Shop Truck Intake Plenum Repair - 1996 Dodge Ram
Vložit
- čas přidán 4. 11. 2021
- The Shop Truck seemed to be using some oil between changes. I knew that the intake manifold had been sucking some oil at the base so it was time to get it fixed. I ordered a kit from Hughes Engines and spent the afternoon getting the old girl back in shape.
Enjoy!
House of Mopar email HofM1937@gmail.com
#houseofmopar
Hughes Engines Plenum repair kit: hughesengines.com/Index/produ... - Auta a dopravní prostředky
You just keep doing you, Chuck. We'll be fine. Good seeing you again.
- Ed on the Ridge
Hey Ed, shoot me an email.
Just became a subscriber,like your style,right to the points.
Thanks Dave, I'm no expert and that's for sure. Just an old dude playing with his toys.
Good video. Horse walks into a bar - bartender says - why the long face. Enjoy your content and channel. Thanks for sharing.
Ha Ha, yeah that's right. Thanks for watching
Oil gets worse that, good thing you got it early
Very true
Thanks for video!Where did u get the Hughes kit?
Straight from Hughes Engines.
www.hughesengines.com/Index/products.php?browse=search&search=magnum+intake+plate&partid=27091
Factory style air cleaner cleaned up the engine bay a little. Thanks
It sure did, Thanks
@@Chuck_House_of_Mopar a transmission that you put in that pickup I got two of them Transmissions to problem I got with finding the right driveshaft
The automatic transmissions they put in you slave autotrail they are junk
Rudy, I got a driveshaft from a truck at the junkyard, basically for the front and rea yokes. Then I had to have one custom made at a local drive shaft shop.
Hope that helps.
Thanks
Would this same procedure apply to a 2001 B1500 van with the 3.9 liter V6? Is this basically the same engine that's in my van?
I work on mostly foreign cars but I'm not familiar with this particular design. Thanks!
That I do not know. I would suspect that the intake is of a different design.
whats the sensor on the left of the distributor, its in the block
I'm not sure off had, but if it's behind the distributor it's the oil pressure sending unit.
Did Hughes have the plenum kit in stock ? When did you purchase the kit jus very recently or back a while ago ?Or did you have to order an wait for it to come in ? I checked there online stock an it said they had none in stock an didn’t know when they have more plenum kits back in . If that have them in I better give them a call an get the kit I need one bad for my cousins truck ! Let me know I appreciate an that was a good video 👍
I gave them a call and they had one in stock. They were out of the kit that had the Felpro gaskets so I just used the kit with the standard gaskets.
Thanks
I just ordered it a few days before I did the project.
@@Chuck_House_of_Mopar is there any way that you could send me a phone number for Hughes parts. I need to order the kit for one of my Dodge's trucks. I would appreciate it very much. Thanks.
Sure Mark, Here is there web address. The phone number is at the top www.hughesengines.com/Index/index.php
I did this job and left a trash bag in the valley. That takes the cake
Woops
Is it recommended to put silicone gasket maker when installing the intake manifold gaskets
That Permatex Ultra Black is the real ticket. You'll use that on each of the 4 corners where the rubber gasket sits. Where the head and China wall meet and that's about it. It's not a bad idea to maybe put just a couple of small dime sized squirts of permatex just to hold the paper gasket in place so that it doesn't move when you put the intake on.
Does that make any sense?
@@Chuck_House_of_Mopar yes thank you
What are the torque specs on torquing down the intake manifold to the heads
I do not remember, I'm sure that they're on the web somewhere but they don't take much. Maybe 15 foot pounds?
I have a 97 dodge ram 1500 5.2 and got a big leak coming from bottom of the truck I’m thinking it’s plenum gasket / intake gasket from research do those gaskets leak coolant is my question?
I don't think that you can expect a coolant leak from the plenum gasket. It could be from the intake manifold gasket itself. I don't need to tell you this, I'm sure, but try to trace the leak back up to the top of the motor if you can.
@@Chuck_House_of_Mopar sounds good thanks for the info I’m going to replace my intake gaskets and pass on the plenum gasket and go from there I’m only leaking coolant going all the way down on my transmission not oil any other tips you have
@@tinohurtado9471 As long as you have that intake off, you really should replace the plenum gasket. I promise you that it is sucking some oil.
You don't have to get "stupid" like I did and by the kit from Hughes. Just get a new gasket from the same place that you're buying your intake gaskets from.
You're going to have the intake off anyway.
fwiw
How did you fix those vacuum ports you broke u talked about
I had others I picked up from a yard, and also bought some new ones. Parts stores carry them. You can test them by simply sucking on either end to see if they still work.
@@Chuck_House_of_Mopar is it a one way or two
@@eivad1 If you're talking about those little, round inline valves they're one way only. Here's one from NAPA.. www.napaonline.com/en/p/ATM058905291K?cid=paidsearch_shopping_dcoe_google&campaign=GSC-Fuel-Emissions&campaign_id=10951730297&adgroup_id=113117085528&adtype=pla_with_promotion&gclid=CjwKCAjwzY2bBhB6EiwAPpUpZqFv9q902moaTKjFw8PDbIjOKvLg4hUxEBCgI0IkQUGxnPe7_aeyWRoCRYYQAvD_BwE&gclsrc=aw.ds&
I was never sure those K&N filters were worth the effort or cost.
They help it breathe, but probably not worth the extra dirt that gets pulled in.
They are not worth the $$$ for a couple hp
You will notice the power loss .My son inlaw went a secound faster with his 2001 Ram at the drag strip just unhooking the factory air box . We just put chrome air cleaners on now . Alot cheaper than KN.
I believe it. This is just a daily driver, so I didn't want to mess with the KN anymore. This thing only made 245HP on its best day anyway.
Thanks
As easy as that bottom cover came off, I can see why it leaked.
Yes, I should have pointed out the spots where the gasket had failed.
The intake manifold on these (kegger) torqued down to 12ft/lbs. Follow the instructions in the service manual or the Hughes instructions...exactly If you don't, you'll be doing this repair again in a short period of time.
Cool, you soulds like me. I think i could do mines.
I'm sure that you can knock it out. I was needing to do this for some time.
Wouldn't it also build up oil from valve cover vents
Not sure what you mean exactly Thomas, but this is a known problem with the Magnum plenum for many years. Chrysler actually had a PCM update that detuned the engine to stop the spark knock from the excessive oil that was drawn in.
Was the updated PCM on OEM vehicles an what yr did they start that
@@Chuck_House_of_Moparreally hoping this is what's wrong with mine misfires hard under load an light acceleration but if I stomp it to the floor it's fine
@@thomaslockley945 I'm not sure when they started all of that, but it was a long time ago. This problem reared its head way back when. You don't see any smoke, only your oil quantity dropping.
@@thomaslockley945 Hard to say, but it's worth looking into. Are you using oil?
Transmission that you took out of that junk yard I watch another junkyard I got to the Transmissions at a junkyard
Nice, they're harder to find.
I did the same to my dodge 1500. Your cat is probably no longer any good with all the oil clogging it up. I had to change mine after doing this repair.
Well, I never thought about that. So far so good and I've been passing emissions.
Thanks
@@Chuck_House_of_Mopar Mine went on for a while. It's also a good idea to swap out the upstream sensor every 4 yrs. Mine was sensing a lean condition and was calling for the ecm to dump more fuel. It went bad. And since it happens gradually, it was hard to notice. When I had my cat changed you could hardly see through it. And the engine loping was gone with no more excessive back pressure. I have 27 yrs on my 96 Dodge ram 1500 5 speed. It will be the last thing I ever drive.
@@Hardcorediver44 I'll keep everything in mind. Thanks
LOL, You skipped the most important part. Taking it out.
I suppose that you're right. It cured the oil burn problem.