1. You need to double fuse those battery cables. 50 amps at each end. Or you'll potentially burn the thing to the ground or worse, if you're asleep when it goes. You need you master switch before the fuse box or busbar. 2. Get onto your insullation and sound deadening now. You've already made fairly big compromises when it comes to keeping warm by welding to the floor. I'd be looking at sound deadening and insulation of floor walls and roof as soon as possible. 3. Why separate battery systems? Seems overly complex and more expensive. If you combine you leisure batteries in parrallel you'll only need one inverter and be providing it with more efficient power. One fuse box to diagnose issues. The money saved on doubling up can go to increasing you battery and/or solar capacity. 4. Lithium. Only lithium. More expensive but higher usable capacity, lighter and a better choice for charging your eBikes. 5. You probably need a B2B charger for your model van no an isolator. 6. The Joolca is greatlame inside the housing. I'd probably mount it to the back door instead of inside so you can properly isolate and vent it when in use. 7. If you're doing any water system that should be done soon. Put it on top of the insulation to stop freezing issues. Good luck. I hope you love your van as much as we do, ours.

  • @gazhos
    @gazhos Pƙed 2 lety +3

    Very optimistic to have solar roof living in the UK. Excelent work man, really like how the build is going

  • @danbray3960
    @danbray3960 Pƙed 2 lety +8

    Blake, you should have wired your batteries together to double the capacity, then you would have just needed one live wire, one inverter, etc. If you want any advice get in touch. I've done a few race vans

    • @Cassienope
      @Cassienope Pƙed 2 lety +1

      The doubling up everything was interesting. Really not sure why he did it. On the plus side. He does have have double.

    • @miless2111sutube
      @miless2111sutube Pƙed 2 lety +2

      @@Cassienope I was assuming that it was so that the one in garage can't drain the one that they're using for the living space?

  • @matthewjohansalonga371
    @matthewjohansalonga371 Pƙed 2 lety +3

    This van is going to be really sick after it's done!! Nice build man(:

  • @dylanslater919
    @dylanslater919 Pƙed 2 lety +1

    These Van builds are just getting better and better can’t wait for the next one

    • @gmbn
      @gmbn  Pƙed 2 lety +1

      It's definitely taking shape! Thanks for the support, Dylan! 👍

  • @dylan-5287
    @dylan-5287 Pƙed 2 lety

    Been loving the blake build series. The garage shop last year was excellent and the hardtail was so cool. This is another level. Those adventure vans look so sick, more stuff to save up for haha.

  • @danmar94
    @danmar94 Pƙed 2 lety +3

    Was like the Interstellar scene behind the book case watching two vsr's and two batteries going in. Going to make it such hard work for yourself!
    Should have used a b2b with the two batteries next to each other in parallel (van will have stop start so a vsr won't fully charge them. It'll also kill your alternator). One beefy inverter with a changeover switch for the 240v shore hook-up would mean the same sockets could be used for your ebikes wherever you're getting power from.

  • @ChefBrian1
    @ChefBrian1 Pƙed 2 lety +2

    Love these videos. Great work Blake!

  • @jaredjosiah9089
    @jaredjosiah9089 Pƙed 2 lety

    Buzzing! very happy to see this today!

  • @daveincowes
    @daveincowes Pƙed 2 lety

    excellent series, great work Blake, I am loving it. Bringing back memories of fitting out the Cookie Monster (VW T5 in Danish Blue) The slim lower draw is absolutely genius, a very clever solution. Keep up the great work... and stay warm. #alwaystimefortea

  • @oakleymaliska5359
    @oakleymaliska5359 Pƙed 2 lety +1

    these videos make my day, Great work blake!!

  • @tngkr
    @tngkr Pƙed 2 lety

    love this series and cant wait to see the finished van!

  • @joshbb9463
    @joshbb9463 Pƙed 2 lety

    That is some milky tea Blake! Great work!

  • @jeskli11
    @jeskli11 Pƙed 2 lety +4

    It'll be very nice van once it's done. Don't forget to put some security layers before you'll start insulating it - see CZcams channel Ladi and Margret, they've done a good video about this topic recently.

  • @MarkToddMJT
    @MarkToddMJT Pƙed 2 lety

    Great work Blake! Loving this series!

  • @lynwoodbeckles2554
    @lynwoodbeckles2554 Pƙed 2 lety

    Earthed in the UK , Grounded in North America. RAD !!!!

  • @tobiasiserhot4880
    @tobiasiserhot4880 Pƙed 2 lety

    I Love this Series Blake đŸ„° It will be a amazing Van.

  • @ddsgardening7437
    @ddsgardening7437 Pƙed 2 lety

    Love the work boy your a great team can't wait for part 5🙏🙏đŸș

  • @patrickbarrett5790
    @patrickbarrett5790 Pƙed 2 lety +2

    this is a fantastic series! I am really looking forward to the next episode!

    • @gmbn
      @gmbn  Pƙed 2 lety

      Thats great, Patrick! Stay Tuned! 👊

  • @manolis3948
    @manolis3948 Pƙed 2 lety +5

    Please make a blake builds a bike park đŸ˜‚đŸ€™đŸ€Ÿ

    • @gmbn
      @gmbn  Pƙed 2 lety +1

      That would be insane! 😅

  • @bhamlax6
    @bhamlax6 Pƙed 2 lety +1

    Highly recommend a foot valve for that boiler/shower if it doesn’t come w/ one already so the pump doesn’t get jammed up and burn out 👍

  • @dorkysaur
    @dorkysaur Pƙed 2 lety

    I really enjoy this van build series cause I am learning stuff and Blake is just an awesome human being.

    • @gmbn
      @gmbn  Pƙed 2 lety

      Glad to see your loving the build, @Blackfire! Stay Tuned! 👊

  • @the_spanner_ch7mp
    @the_spanner_ch7mp Pƙed 2 lety

    Yes more Blake (and Martyn ) builds đŸ€˜
    Vans coming on nicely
    We all learn from our mistakes and good that you (Martyn) noticed it early .
    Oh and I think your #GMBN Stunt mug needs a good clean 😜😂
    Great stuff đŸ€˜

  • @itsyaboiclark4194
    @itsyaboiclark4194 Pƙed 2 lety

    I LOVE BLAKE BUILDS, I'VE BEEN WAITING FOR THIS EPISODE SINCE PART 3

    • @gmbn
      @gmbn  Pƙed 2 lety

      Thanks for the support! đŸ€˜

  • @raphaelwolff8205
    @raphaelwolff8205 Pƙed 2 lety

    LEGEND ITS LOOKING GOOD.

  • @bluestraycat
    @bluestraycat Pƙed 2 lety

    I love this series so much

  • @littleshopofrandom685
    @littleshopofrandom685 Pƙed 2 lety +1

    I'd dispute the term "hot" water with that kit. So called instant hot barely work when connected to 100 amps of 3 phase mains power. At best, it will be a bit warmer than a freezing river. :)

  • @SquashysDaddy
    @SquashysDaddy Pƙed 2 lety +1

    Nevermind Blakes builds, Van life. How about Blake and Monkey just chat. So cute.

  • @dazmtb
    @dazmtb Pƙed 2 lety +2

    I’m so loving your van build series and totally hooked. I don’t know who’s more excited you or me to see it finished ✅ đŸ™ŒđŸŒ

  • @JasonFoxLCB
    @JasonFoxLCB Pƙed 2 lety

    I don't know how I missed the first three episodes (yes, I'm subscribed), but this is a hoot.

  • @jeremyrobson7414
    @jeremyrobson7414 Pƙed 2 lety +4

    Won't running live wires through a solid metal frame make the rack live if the wires insulation ever wears down

    • @gmbn
      @gmbn  Pƙed 2 lety

      Hi Jeremy, All of the wiring is safe and insulated so there is very little risk. 👍

  • @kmurashov1
    @kmurashov1 Pƙed 2 lety

    Waiting for new episode is like for presents on Christmas morningđŸ”„đŸ”„đŸ”„

    • @gmbn
      @gmbn  Pƙed 2 lety

      🧑‍🎄

  • @jackieminka1161
    @jackieminka1161 Pƙed 2 lety

    Loving this series! Doing a build from scratch is complicated and this behind the scenes is really helpful. One question/comment - on the wire run through the steel pipe, are the ends of the pipe rounded or padded to prevent friction against the casing? The rattle of driving could wear down the wire casing over time which would be dangerous. Have fun and stay safe!

  • @Hooknlinefishing
    @Hooknlinefishing Pƙed 2 lety +1

    I just absolutely love this series

    • @gmbn
      @gmbn  Pƙed 2 lety +1

      Glad to hear it, Charlie! Thanks for the support! đŸ€˜

    • @Hooknlinefishing
      @Hooknlinefishing Pƙed 2 lety

      @@gmbn thanks

  • @tobythornber3465
    @tobythornber3465 Pƙed rokem

    Looking good

  • @Rockhopper1
    @Rockhopper1 Pƙed 2 lety +1

    please shock mount your inverters, sat above the wheel the vibrations will damage them.

  • @BOLLOX64
    @BOLLOX64 Pƙed 2 lety

    Expect you'll be hitting the bike resorts in Europe, so it'd be wise to also have a 2-pin EU socket on the outside as well, for connecting to the mains

  • @tomoliver1996
    @tomoliver1996 Pƙed 2 lety

    hate to give ya the news after all that welding, but JOOLCA make a mounting bracket for the system. and also might be best to put it on a hinge as it produces quite a bit of heat from the top vents possibly damaging the bed above.

  • @Butter__knife
    @Butter__knife Pƙed 2 lety

    You are always welcoming The beautiful people! Well what about the rest of us?

  • @junka1975
    @junka1975 Pƙed 2 lety

    Mistakes happen Blake. That chocolate chip biscuit looked very tasty, if you have a wonderful wife who bakes for you, you are a very lucky man (buy her some chocolates as a thank you.). Your son was having a ball by the looks of it seeing his dad work. All in all a great effort. The van looks like it's going to be epic. 😎👍

  • @rubenmehta1586
    @rubenmehta1586 Pƙed 2 lety

    good job blake keep up the grate work

    • @gmbn
      @gmbn  Pƙed 2 lety

      Thanks, Ruben! Glad to see your loving the series! đŸ€˜

  • @stujm8376
    @stujm8376 Pƙed 2 lety +1

    Am loving this, I would love to have the opportunity to do the same thing. A mate is planning to turn a van into a camper, I don't think he realises just how much work is involved.......

    • @gmbn
      @gmbn  Pƙed 2 lety

      It's certainly more work than we expected! 😅

  • @paulhowell1534
    @paulhowell1534 Pƙed 2 lety

    Great series 👍 Martin wasn’t angry......just disappointed 😂😂

    • @gmbn
      @gmbn  Pƙed 2 lety +1

      Thanks for the support, Paul! 😂

  • @weekendshredding1958
    @weekendshredding1958 Pƙed 2 lety

    BLAKE JUNIOR!!😜

  • @elanorfairbairn
    @elanorfairbairn Pƙed 2 lety

    I don't like DIY. Or vans. But I looove your series Blake!

  • @WUmatoWU
    @WUmatoWU Pƙed 2 lety

    best episode

  • @nilz6432
    @nilz6432 Pƙed 2 lety

    The 12v positives which connect the batteries should get some protection from getting worn through, especially the one running through the metal pipe. Run it through a plastic tube or something similar.

  • @66tiny93
    @66tiny93 Pƙed 2 lety

    Grab some alcohol and drink every time Blake says "HERE" HAHAHA. Great work mate!

  • @BikeLifewithRob
    @BikeLifewithRob Pƙed 2 lety

    Keep buiilding!

  • @martintin250
    @martintin250 Pƙed 2 lety

    Brilliant, I chuckled when it was -2


  • @alexh.4068
    @alexh.4068 Pƙed 2 lety

    Hi Jen, let's have that cookie recipe :-) New series, Jen Bakes!

  • @cityproofdad
    @cityproofdad Pƙed 2 lety

    Way good what a van that will be

  • @tomb2289
    @tomb2289 Pƙed 2 lety

    No chance I'd have got that weld right either to be fair. Love this series!

  • @zsanterre
    @zsanterre Pƙed 2 lety

    Can we get an episode where Martin explains the complex details of the wiring? Like are you converting a DC/DC to the 2 AC/DC batteries? It looks like thats what you're doing.

  • @bobothericefarmer1878
    @bobothericefarmer1878 Pƙed 2 lety

    Lesssshhh gooo another 1

  • @pulser955
    @pulser955 Pƙed 2 lety

    Looks really good. But pro tip never but screws in the the end grain of plywood. It will not last and will fall apart latter. And any time you are building things with wood to go in to a van you should glue and screw.

  • @lordoverride
    @lordoverride Pƙed 2 lety

    Best part of the video: The cookies. đŸ€— Sorry Blake.

  • @Hooknlinefishing
    @Hooknlinefishing Pƙed 2 lety

    Keep it up

  • @junaustria0119
    @junaustria0119 Pƙed 2 lety

    Blake. For shelving. It's best to use a laminate finish on it then a paint finish. My suggestion only.

  • @ConorPhe
    @ConorPhe Pƙed 2 lety +1

    Are you putting in a split charge relay or a b2b charger? That van looks new enough to have a smart alternator so would need a b2b. This caught me out when building my van!

  • @sargy9586
    @sargy9586 Pƙed 2 lety +2

    Milk in first blake! You bloody mad man

  • @malintous1
    @malintous1 Pƙed 2 lety

    That's great, the water system running off its own battery when you already ave mains and 12v system seems counter intuitive though

  • @badlarry172
    @badlarry172 Pƙed 2 lety

    "all i could hear was the hammer" 😆

  • @rupedog
    @rupedog Pƙed 2 lety

    looks like it will be epic.
    No insulation in those voids?

  • @hammyh1165
    @hammyh1165 Pƙed 2 lety +1

    Should run Lithium leisure battery's , they run for ages off of solar. Bit spendy though.

  • @schoolvideos1620
    @schoolvideos1620 Pƙed 2 lety

    NEW BLAKE BUILDS!!!!

  • @stephenwilliams8196
    @stephenwilliams8196 Pƙed 2 lety

    Blake has your little one been introduced to Ben Deakin 12:40 “Oi Oi”

  • @Twigster1
    @Twigster1 Pƙed 2 lety

    WHOA WHOA WHOA Blake!!! Never mind the build, you put milk in before the teabag is out?!?!?!

  • @reiddryden9805
    @reiddryden9805 Pƙed 2 lety

    Check out the shower Ronnie Dahl has on 4wheeling AUSTRALIA

  • @dr_delay
    @dr_delay Pƙed 2 lety

    @zimblake I hope you have factored in the switch from 27.5" to 29" wheels for the hard tail when it comes to the bike garage in the van.. :-)

  • @denesk2794
    @denesk2794 Pƙed 2 lety

    In a vehicle used for bikes my primary requirement is to fit 1, preferably 2 or 3 bikes WITHOUT ANY DISASSEMBLY. No twisting bars, no taking wheels out, no messing with any of the components in any way other than dropping the seat with the dropper post.
    Also preferably bikes should be inside when parked, preferably chained/alarmed/electrified and booby-trapped because the world is filled with bike thieves.
    Just my 2c. Currently own a pick-up that fails in some ways (locked inside) ... looking at a Hiace (2018) that might fit 2-3 bikes and provide *some comfort*. While not being a "driving a boat" experience at the same time. Not for camping, just day trips taking a normal and an e-bike to bike parks.

  • @DeanJonathanNeal
    @DeanJonathanNeal Pƙed 2 lety

    What invertors and leisure batteries did you use? I'm about to fit one in my van!

  • @martinwheatley1639
    @martinwheatley1639 Pƙed 2 lety

    How have you fitted the split charge relay.. I thought you would need "CTEK" charger because of the smart alternator?