FSCM Diagnosis GMT-900 Fuel System Control Module GM Trucks

Replacement FSCM 07-09 Online Ordering-
plugnplayautop...
In this video, we are going to cover the proper diagnosis of the Fuel System Control Module. You will need a test light or a power probe to test for power at the connector.
Also, the common code seen with FSCM Failure is P069E. The fuel System control module requests MIL illumination.
With the Key on you will need to test for power at
Pin 13 Dark Green and White Wire
Pin 15 Pink Wire Ign 1 voltage
Pin 32 Red and White Wire
Check Ground at Pin 1 Black Wire
If you do not get power at the above circuits please check for broken wires, blown fuse, relay or bad PCM/ECM.
We Sell brand new FSCM, FTCM and ITBC Modules Programmed to the VIN Number of the truck requiring the replacement.
FSCM 07-09 with free shipping
ITBC Modules are Also available as a relay kit.
All Module Prices include free shipping.
Please call 636-795-6960 to place orders or use the web links below. ⬇️
DIY Diagnostic Procedure
plugnplayautop...
Online ordering for 2007-2009
plugnplayautop...
Connector Parts
plugnplayautop...
Order by phone @
636-795-6960
Please note on the green and white wire
IMPORTANT GREEN/WHITE WIRE CONDITIONS
CHECK FOR ONE OF THE FOLLOWING THREE CONDITIONS 1. CONSTANT 12V POWER 2. POWER ONLY WHEN CRANKING 3. POWER FOR 3 TO 6 SECONDS WITH KEY ON. WIRE/PCM INTEGRITY PASSES IF ANY OF THE THREE CONDITIONS HAVE BEEN SATISFIED.
Spartan Autoworx, LLC
636-795-6960
Diag-
plugnplayautop...
New FSCM Ordering-
plugnplayautop...
Connectors and pin kits
plugnplayautop...