2005 Toyota Corolla - Passenger Side CV Drive Axle Replacement
Vložit
- čas přidán 30. 07. 2024
- Learn how to replace the passenger side CV drive axle and output shaft seal on your Toyota vehicle.
2005 Toyota Corolla - Driver's Side CV Drive Axle Replacement
• 2005 Toyota Corolla - ...
If you would like to support my channel and help me post more content. Please donate here.
Please click the link: www.paypal.me/MooseMobile
If you like my video please SUBSCRIBE & LIKE & SHARE.
Please click on the bell notification if you want to be notified when I put out a new video.
TIMELINE:
-----------------
00:00 - INTRO
00:05 - SETUP
00:39 - REMOVE WHEEL
00:49 - UNSTAKE AXLE NUT AND REMOVAL
01:52 - LOWER CONTROL ARM / BALL JOINT REMOVAL
02:20 - AXLE REMOVAL
03:07 - DRAIN TRANSMISSION FLUID
03:59 - AXLE REMOVAL CONTINUED
04:56 - SEAL REMOVAL
05:40 - SEAL INSTALLATION
10:26 - COMPARE OLD VS NEW PART
11:19 - ABS TONE RING REMOVAL
12:07 - LUBRICATE AXLE SPLINES
12:47 - AXLE INSTALLATION
16:20 - REASSEMBLY OF COMPONENTS
19:45 - REFILL TRANSMISSION FLUID
20:13 - REINSTALL WHEEL
20:34 - CLEAN UP
20:57 - ROAD TEST / END - Auta a dopravní prostředky
If you enjoyed this video and found it helpful please support my channel by hitting the LIKE 👍and SUBSCRIBE buttons and turning on the bell notifications to get notified when I put out a new video.
2005 Toyota Corolla - Driver's Side CV Drive Axle Replacement
czcams.com/video/rwvG0tNwOVI/video.html
I need to replace the near side driveshaft and wish to do the work myself. With the correct tools and your great video I can. Thank you very much.
Gracias! muy buen video!
So... The seal has to be flushed with the transmission case lip??? I changed that seal twice now because it kept leaking, but i wasn't even paying attention to that little detail. Will try to get it flush instead of tapping it all the way in!!
One question, what do I know the name of the tool to remove the gasket ring from the cv axcel to the transmission?
I believe the tool you're talking about is an axle seal puller tool to remove seals out of transmissions.
@@moosemobileautorepair thanks.
A question: how are these axles holding up? I hear people routinely denigrating aftermarket axles. What's been your experience with them? WHich brand do you think is best?
The axles are doing pretty well. Lately, I have been seeing that aftermarket brand new axles are better than the OEM axles on vehicles believe it or not. Once in a long while or blue moon I may have an axle with a slight vibration at a certain RPM like 3200 to 3600 RPM or something so I just exchange it for a different one and that usually happens on ones with unequal lengths axles such as on the passenger side like on these vehicles.
Any time I replace an axle it is usually because the original OEM axle has failed or is bad. Some OEM axles will last a long time and some won't. It also depends on the driving conditions and driver abuse. Any kind of repetitive abuse to the axles will ruin it regardless if it is OEM or aftermarket.
I use Trakmotive (SurTrack) and Cardone axles. Only use brand new ones never use remanufactured axles. Remanufactured axles are nothing but problems. Aftermarket axle companies have gotten better over the years and they are much better now than say a decade ago.
A question, Moose: is it really necessary to "unstake" the drive axle nut? It might help but it seems to me that the metal is rather soft so if you use a strong impact, it should spin right off.
Do you agree? (I have never done this before.)
Yes and no. Depends if you are reusing the axle or not. Otherwise, the threads could get damaged. Some axles I haven't unstaked and there is no damage and some the threads get damaged. The axle nut will typically unstake itself, but you're best to unstake it before removal to make it easier to remove and to prevent damage unless you are replacing it.
My Corolla shakes when accelerating… do you think changing the axle will fix the problem?
The axles could definitely cause that on acceleration only. I would also check the steering and suspension and all engine/transmission mounts just to make sure everything checks out OK.
Whats the purpose or removing the abs tone ring?
This vehicle does not have ABS. Sometimes the tone ring will interfere with installation inside the steering knuckle sometimes it won't. If the axle won't go into the hub then you need to remove the tone ring.
This manual transmission?
Automatic.
Good luck with those Chinese rebuild CV joint shaft.
Those axles are brand new not rebuilt. The remanufactured ones are usually junk. I've used many of the new ones on a variety of vehicles and haven't had any issues. Some I've been using for years and works longer and even better than the OEM ones.
Thank you for the replay. It's always nice to know.
No problem. The only thing I can say is sometimes there may be vibration problems with some axles, but lately the ones I've been using I've had no issues with them.