How to Replace Front ABS Sensor with Harness 00-07 Chevy Suburban
Vložit
- čas přidán 26. 05. 2014
- 1A Auto Shows you how to install, repair, fix, change or replace a bad or broken ABS sensor and harness. This video is applicable to the 00, 01, 02, 03, 04, 05, 06, Chevy Suburban, or Tahoe; or GMC Yukon.
Buy Now!
New ABS Speed Sensor with Harness from 1AAuto.com 1aau.to/ia/1AZWH00044
🔧 List of tools used:
• 18mm Socket 1aau.to/tmG/1AXAA00043
• 22mm Socket 1aau.to/ta/1AXAA00266
• Needle nose pliers 1aau.to/tgu/1AXAA00051
• Needle nose pliers 1aau.to/tgu/1AXAA00052
• T55 Torx Socket
• A Piece of Pipe (for leverage)
• Ratchet 1aau.to/tRc/1AXAA00016
• Torque Wrench 1aau.to/tj6/1AXAA00044
• 5mm Allen Wrench
• Jack Stands 1aau.to/tkB/1AXAA00065
• Large C-Clamp
For More Info visit us at 1aau.to/h/aKS/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Where are the fuss to stop the abm system
I changed my sensor flowed all the steps now my abs and traction control light is on what should I do
Can't thank you guys enough. Asked my mechanic how much to replace sensors. Don't even want to tell you how much he said. It was criminal.
It seems like you guys have fixed EVERYTHING on that suburban, which is great, because I've got two Tahoe's of the same vintage. LOL - Love all your videos.
Just a few extra steps added to a basic brake job.. Very helpful, thanks..
Great video, very informative. I'm having intermittent abs with tc dash light on 04 Malibu. Pulled off both from wheels, harnesses appear intact, no breaks in the line, the connection is clean and solid. Advice appreciated on next step in diagnostic stages have a multimeter but no code reader. Ty
Damn!!! That guy is shaky!!!! Little less coffee in the morn 😳 You guys have the best videos of all!!! Tells ya what tools are required and everything!! 👍🏻
I'm assuming this is the same process for silverado 1500/2500 also? Looks like the same harness I ordered from you guys. Basically just a brake job and do the harness while everything is apart. Thanks for a very informative video. Should we file away any rust buildup around where the wheel speed sensor plugs into?
gracias este video me ayudo mucho ..thanks...
Your videos are simply amazing! Thank you for taking your time to teach us less educated.
+ezskanken A little know-how can go a long way. We're glad the video helped you out. 1aauto.com 866-403-3393
+1A Auto Parts I'm actually using several of your videos today and tomorrow. Your knock sensor replacement, abs wheel speed sensor replacement, and CV shaft replacement. If you have a front airbag sensor replacement video I'd use that to lol! Also trying to chase a vacuum leak, and figure out why my cruise control don't work all of a sudden. Thanks again for these amazing videos!
Watching from France..Trés bien expliquer avec l'image à l'appuie..Thanks A1 is number one
I have to change mine on a 2014 Silverado. Will it be the same process? If not can you make a video. You guys have been very helpful in all my problems
very helpful god bless keep up the good work
Great video, very informative
Thanx so much...you just saved me some money....😎
thanks I wasn't sure ... this helps . Thank you guys and great video
+Joe Hegelin Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/abs-sensor-with-harness/i/1azwh00044?CZcams&CTA+Comment&PeWFZQiK9II
Excellent video. In regards to the sensor after being replaced is there anything that has to be done to the vehicles ECU to get the light on the dashboard to go off or will it go off on its own over time..?👍
If there is noise when making turns in addition the the TC/ABS lights...is it safe to assume the hub bearing should be changed as well?
Do you have instructions on this for the 2013 chevy impala LTZ?
Great Job Don!!!
My abs and brake come on at the same time and I notice the emergency brake on my suburban presses down on its own when I start the truck if replace the abs sensor will that help that problem
You guys are the best 👍🏻
Thanks for the kind words. 1aauto.com 866-403-3393
I was going to put the exact same comment, instead I'll just like and reply to yours.
yes indeed this video helped me out tremendously THANKS AND THANKS AGAIN !!! FRANK
Will these cause your stabilizer trak control and abs light to come on if their no longer any good
What tool.is used to take the wheel sensor off the rear of a 03 yukon denali
Is that the same harness for the wheel speed sensor?
Will a bad sensor cause issues with third and no-shift to fourth?
Thanx for the video
Don had a bit of the shakey hands going on 😄... it's all love
That Allen bolt has 5 sides like mine instead of the normal 6 (hex) bolts. Did you use a standard 5mm Allen (hex)??? I’ve never seen a 5 sided Allen key???
Is there any differences with the 2wd model?
great video
What type of lubricant did you use
Is the abs system the same as a 06 Silverado? Since they are on the same truck frame last I recall
What type lube is that around the sensor?
hi guys, love your videos. saved me numerous times! question: the bolt holding the sensor on the hub is referred to a 5mm allen, however mine takes a five-sided bit. looks like this one does two. was it actually an allen wrench used, or another type of tool? thanks!
+Chris H Thank you for checking us out. We used a socket that contained the appropriate 5 sided bit. 1aauto.com
Ahh. Where do you get that socket? I've been looking for weeks!! :D
What type of lubricant is used for sensor
Don did you used to work at Boston Volvo ?!?!
Do you have to have that gasket on there for sure?
I use the abs scanner n it say code 265 ? I can’t find anything on code 265. Need help
Do you have a video for this on 3rd generation Dodge Ram 1500?
Thx
first class rebuild
My abs is on and speedometer marking way iver actual miles..mechanic said error code indicates 2 front tires and left side rear. Why would it code more than one tire? 99 chevy tahoe 2wd 4 in lift
Saved me $300 some bucks doing it myself.
I tried this last sunday. ^^
The ABS sensor magnetic tip broke inside the hub and seems stuck there. What are the different way to remove it ?
If I push it down the hub, will it stay stuck ?
I sent my module off for my 02 Escalade got it rebuilt. The shop put it back on and bleed the brakes numerous times but now it has no braking pressure at all. I replaced the Master cylinder, brake booster also. Any advice
+Retros 4Life 79Boxing Thanks for checking us out. We would recommend taking this back to the shop and have them see what the issue is, we are unfortunately unable to diagnose problems without having the vehicle with us.
How do you reset the abs light after your replace the sensor?
Five hundred 20s it'll go away
Mine had 6 of the metal seal spacers on it
wondering if this ABS sensor is also considered or commonly known as the wheel speed sensor and will it possibly fix my "traction active" light coming on and causing my wheels to temporarily stop moving for like 2 seconds
+Jay Aguilar They are called the same name.
Does the rotor has play after you remove the tire? I have a suburban 05 and has 2 piston on caliper, one works the other doesn't .should I replace caliper, tried to get it lose but still only one piston works . I brake and steering goes to the right so I know it has to be the same one I'm talking about. The pad I guess it stays lose and makes noise on any little bump. So, should I replace the caliper?
Thank you for watching! When the tires off there is nothing bolting the rotor down so it can have play. If only 1 piston is working then your going to want to replace the caliper.
888-844-3393
I was thinking "geez, if I'm not bending the backing plate to access the 5mm bolt and I'm taking the entire brakes apart, I may as well spend 12 bucks and have the rotors turned and put new pads on as well." Then I see you guys put new rotors and pads on anyway. LOL
If it's not a rusted mess, I cheat and make space between the rotor and backing plate to slip the 5mm socket down there to remove the sensor. But if it's a stubborn mess, you gotta go full monte and disassemble the entire deal.
I did the same but the abs light still on ….what can I do
Both of mine are severed.Would that cause a brake light to come on?Is this the same part number for an 02 4wheel drive Canadian model?
+Richard Coats Thanks for watching! If both of these wires were severed, then that could definitely cause your brake or ABS light to come on. As far as fit goes we recommend you give us a call and we can find the correct part for you! 1aauto.com
Caliper bracket and brakes can come off together by just removing bracket bolts then screwdriver between disk brakes and whole unit will come off
I have 92 Buick roadmaster.will it be same process?
The process may be a little different on your application. We will keep this vehicle in mind for future videos.
1aauto.com 888-844-3393
Hello im having a problem with my 2002 chevy tahoe , the abs light came on for a month now. And sometimes it goes away... now today when i tried to brake , it felt like tge truck wasnt going to stop and the pedal got hard, like tge brakes wanted to lock.... could this be my problem
+Edgar Arriaga You may want to check the master cylinder and also the brake proportioning valve to see if it is working correctly. Hope this helps you out. 1aauto.com
We replaced both front bearings and brakes now the ABS light is on and the TC. Does it cycle through or is there is something we need to do?
+Regina Krieg You may want to make sure that the ABS connections are clean. If they are dirty it may trigger the light.
What about the caliper sencor
Is it necessary to pull the caliper off? Or can you work around it?
+Angela Miske It would be tough to access the sensor without removing the caliper first. 1aauto.com
My 04 Silverado does a buzz when coming to a stop my abs light is also on would this be the problem to be replaced?
+Juan Julian Thanks for watching! There could be multiple issues that would cause this to happen. If you are unsure we recommend getting the vehicle diagnosed by a reputable shop. From there you can identify what needs to be fixed!
I asked about a 2000 HHR L.2liter full harness
Is there another sensor located under the hood near the radiator that would cause my ABS light to come on? 2006 GMC Sierra 4.3
+MR. JF We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com
I habe an awd 03 yukon denLi.is this same thing same abs sensor ?
+THE WANDERER A bad, corroded, frayed, or malfunctioning ABS sensor can cause an ABS light to illuminate on your instrument panel, and store an ABS diagnostic error code. If your ABS sensor or wiring harness is corroded or damaged it will prevent your ABS sensor, and ABS system from working properly. This part 1AZWH00044 is listed to fit your 2003 Yukon. Thanks for watching!
Good video as always...
Im located in Eastern Ontario, Canada...
Do you guys ship here?
+splash Here is a link to this part on our website. We do ship to Canada. The site will also total the shipping cost for you. Hope this helps you out. goo.gl/nP8Qhb
1A Auto Parts
Thanks very much!
How would I know if its the right or left that's defective?
+old school gamer Thanks for watching! On these types of vehicles you will typically get a check engine (or ABS) light on your dash. You just need to use a code reader, and if it is an ABS sensor the code will tell you which side is the problem! 1aauto.com
I bought and replaced a pair of these sensors from 1A Auto. The initial problem I had was that my traction control would engage under normal driving conditions and typically from a dead stop. I found a lot of posts claiming that the cause for this was bad sensors. After replacing both sensors, the original problem has been solved, however now my ABS and service brake system lights are coming on, and the brakes go into anti-lock mode while I'm driving, typically when slowing down or making a left hand turn. Are there rear wheel ABS sensors too? Do I need to reset something once the new sensors are in?
+Steve U You may want to pull all of the codes from the computer to see if there's another issue that's causing this to happen.
+1A Auto Parts OK I paid $94 for a reader. It said the right front speed sensor was bad... but I replaced it. It also gave me a code C0455 Steering Position Sensor Circuit Malfunction.
abs module may be going out
I have 06 envoy I replaced both sensors but the abs and traction control lights come on and off do you have to reset anything to take cods off? also the old had 3 shims on each one does it matter how many are on there I put them all back on and abs break stayed on but no lights took apart and put one spacer on and abs is fine but lights came back on what do you think is going on
@@paulcolonna3686 did you find out what's causing this? I have the same exact issue
I swapped the wheel speed sensor on my 2003 silverado and now i have a ABS light on. Is it possible i got a bad wheel speed sensor? My code scanner doesnt even read ABS codes so i cant clear it
+Frank Bordonaro The most common sign of a faulty wheel speed sensor includes the ABS light coming on but other symptoms include: Traction Control Light On. Stability Control Light On. Transmission Won't Shift Gears.
Why not take the caliper off with the caliper bracket attached??
Will this work for a same year Tahoe
+Aidan Cline The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Does it only have one speed sensor or two?
2
I have a question, i recently bought a 01 gmc sierra ext cab and whenever i press on the brakes it pulses and when im driving it sounds like metal is touching and i just put new rotors and pads, i went to my wheel speed sensor and I followed the wire and they are both cut on both sides, the truck has a 7 inch lift , why would they be cut? Im assuming that the previous owner cut them
They are cut on the wires after the clip , the white and blue ones that are braided together
+Alexander Orozco Thank you for your inquiry! Without being with the vehicle it is difficult to determine the reason for the cut wires. We would suggest taking the vehicle to a reputable mechanic to have it looked at. Please let us know if you have any further questions, thank you!
So i found out that it was in a wreck and the cable was cut, i spliced a new cable in and its working fine now, the brakes dont kick back anymore and it stops fine
will this work on 4x4 also?
It should be the same or a similar process. Thanks for watching. 1aauto.com
So i changed mine and lights still on and im still hearing squeak when i break. What am i doing wrong
Same here
You can reset your light by disconnecting the battery as for break squeal you can lightly sand paper your rotors if you didn't replace when you replaced your pads
Squeaking brakes might be because theres grease on the rotor or even dirt doubt its the abs sensor
Is this the same process with a jeep 98 grand Cherokee? and how much would that run me usually?
+DUKE OF ILLUSION Phil Dé Artist It may be a different procedure on your application. We currently do not have an auto repair video for this particular year, make and model. Thank you for asking. 1aauto.com
I just replaced both abs sensor today but the abs light still on. I already replaced the abs module about 2 years ago it did make the abs light go away. Any suggestions please ?
+Chio Saeteurn We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. It could be the sensors or the module causing the issue. Thanks for checking us out! 1AAuto.com
Check abs fuse, pump, or replace the module again
If is 99-06 full size gm, try cleaning the grounds on the frame under the drivers seat.
I don't understand why so much grease is provided if it is just to lubricate the oring on the sensor.
So I did this on my 06 Silverado and after I was don the ABS light came on. Is this normal and how do I reset it?
+Mike Junk You may check to make sure that the ABS wire didn't get pinched or damaged on anything. You may want to also check the ABS wire connection and maybe clean it to make sure that oil or a contaminate didn't get on it, we have see this trigger an ABS light on occasion. Hope this helps you out. 1aauto.com
Assuming everything else is in order, disconnect the battery for about 10 minutes.
Where does the far end of that wire connect?
Back into speed sensor connection
looks like a pretty easy job and while you're at it if you need to I would say just go ahead and put new brake pads and if your truck's old enough do a little bit of preventive maintenance and replace the caliper hoses as well.
I thought the new sensor comes attached to the hub?
+Super terrific R Thanks for watching! It is true that when you buy a new assembly for this vehicle it comes with the sensor already attached. However they are removable, and this videos shows you how to replacement just the ABS sensor if you need to! Here is a link to the sensor: www.1aauto.com/abs-sensor-with-harness/i/1azwh00044?CZcams&CTA+Comment&PeWFZQiK9II
Replaced sensor and my light still comes on. Any info would be appreciated. Help!
+Ruben Castillo If the sensor was the problem it will clear itself as soon as you start moving and the system runs its testing cycles. That is because the ABS runs testing continuously to detect any faults. If the sensor was not the faulty item the light will stay on.
1A Auto Parts Thanks, for the info.
Do you really need all those spacers with the ABS sensor?
you the best
My mechanic tried telling me I need the whole hub assembly just for this one 25$ part......of course Im going to do it myself.
KillJoy some hubs have it and some doesnt
Often times a bad hub can cause the abs sensor to go bad.
Is this part also known as a SPEED SENSOR?
+DOUGLAS CRABB Thanks for watching! That part shown is an ABS sensor, but is also referred to as a WHEEL speed sensor. There are other speed sensors on the transmission that are referred to as VEHICLE speed sensors. 1aauto.com
1A Auto Parts thank you.
DOUGLAS CRABB Hello! Could this bad sensor be the cause of the traction active message that always comes on resorting in the loss of power to the front wheels when pulling off from a light or stop sign in dry weather?
+PHIA BELGRAVE - Yes, that is exactly what is causing that problem.
This channel is op
This why my Tahoe brake pedal pulsing when
brake to stop
+guil Mondragon Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Why didn't you clean off the base where the sensor sits your the only mechanic that didn't clean the surface, and why did you take the caliper off the way you did unless you were doing shoes too, just wondering.
Is it necessary to grease the sensor?
+Albert Quiroz You dont need to.
👍
He seemed so nervous!
Chevy-Ridah-boi when the crack kicks in
I meant code 267 ? Not 265.
This sensor will be so fused into that hole in real life conditions
How much does it cost to Replace an ABS Sensor ?
+Pat Thanks for watching! We carry a pair of front ABS sensors for this vehicle. Here is a link that will take you to our listing where prices are shown. www.1aauto.com/abs-sensor-with-harness/i/1azwh00044?CZcams&CTA+Comment&PeWFZQiK9II
Thanks for link. How many Hours does it take to Replace it & what's the Labor Cost ? Thanks.
C0226
Don for pres!!!!
Straight up did not torque those to 75 ft lbs lol
What not respectful is rip off the public in car care to get rich quick
Now do it on the ground not on a lift... 99% of people watching this will be doing it on the ground... make that look just as easy
Why do auto repair er rip people off on something you can do yourself cheaper
Your Guy only know change the part. He didn't troubleshooting, and/ or tested the sensor.
+gmazufri That's right, this is just a replacement tutorial. Thanks for watching! 1aauto.com?CZcams&CTA%20Comment&ATony 866-403-3393
Did you just call that clearance shim a bracket ? You should deff not be making any how to videos, since you do not even know how to 😂