Quick Engine Removal || Maintenance Work || My Daily Driven Volvo 945
Vložit
- čas přidán 12. 12. 2020
- In this video I do a quick engine removal of the B230FK turbo engine in my daily driven Volvo 945. I decided to remove it for ease of access in order to replace the rear crank seal that is leaking. I think that is also a good thing to do just to give the engine a look over for other problems.
Volvo Commercial: • Video
Disclaimer:
Due to factors beyond the control of BackmansGarage, I cannot guarantee against improper use or unauthorized modifications of this information. BackmansGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BackmansGarage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BackmansGarage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BackmansGarage. - Auta a dopravní prostředky
I hadn't thought to take the wiring harness with the engine, good tip for next time. thanks.
@10:50. Now I know how to get to my oil separator box! Lol
Tack för en välgjord video!
Tack för en bra video och lärorik
Tackar för detta 👍
Endnu en super video...keep em coming :)
Thumbs up fra Danmark 👍
Regarding your PCV system. I checked/cleaned/replaced my system in the spring of '19. This also included removing and checking/cleaning the oil separator box. I was very surprised to see how clean the box was on a B230F engine with 430,000 kilometers. It was virtually as good as new. I guess sometimes you get lucky!
Just got done flushing mine out yesterday, It wasn't that bad, a little condensation goop in the very top of it. But one of the connection hoses was pretty stuffed. 😀
"I don't want to crawl underneath the car so I'm going to just pull the whole engine".
Snygg T-shirt!! Har en likadan här hemma. Jobbar på Lundby. :) Kul att följa dig i garaget.
Great video
Thanks 👍
Thanks for this superb video, really looking forward to swap my own volvo engine 🤠
Great video! Thanks u so much :D
Thanks for watching! 👍
fortsett sånn med kanalen så vil du bli stor!
The most underrated automotive youtuber
Yet another good example. Been looking for any vid content from you swedes in english language sometimes is a pain. It is very very helpful. Seems like the B230 is equivalent to the chevy V8 here in america. As a Volvo owner of many this is the first where I seen a front block off for the radiator as I am thinking this is due to the cold over there. Have not seen this in the states. Is it a factory part? Good job 👏 with the example as I never thought about ease of the wiring harness removal as I always take it from the motor. I'm gona give it a go next time. Thanks for all you do...
The front block off might be a cold wether application, but iam not sure about that one. All I know is that does come stock on this particular model anyways. Thank you for the comment 👍
Great video and great channel! Complete novice thinking of pulling my B230FT on my recently purchased 945 as it needs a refresh and there's no better way to learn than to pull it out. Wondering if you have a manual or specific resource you'd recommend to help me with figuring it all out. I've found lots of useful info on forums/youtube but you tend to have to already know what you're looking for to find it. Keep up the videos!
Thanks, i agree with you there. The best way is just to do it an try to learn from it. No I dont have any specific manual but try to stick with the Volvo greenbooks (orginal sevice manual) I think that the haynes and so on is a bit too general at times.
There is one site that lists a few of the greenbooks, but some of them are in Swedish tho.
www.v8volvo.se/mekartips/volvo/140-240-260/_140-240-260.html
@BackmansGarage Awesome thanks for the info.
Yep, that looked easy! lol
@4:22 I noticed something hat confuses me: Your battery poles are the other way around? Stock, The ground pole is located to the left side of the car, and the +12V pole towards the middle of the car. Did you mount a reverse polarity battery on purpose? (and why?)
Good morning my friend. Watching your video as i prepare yo head to a junkyard to remove 2 940s engines to hopefully put together a solid turbo engine for my 245. Is there anything you could add in relation to lessening the time spent in junkyard? I will be pulling the engine, transmission, driveshaft.
I believe because my 240 is a 92, the hatness from the NA b230 in the car just needs mild modification (and the turbo ecu) as far as i know? Im hoping its that simple
It should be pretty straight forward removing the engine, I would start with the driveshaft and work my way forwards. Regarding the harness I would try to keep as much of the stock b230fk/ft as you can, I can't say how many more wires there are but it's enough that you will save alot of time just pulling out as much of the harness as you can. 👍
@@BackmansGarage I appreciate your follow up so quickly! Have a lovely rest of your day (and great weekend!)
Grym video Backman! Jag har dock ett helsike att separera elpiskans kontaktstycken vid respektive fjäderbenstorn. Är det bara att trycka in flärpen och dra rakt ut? De sitter som berget.
Det kan vara lite ärgat ibland, ibland går det lätt och ibland är det riktigt bökigt. Prova att spraya dom i "blöt" med någon oxidlösare över natten så kanske det hjälper.
I got a 1989 Volvo 240DL, and has no spark. also hade to buy a new E.C.M and still not starting.
vädigt välbehövligt
Is it necessary to remove the trans with engine or can you unbolt it from the bell housing?
No it is not necessary, however the bellhousing is one with the gearbox and i just like to remove everything with such limited space under the car since i am only on jackstands 👍
What trans is that? M47?
That is a Redblock M90 gearbox 👍
När kommer nästa t5 video?
Det blir nog inget mera denna sidan av året, måste få bort alla andra grejjer på dom andra bilarna. Allt gick sönder på en gång.
@@BackmansGarage Aoke, älskar videorna👍🏻
Underhållande och lärorikt. Tack!
Tack själv 👍
Schysst video! Du gör bra content!
Tack! 👍