FREE YANMAR DIESEL ENGINE SAVED FROM THE SCRAP YARD...WILL IT RUN?
Vložit
- čas přidán 13. 02. 2024
- IN THIS VIDEO WE SAVE A TWIN CYLINDER YANMAR 2TNV70 DIESEL ENGINE AND A PEERLESS HYDROSTATIC TRANSAXLE FROM A SCRAPYARD THAT WAS GOING TO BE CRUSHED AND MELTED DOWN. THIS ENGINE IS THE SAME ENGINE THAT IS IN MY IHI MINI EXCAVATOR AND THE TRANSAXLE IS THE SAME THAT IS IN MY STIENER 430 MAX TRACTOR!! I GOT BOTH OF THESE FOR BASICALLY FREE, JUST TRADED SOME SCRAP METAL FOR THEM, WHAT A SCORE!!
Buy me a coffee if you enjoyed this video and want to help support the channel 🙂: www.buymeacoffee.com/albericidav
MY EMAIL---- ALBERICI.DARRELL@GMAIL.COM
Link to the fuel line I use- www.ebay.com/itm/132451641452...
AstroAI Car Jump Starter, 2000A
Product Link：Amazon：bit.ly/45TyJ7f Website：bit.ly/3S3UZqe #AstroAI #jumpstarter #astroaijumpstarter - Auta a dopravní prostředky
Its crazy what people throw away nowadays!! There is a lot of life left in this engine! With A fresh paint job it will be perfect to repower somthing..There was other tractor related stuff in the pile as well maybe I should have went through it all better 🤷. Thanks for watching guys!!
Are we going to get 4k???
@@enduser1982 4K video?
@@TheHomePros6221 yeh as in 2160p??
It's currently 1080p!
Quality is quality and you should want your work shown in it's best quality.
Good stuff
@@TheHomePros6221Subscribed as I'm 71 years old and love to 'Pickup ' throne away engines at Scrap yards.
Apparently there are a lot of either Rich Dumbasses or plainly STUPID people out there but my thanks goes out to all of them.
Picked up similar situation on a Diesel Light Truck engine and spent ZERO but new oil & filters on it , put in the truck and stil driving it.
You are my hero! My wife hates when I take stuff to the scrap yard because I usually come back with more than I left with...
Hahah I’m the same way lol esp at this private run scrap yard I just started going to, there’s lots of cool stuff there
Ten four every thing nice when ur poor
Or its was just a good trade.
Going to the dump is like going to the bank ---- make a deposit, make a withdrawal.
WOW! And to think they were gonna melt that down.
Yanmar makes one helluva motor.
They sure do!! I think they are the best along with deutz and then prob kubota
@@TheHomePros6221 IMO, the toughest engine ever made is a two stroke detroit, followed by Ford's tractor engines and an 855 cummins. Kubota and Yanmar are certainly the best in the sub 30 horse market.
Have you ever seen the small (sub 20hp) Lister or Petter diesels?
@@3sparewashers-lg3gf
Nice!
I love getting old engines back up and running!
Yes sir it’s a great feeling!
Another treasure from your favorite place, the junkyard. This just shows what a great benefit it is to know how things work and how to fix them. A very nice engine for free. Such fun to watch.
Glad you enjoyed it!!😊
Just love your little pup too! I had a little guy just like him, he was a rescue and I just adored him. 😢
Aww thank you!! He’s my best lil pal
Gotta look at the bright side you might have sprayed oil everywhere but you won't have to worry about the skeeters in the spring.🍻
Hahaha
Can't beat that. Love it when you find something useful in a scrapyard.
You got that right!
Brilliant video. It's always a great feeling when you find a small engine and you can get it running
It sure is!😊😊
Wow! I'm impressed how easily that little diesel started after you got fuel to it.😄 I didn't realize how tiny it is, until I saw your hands around the intake and such, yet they're rated at 14.1 hp.?! That would be nice to repurpose into an old riding mower or a boat of some sort!😉 I don't imagine the fuel shut off solenoid would be terribly expensive?
You and me both!! It started rite up!! It’s only two cylinders but this thing has a ton of torque and it is very heavy I hurt my back trying to lift it with another guy I’m guessing it’s around 250-300 pounds?
This would be nice for a generator. You could change the ratio on the pulleys so the motor runs at low speed. Diesels make lots of torque at low rpm, so 1200 rpm would be good as long as your generator is making the appropriate voltage. These little diesels just sip the fuel. Nice motor.
Lol I just LOVE watching your videos!!! You are a Great Mechanic!! So much respect! ❤❤
Thank you so much 🤗 that means a lot!!
SAVED means it will run!
I Love how you clean it first most guys are scared. Thanks
Also looked like shaft was bent.
Thanks 👍 the shaft is straight someone welded some goofy pulley contraption to it
Maybe that motor spent a little time upside down? Just a guess. As always, well worth the wait for one of your vids!!! Thanks for sharing bro!!!
Yes I think so as well. Thank you very much my friend!!
That's really awesome Darrell. Great finds. Also a great video. Thanks for bringing us along. Can't wait to see what is next. I never miss one of your awesome videos.
That means so much jeff!! I truly appreciate viewers like you!! I wouldn’t be making these videos as they take a ton of work, without support from viewers such as yourself! I have a good buisness (the home pros) fixing up houses but I have pretty much stopped doing that to make this my full time job
@@TheHomePros6221 I am so happy to hear you say that because I always thought that you could make a career out of making videos. You are so awesome at fixing things that most people , including me, would just throw away. That's why I love your channel so much. You seam so intelligent for such a young man. I wish all the best for you and hope to see a ton of videos from you. I freaking love them. Keep going my friend.
Mr Home Pro, really glad you saved that engine from the furnace , where as the scrap metal,not much use is now being recycled into something of use , WIN,WIN outcome. Great work, regards Rob.
thank you so much rob
That was awesome. You have skills my friend.
Thank you very much!
As always great work. Always look forward to your videos.
I appreciate that thank you my friend!
ในประเทศไทย เรานิยมใช้กันมาก โดยเฉพาะทางภาคใต้ เกาะภูเก็ต หลีเป๊ะ กระบี่ ใช้เครื่องยันมาร์3 สูบ เพราะดูแลรักษาง่าย ไม่จุกจิก แถมทนอีกต่างหาก😊
💗it. No need to put it back in the scrapyard.
Why would anyone throw it away in the first place?? 🤷
Nice pick! Got a winner. 👍
I can’t beleive someone threw this thing out!!
Tie the engine down onto some 4x2 or larger timber beams........
Always secure fuel line before starting engines.
Always turn over "new" engines by hand before applying an electric starter...
gotcha I pretty much did all that 😊
I wish I was your friend to pass tools refreshments n jokes would learn so much . Great work chief from Portugal
Maybe one day!
When I saw your Silverado, I did a double take...yours looks mint....mine is rusty and crusty. Kind Regards. Craig
It’s been a very good truck!! No rust at all😊
when suspecting a flooded cylinder (oil or coolant),I remove valve cover and over tighten intake and exhaust valve valve adjusters by .010-.120 them crank the liqud can now escape. Reset to proper clearance prior to start attempt.
Great tip!
Nice presentation!
As a new video creator, I understand the amount of effort these videos require!
Thank you very much! it sure does!!
Yanmar put these engines in EVERYTHING. Seriously.
My family owns a John Deere 650, bought in the 80's, that has one of these. Not the most powerful, but has survived for many, many years cutting multiple acres of land at full throttle. Just can't kill these things.
u got that Roy they are tough lil buggers
Good fines Darrell, amazing what people throw away.
sure is my friend!
Always look forward to your uploads brother. Looks like you have an excellent transplant for other projects. What a smooth runner with a little cleaning up. It was spotless under the valve cover. Hope things are good your way!!!
Thank you very much Alex!! I always like watching your videos as well I hope you do a video or a short opening up that kawasaki engine to see the carnage 😁 thanks for watching brother!!
@@TheHomePros6221 thank you. I’ll be doing a full video on the tear down and hopefully rebuild.
good job man. You are a fantastic engineer
Oh and you are very much as well my friend!!
Was told long ago to put your fingers in em to turn em on ! Boy were they wrong ! Thanks Darrell !
Love watching you work on stuff!
I appreciate that!
i enjoy watching you videos glad you got the old diesel engine running and i like you little puppy too glad you was able to put that on youtube job will done
aw thank you! he’s my lil pal he goes pretty much everywere I go 😊
Man!! You can’t beat that brother!! That’s PHENOMENAL!! I bet to replace that engine it would run you at the very least a couple or 2 to $ 3000 wouldn’t you think so? Also you possess some very competent/skillful and or valuable content! I among others greatly appreciate you!!
Thank you so much brother I truly appreciate that.. means a lot 🙂
Thank you for sharing, I learn a lot 👍👍👍👍
Glad to hear that
Nothing better than free stuff to make work again! You made a great haul alos with the transaxle,
You got that right! thank you!
What a great find.
Thank you! I think so as well
Get a hydraulic pump to match between those two, with a proportioning valve, and then you're just a go-cart chassis away from a yard run-about.
Yes that would be sweet!
So good to see you back making videos like what you do
I appreciate that! I try it just takes along time to make some of these videos I have like 3 projects I’m recording now just finished one but the editing takes forever
Way cool, seeing you save that motor!
thank you brother
One of thee best motors…. Wish they’d come up with a 6 cylinder or a V-8 for a Truck.
me too
Subscribed. This engine seems to have been scraped possibly due to an operator error that trashed the donating machine as the core of this engine seems to be almost pristine. What an awesome find. I am converting everything to diesel and collect them whenever I can.
Thank you so much!! Considering all the other stuff that was in the same pile it looked like someone Mayr have cleaned out a old shed maybe cause they bought some property and all this stuff was left in it
Great video, waiting on the next one, thanks and keep them comin.
Thanks, will do!
Generator head making full power just above idle. Running on 50/50 veg preheated fuel with a glow in the line on a pop switch oh yeah.
Sounds good
Love your videos i have an old yazoo 76” and can’t find blades and a ransoms 60” 3 wheeler both with old kohler 25 hp both still run wanting to recon them. I will keep watching you until you work on one like those😂👍
Did you see the ransomes videos I put out?
If you plan on storing that engine take the injectors out and put some oil into the cylinders and plug all open spots on the engine so you don't get mouse 🐁 getting in and peeing in it that will destroy that good engine the oil in the cylinders will keep it from locking up if your in the cold climate you will need to drain out the block there should be drain plugs. That's cool you found a good engine and a rear end in the strap yard 👍 for even trade you can't go wrong with that 👍. I would put gear lube or even oil in that rear end so it doesn't rust the inside and all the gears that's so cool that both are in good shape.
Me and you think very much alike 👍😊
Man i love your videos. Wish i had to the time and space to have cool projects like you so for now i live through your videos. Wish you would post more and more lol
I appreciate that! I want to put more vids out as well but it takes a ton of work and time to make these videos 😩
good runaway vid cannidate
it almost ran on the oil that was in the cylinder but it hydrolocked instead but it did puff out some smoke, however it’s kinda hard for a non turbo engine to run away
Well Done Sir! So Interesting to watch!
Glad you enjoyed it!
What a great Engine you have found, its run's realy good . Thanks for your video ... Regards from Holland 🇳🇱.
Thank you very much!
Great find.
😊👍
Nice, i just stumbled across this video, thought for a moment it was a Mustie1 video, what a great save, thats a really handy little Engine
hahaha thank you very much my friend!!😊😊
Boy, you’ve got a way with engines! Very impressive!
thank you!!
i live in a smaller city,but direct on the Coastline.So,i have found 2 old Boats,with working Engines.LATER,you found me far out on the Ocean if all Hell breaks out. my Suvival Empire.With Wood and a Woodgasgenerator can i drive both Engines(so i need Diesel,or WOOD ;-) lots of fish arround me make the living much easyer.
That’s the life 😊
right,thats life. here is it relativly easy to pick up old Boats. and there are somany right along the Coastline,som have sunk over the last years,but no one cares.ALL FOR FREE. The Coastguards here have a Card som mark all known sunken small Boats and there are happy to give it to me. And lift them is not the bi g Problem at all,solong you can put Airballons in and lift them little bit,can your drag them to a better place and work on it. alone her are over 200 know small Boats with Dieselengine or Outboard Engine. it,s a hidden Goldmine down there. @@TheHomePros6221
runs clean
no smoke :)
yes sir
Far as I’m concerned you made a couple thousand bucks that day. Good job man I have a three cylinder Janmar in my little John Deere. It was made in 1986 and it has over $4500 on it. I use Amsoil and I use a superior filtration system also anyway, I can go out there 1520° weather just hit the key and it pops right off
Oh wow! They are made to last👍
I meant to say 4500 hours on my little engine and anyway believe it or not I do between 901,000 hour oil changes but I change my oil filters bought every 200 hours 250 maybe the first filter is be like the frame PHA only it’s a Donaldson filterand my second filter is bigger than that and it filters down to 2 µm. It’s a bypass filter I can go out there in a dead winter time and that thing don’t roll over three or four times and it starts no ether hit the key and go.
Love your channel
Love my viewers! ❤️
What a fascinating little engine! I'm thinking one that small would be interesting in a motorcycle.
Sure would but would need a transmission
If I had to guess I would say someone collected all these parts for a project or various projects. Then for whatever reason someone else scrapped them. I would love to have both of those items, especially the yanmar to re-power my simplicity 4040 tractor. We can’t get things out of the piles at our local scrapyard like we used to years ago. They got real pissy the last time I even picked up a couple of Honda engines. Deducted 100 pounds off my scrap for them. But within 45 minutes, I had both of them running, and sold that day.
Dang yea a lot of yards are like that, I got these from a more privately owned yard and I’ve done buisness in the part with them, I really wish I had gotten it on video there is soo much cool stuff out there like old tractors,engines, forklifts boomlift that has sitting out there for years, a lot is really far gone but a lot is fixable
@@TheHomePros6221 there used to be an old-school scrapyard down by the Missouri Arkansas line. On one side was the scrapyard and on the other side was 20 acres of stuff. The owner thought was too good/old to scrap. I always wanted to go down there with an empty trailer and a pocket full of cash. Never made it though and if I remember right it all got “cleaned out”.
I had a Yanmar 2gm in one of my sailboats - reliable and bullet proof….
they are awesome
Great find and great video
my hero
Hahahahaha😂
Another famous face showing up! Love both your channels
I'd like to see a video with one of these engines with a nos kit or on a go cart
Hahah now wouldn’t that be cool! These Diesels aren’t that fast though so we would need a turbo and a good transmission
Nice find😊
Thanks 👍
Nice content again 👌👍
Glad you think so! Thank you very much!
I really like your videos. Problem is, you gotta post them. You post them, I'll watch them. Thanks for sharing with us.
thank you my friend, I’m trying some of these vids take a long time to make
Great job and find there mate.
Thank u
You might want to make sure both injectors are functioning properly. When you accelerated the engine it sounded like at one point your engine ran different. You could use a infrared meter to make sure both are running the same temp.
I really really need an infrared thermometer!! but it seems like the engine runs perfect
Awesome find and save
😊
it dont need no muffler! run it as is!
Great find, Darrell..😊👍
But I hope you never have to change the engine in that excavator....they have certainly shoe horned the engine in there, and have left zero room for manoeuvre...man, it looksa tight fit!
Great video as always, buddy....looking forward to the next one...😊👍
thank you Dave! it sure is tight but if you remove the counter weight it shouldn’t be that bad 🤷 thanks for watching
Tygon is the best line I have found also. Made in Ohio near me.
I think so as well cause ethanol destroys other hoses
I worked at a scrap yard for a while. If you needed something it was just a matter of time and it would show up. I think a lot of it is because grandpa past away and some of it was just 2 "sticky" but 99% was some 16-25 year old trying not to have a job
Lol
What a great find and fix well done. 👍👏👏🚜👏👏👍
Thanks 👍
Excellent save
Glad you like it
That runs great!!
sure does
I think it’d be really cool if you made a turbo diesel go kart with that engine
Oh yeaaa
MM77 Approved 👍🏻👍🏻………………………………………🤔hummmmm………… can he fix a scrapped Yanmar engine……….. YEP!!!!!! LOL
hahah 😊😊 thanks again for watching my friend!!
Good buy! 👌👍
good free buy 😊
Well done 👏 👍
20:47 -- ох, то самое чувство, когда техника запускается, словно оживает!
What lucky finds!
sure was
That engine looked like it ate some bad Taco Bell😉
hahaha
Nice score!
Thanks!
thanks for video
Most welcome
An old John Wayne movie "Chisum" Pat Garrett tells William Bonney, he has the Patients of an oyster, I believe the same could be said about you
😊
You need a concrete pad to work on, so you can wash stuff, without making mud and have a cleaner place to work on. Is that concrete @ 4:58?
Oh how I would love that!! I have plans on building a nice shop with concrete and all
That's nice it crazy what gets tossed. I'm looking for something to put in Suzuki samurai.
I love those things!
Man!! What a find
I kno rite!
You Haft to Put a small Turbo on that., double the Output Power, Make a little dozer.
I have been seriously considering this!! I actually should have added one in this video!
Awesome job bro
Thanks for the visit😊
nice find.
thanks
nice use it in a boat
It would be perfect for that
Great score
thank you!
Great motor for a generator
Yes sir
That engine would make an awesome motorbike engine.
Sure would!
Great video Darrell, I am always amazed at your ingenuity and the manner in which you continuously get things working. I know that you have your business to run but I honestly wish that you would post more videos. Thanks so much.
Thank you so much William!! Very much appreciated!! I’m trying to put more vids out it just takes a lot of time and money but I’m trying to do CZcams full time I just need a bigger shop with a concrete floor 😊
Nice 13.3hp
This would be great for a homemade rail cart.
That would be cool!
Bro, you should try the gloves i use, the blue ones maxidex , they are very useful on wet and oily mechanics, if you can find them, you should try😉
Thank you I’ll def check em out!!🙂
Hard to believe your good luck find a good running engine in the scrap yard.
I know rite!
Diesels last forever thumbs up