bugs me so much when I check out a review video and the person is just standing in front of the camera for 10 minutes talking, and MAYBE gets to some footage of them using the tool.
Good point. I don't speak in my videos but wanted to make some "silent reviews". I thought it would be weird though. I guess it the tool isn't too complicated and needs explanations than it would be fine.
This video was really informative as I am new to routing and bought a couple of molding bits and was not sure how to use them. This video taught me a lot.
Que bonito, la verdad aqui en mi país muchos nos hacemos eso en varias pasadas mas tiempo mas complicado y no todo el tiempo queda perfecto como se ve en el video gracias 👍👍
I am glad to see these in use ! I have several of these bits, but have not been able to use them yet due to a new job. Thank you for your review and all the vids you have done. BTW, what horse power is the router that you are using?
These bits seem to do a great job. The question is : For how long will they keep performing like this. This said, thank you for taking the time to show us your experience Mister Je. :-)
Nice, I was thinking you could make a jig to hold the wood at different angles insted of just 90dgr like crown is shaped Becuse the routers always going to be st 90 dgr you need a jig that can holt it at 22.5. 45. 60. Or any angle off of 90 you decide would look good, for picture frames some frames are just that over a canvas.
very good video, my congratulations. I would like you to help me with a question: I want to know if you make or can recommend who can manufacture custom router bits according to my product draws.
Please do an update after some hard use. I'm always sceptical that these work great out of the box but might lose their edge or have their bearings burned down after a short while.
you can replace the bearings those things are cheap , im using the smaller outers that come in a box and they last me in hobby use for about 20 years now , even routed through some bradnails ocasionally by accident , think the most importand question would be how well do the matched pair routers work like for making raised cabinet doors
1959Berre MDF is hard on cutting tools! We used to do a production job using MDF that required flat bottomed holes cut with Forstner bits. Didn’t matter what brand we used from cheap Chinese to CMT and Freud, they all dulled rather quickly tho the better brands did last longer. MDF is very abrasive for some reason. I suspect the glues and binders they use in producing it.
I bought this brand before, never again. Horrible vibration, my router cabinet almost vibrated off the table. Just pay the extra money for the better brand, it's worth it.
Ill stick with Whiteside, Freud, and Infinity router bits. I like bits that will make consistently clean cuts project after project. Those cheap router bits may be good for one project, but they are garbage for the next. They just don't hold an edge. Besides that. I am just not going to skimp on something that will will be spinning up to 20,000 RPM in my face.
Anh Nguyen xin chao ban . tieng anh mih kem nen ko hieu ! ban cho mih hoi chut dc ko ! ninh cug muon so huu cai mui soi nay nhung ko bit mua oi dau ban giup mih voi
I have done it in the same way for many many years, almost every day and i have never had problems, just keep your fingers away an feed the wood slowly.
Thanks I am a beginner in this but I know I will succeed in the future. Thank for your class and the sharing your knowledge. Grettings from Puerto Rico.
Great review, wasn't expecting them to be any good without some serious sharpening.Just one question, were you paid for this? Not that there is anything wrong with that but it would be nice to know.
Wemja CZcams requires paid promotion (including free products) to be disclosed very clearly with an annotation or caption as part of their monetization agreement. He shows his receipt (~$2) to show that he paid for the bits.
Hugo cabellos balladares , mira esos bits como le llaman en USA, en otros países creo que le llaman fresadoras, torneadoras, muchos nombres, bueno son marcas genéricas, por lo general son compañías americanas o europeas que las hacen en china para ahorrar mano de obra pero quiere decir que sean malas, yo uso mucho la marca Yonico, si vas a EBay los verás, son idénticas a estos, yo diría que lo mismo y a buen precio, creo que Amazon lo tiene también, suerte.
I don’t know dick about wood working, but it looks as if you need a gate to hold the board against the cutter. Put a bolt up thru the table beside the cutter. Put a round roller over the bolt. Now the roller will squeeze the board into the cutter head and keep the proper distance set. To change the distance use a thinner or thicker roller on the bolt. Should work. But with climb milling the board will jam. Don’t climb mill.
Excellent video, no time wasting yapping, and no pop up adds, first class.
👏👏👏👏👏👏👏👏👏👏👏
One of the only makers on youtube that can do a "review" video without talking. Nothing but action and results. My man!
bugs me so much when I check out a review video and the person is just standing in front of the camera for 10 minutes talking, and MAYBE gets to some footage of them using the tool.
Good point. I don't speak in my videos but wanted to make some "silent reviews". I thought it would be weird though. I guess it the tool isn't too complicated and needs explanations than it would be fine.
"Unboxings" are even worse. Why is it so difficult to understand that I don't need to see 4 minutes of footage of cutting a box open!
Do you speak Chinese? Lol!!!!!!!!
No annoying music, either.
Thanks for your skilfull woodworking videos. I'm a fan of them here in Brazil.
A big WOW from me... love the finishes. Really nice details
Thank you for the volume warning in the captions!
This video was really informative as I am new to routing and bought a couple of molding bits and was not sure how to use them. This video taught me a lot.
That box is neat to look at.
Really amazing bits, man... Fantastic!
Beautiful router table!
Good to know. Thanks for sharing !
I never wear long sleeves when woodworking. Nice bits.
Nice bit of kit 👍🏼😊
Que bonito, la verdad aqui en mi país muchos nos hacemos eso en varias pasadas mas tiempo mas complicado y no todo el tiempo queda perfecto como se ve en el video gracias 👍👍
Excellent cutters and excellent overview).
I watch this because I wanted to hear you talk. Who does review without talking? Nice job!
Always love a good deal, thanks Young, looks like you recommend them.
Muy buena demostración maestro
Muy Buen Video Didáctico.
*¡¡¡ BUEN TRABAJO !!!*
I love this machine I wish I can have it
Have they had a lot of use? If so, do they hold an edge? And are the bearings good?
Yes very good router bit and very good worker thank you
I am glad to see these in use ! I have several of these bits, but have not been able to use them yet due to a new job. Thank you for your review and all the vids you have done. BTW, what horse power is the router that you are using?
It is 3 1/2 horse power,
Thank you
never seen the bird’s mouth bit, is it only useful for that type of box you made?
i like the profile bits, those look great
These bits seem to do a great job. The question is : For how long will they keep performing like this. This said, thank you for taking the time to show us your experience Mister Je. :-)
You can resharpen the carbide
C4 carbide is the way to go. They hold a edge way longer like white side or froide or ctm.
Nice, I was thinking you could make a jig to hold the wood at different angles insted of just 90dgr like crown is shaped
Becuse the routers always going to be st 90 dgr you need a jig that can holt it at 22.5. 45. 60. Or any angle off of 90 you decide would look good, for picture frames some frames are just that over a canvas.
very good video, my congratulations.
I would like you to help me with a question:
I want to know if you make or can recommend who can manufacture custom router bits according to my product draws.
Thank you,
the question is how long can they be used before they need to be sharpened?
Hello, which sliding stick do you use there? Could you send me a link to this?
VERY GOOD
Do you have tested the shutter bit?
Very good sir Router bit
I just like the name Bang good that’s pretty epic
Gotta love router bits that look like chess ♟ pieces! Check mate buddy!
Wow 🤩 so amazing
I'd like to know the name of the block pusher he's using and where I might purchase one!
Isn't that the ''Microjig, maker of the gripper'' thing you hear everywhere?
With all of the other complicated tools I’ve seen you make I’m surprised you didn’t figure out a way to make the router bits.
Хорошая работа. Лайк. Вот интересно мне,как поведёт себя фреза на длинных деталях-не перегреется ли она??
Please do an update after some hard use. I'm always sceptical that these work great out of the box but might lose their edge or have their bearings burned down after a short while.
you can replace the bearings those things are cheap , im using the smaller outers that come in a box and they last me in hobby use for about 20 years now , even routed through some bradnails ocasionally by accident , think the most importand question would be how well do the matched pair routers work like for making raised cabinet doors
Which router machine are you using?
Very nice video sir
good cutters.
they make a clean cut and look good, but, how long do they last cutting like that?
That would depend on the hardness of the material: pine, oak, walnut, MDF...
1959Berre MDF is hard on cutting tools! We used to do a production job using MDF that required flat bottomed holes cut with Forstner bits. Didn’t matter what brand we used from cheap Chinese to CMT and Freud, they all dulled rather quickly tho the better brands did last longer. MDF is very abrasive for some reason. I suspect the glues and binders they use in producing it.
John Acuff, it's the glue. For the same reason that glue joints are hard on cutting knives.
Amazing
Opa amigo ...comprei algumas dessas pelo mesmo aplicativo de celular
I bought this brand before, never again. Horrible vibration, my router cabinet almost vibrated off the table. Just pay the extra money for the better brand, it's worth it.
Layman question: what is the orange thing on the table saw?
jorgemt62,
It's a "feather board". The little fins you see provide a springy push to hold the work piece against the rip fence.
Como quisiera adquirir esas fresas son fantásticas ¡¡¡
KLASS!
So it's name bird's mouth molding, I need it to make lathe machine but metal.
What is the name of the bit the two and a half one tha make the door rail
Nice
Ill stick with Whiteside, Freud, and Infinity router bits. I like bits that will make consistently clean cuts project after project. Those cheap router bits may be good for one project, but they are garbage for the next. They just don't hold an edge. Besides that. I am just not going to skimp on something that will will be spinning up to 20,000 RPM in my face.
Lol, I was tricked, i jumped right in as soon as i saw the title, i thought he going to say something, atleast something in Korean.😂
Anh Nguyen
xin chao ban . tieng anh mih kem nen ko hieu ! ban cho mih hoi chut dc ko ! ninh cug muon so huu cai mui soi nay nhung ko bit mua oi dau ban giup mih voi
Anh Nguyen
co j giup mih wa sdt 0988063507 mih sin cam on
Do they have it in 6mm shank? Looks great to me👌😊
boboaldo.com kinds of router bits free shipping
From iraq well done
Hi..im.jun frm ph..i like d router bet just u use..but how wer can i purchased like dat bet..
How have you managed to keep all your fingers?
I have done it in the same way for many many years, almost every day and i have never had problems, just keep your fingers away an feed the wood slowly.
All the Safety Sallys keep him in line. Because you know, he can't just be real careful.
Greatest
What type of wood was that one used?
Thanks
I used red oak
Thanks I am a beginner in this but I know I will succeed in the future. Thank for your class and the sharing your knowledge. Grettings from Puerto Rico.
Perfct
THE BIG WOOD HOLDER WITH WHICH YOU ARE SLIDING THE WOOD WHAT IS IT CALLED AND WHERE TO BUY IT PLEASE LET MY KNOW......THANKS
www.amazon.com/Stackable-Featherboard-Against-Prevent-Kickback/dp/B07QCQCMB8/ref=sr_1_10?crid=JQ2OB92Z4YAA&dchild=1&keywords=featherboards+for+table+saw&qid=1595122929&sprefix=feather%2Caps%2C209&sr=8-10
www.amazon.com/GRR-RIPPER-Pushblock-Router-Jointers-MICROJIG/dp/B001I9UNWC/ref=sr_1_1_sspa?crid=14HRSIEBSMZ8X&dchild=1&keywords=microjig+grr-ripper&qid=1595122821&sprefix=micro+jig%2Caps%2C372&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyNURJWkFOSFA0TTMyJmVuY3J5cHRlZElkPUEwMjM1MjA3MTRXRFRSM0ZXSzNIUCZlbmNyeXB0ZWRBZElkPUEwMjM5NDA2MjhLMjRIRlcwOEVCUyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
THANKS A MILLION WHAT A BEAUTIFUL RESPONSE I REALLY APPRECIATE IT
Hi.lam from egypt haw can l get this product
what the name of that but?
You don’t make your own router bits? LOL.
good
Good
Verygood
boboaldo.com kinds of router bits free shipping
Great review, wasn't expecting them to be any good without some serious sharpening.Just one question, were you paid for this? Not that there is anything wrong with that but it would be nice to know.
Wemja CZcams requires paid promotion (including free products) to be disclosed very clearly with an annotation or caption as part of their monetization agreement. He shows his receipt (~$2) to show that he paid for the bits.
👍
manoj sharma haratu latehar
So super
I was looking to buy the but my router's shrank is 8mm.
Good to see you still have your fingers. Some scary shit with them next to a router bit.
Hola excelente la demostración de que país son y como puedo comprarlo saludos desde Trujillo PERÚ.
Marco Gallegos ok gracias amigo
Hugo cabellos balladares , mira esos bits como le llaman en USA, en otros países creo que le llaman fresadoras, torneadoras, muchos nombres, bueno son marcas genéricas, por lo general son compañías americanas o europeas que las hacen en china para ahorrar mano de obra pero quiere decir que sean malas, yo uso mucho la marca Yonico, si vas a EBay los verás, son idénticas a estos, yo diría que lo mismo y a buen precio, creo que Amazon lo tiene también, suerte.
Hugo cabellos balladares pudes comprar por internet en eBay
i'm looking for this kind of bits
boboaldo.com kinds of router bits free shipping
PLEASE CAN YOU SEND ME A LINK TO BUY THIS LARGE ROUTER BIT I NEED IT DESPERATELY....................THANKS
goo.gl/8uF2tq
goo.gl/UZtn8r
goo.gl/QZL6Mc
Yeh bataiye kaha par Milenge
I don’t know dick about wood working, but it looks as if you need a gate to hold the board against the cutter.
Put a bolt up thru the table beside the cutter.
Put a round roller over the bolt.
Now the roller will squeeze the board into the cutter head and keep the proper distance set.
To change the distance use a thinner or thicker roller on the bolt.
Should work. But with climb milling the board will jam. Don’t climb mill.
Me gusta
What type of wood in this video?
red oak
Yes it looks like oak but it seems to have a figure like curly pattern. Never seem that before. Is this some special wood you bought somewhere?
It's Curly Oak, I bought it on Lumber Yard, but not so much, I was lucky
What router were you using?
Hay đấy tôi cũng muốn có nó
Enqe tienda puedo encontrar ese tipo de cuchillas alguien qe me informe en the home depot no las e visto
Antonio Pereira de donde eres
those look like Yonico bits
Why on earth do you run your fingers over the cutter? First rule day one machine training never put fingers in cutter zone.....
Genti aluguei sabem qt Costa esas brocas
Es roster el que utiliza?
No questions asked
Hola como puedo adquirir esas broacas gracias
Juan Rodriguez de donde eres
How much
Thanks
👍👍👍👍👍👍💯💯💯💯💯👏👏👏👏
EXCELENTE MAESTRO : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - )
bao nhieu tien vay
Có ship ko bạn
dónde puedo conseguir ese tipo de freesa
quanto custa