Honda CB500X FRONT BRAKE FLUID CHANGE 👨‍🔧---🏍 HINTS AND TIPS

In this video I am going to show you how to CHANGE your FRONT BRAKE FLUID ! With HINTS and TIPS from The Old Mechanic.
TOOLS YOU NEED:
WERA SCREWDRIVER for Phillips Screws: amzn.to/3VqJSXT
Wrench 8mm: amzn.to/3YMkheV
For my playlist of the HONDA CB500X MAINTENANCE CLICK HERE:
• HONDA CB500X maintenance
Motorcycle Maintenance For Beginners - AND What You Need To KnowWith this DO IT YOURSELF video you can save a lot of money.So be sure to watch this WHOLE video, so you don't mis important information.Don't forget to SUBSCRIBE, LIKE and SHARE this video with your all your friends on FaceBook and WhatsApp.
Motorcycle maintenance made easy by: The Old Mechanic

[@FurrySh0ck]

I have some trapped air bubbles in my front brake, thought I should check how to do it myself.
Thank you for explaining how it's done so well!

[@TheOldMechanic]

Your welcome 👍🏻👊🏻

[@ung2002]

Thanks a lot master The Old Mechanic for all your vdos. Love then all. 🎉🎉🎉🙏🙏🙏

[@TheOldMechanic]

You are very welcome Theno 👊🏻👍🏻

[@northernowl7087]

I have a XADV with ABS I’m a bit nervous about changing fluid because of the ABS pump you made this look easy.thanks for taken the time to make these videos.🇬🇧🇬🇧

[@TheOldMechanic]

Thanks mate 👊🏻👍🏻🏍

[@DOUBLEAFRONTLINE]

Thank u so much ...this video is so good ،😁😁

[@TheOldMechanic]

Thanks Abdel !

[@randyburgos]

Excellent as always Sir. Thank you.
Randy.

[@TheOldMechanic]

👍🏻👊🏻🏍

[@hanneswinkelmans1774]

Prachtige video's! Ik hou van de rustige stijl. Ik heb zelf 2 jaar geleden een Honda CB 500 x gekocht en wil geleidelijk aan meer en meer onderhoud zelf doen. Deze video's zijn superhandig. De olie en filter heb ik net zelf vervangen. De remvloeistof voor en achter is mijn volgende project.

[@TheOldMechanic]

Top Hannes

[@richardfews2113]

Hi,Richard from Bristol UK here again.Do you have any tips on how to keep the break pad vibration spring which sits in the top of the rear caliper in place when changing the break pads.The job is so simple but I find the spring constantly drops out adding hours( and alot of bad language )to an easy job.The ledges inside the caliper seem useless .A friend of mine suggested adding extremely small spots if red rubber grease.Thanks Richard

[@denismarques2002]

Ótimo vídeo, aprendi muito. Obrigado.

[@TheOldMechanic]

Your welcome

[@randyburgos]

Hello Old Mac. Yes I have the right parts so the dealer says but the same problem. I will take it to the local motorcycle mechanic today. I did change the seals in the brake caliper and the same problem. I will let you know what the problem is when they find it. On my way now. Thank you.
Randy

[@TheOldMechanic]

Hi Randy, i am curious what the problem is. Please keep me updated mate. 👍🏻👊🏻🏍

[@emilslobodsky6906]

Thanks you.❤

[@TheOldMechanic]

You're welcome 😊

[@licici]

Sir, can show how you do that open/close at the caliper section while pulling the lever?

[@gregholliday1674]

Would have liked to have had a camera view as to what was happening at the bleed end too.

[@TheOldMechanic]

Next time I will do that 😉👊🏻👍🏻

[@walterverheyen1263]

Ik gebruik een spuit. Die troggel ik af van drugsgebruikers onder de brug. Heb ik het eigenlijk mee gehad. Ik zou graag weten waar je dergelijke flesjes met teutje kan bemachtigen. Dat van die drugsgebruikers is misschien niet helemaal correct.

[@reljoy]

What do you do with the old brake fluid?

[@daddyteddy.official]

its it only on the front break? Or I need this on my back break? or is the Back break without a fluid?