Great to see another video - always pleased when one pops up 😁 It's amazing how some people abuse boards and IC's 😔 I must admit I'm not familiar with this game but it looks exactly like Scramble with a helicopter sprite instead of a rocket! No problem with the easy fix and short video. Looking forward to the next one 👍
Great to get another video. I just love how clearly you got through your repairs. Interestingly I have a bootleg Frogger that is doing something very similar - and it had been working just fine. So I'm wondering if I re-seat all my removable chips it may also do the job! Looking forward to the next one!
Nice job. Is it me though or does the socket using the repaired chip have a lot of corrosion. Those type of sockets seem to corrode much more than others for some reason. I've seen arcadejason (An Arcade Repair CZcamsr) replace them alot. He just pulls up the top plastic part of the socket and desolders the remaining pins stuck in the board. Dunno if I'd try that method myself, but it seems to work just fine.
Yes very good... if the issues would be reoccuring with the board the next thing I would do is replace all the sockets on the pcb. It is a bit of work but it is the way to go if you got recurrent problems with the contacts. Some other repairmen actually replace all sockets of any board before they even try or check anything else. I normally don't do that - only when the sockets and contacts are clearly done for.
A straight forward repair is always a good day. 👍
Thank you!
Great to see another video - always pleased when one pops up 😁 It's amazing how some people abuse boards and IC's 😔 I must admit I'm not familiar with this game but it looks exactly like Scramble with a helicopter sprite instead of a rocket! No problem with the easy fix and short video. Looking forward to the next one 👍
Yes, it is supposed to be a successor to scramble I think.
Thank you for uploading these videos, they help a lot.
You are welcome!
Excellent =D Looks like a follow up to Scramble!
Yes it is I think the successor. ;-)
Great to get another video. I just love how clearly you got through your repairs. Interestingly I have a bootleg Frogger that is doing something very similar - and it had been working just fine. So I'm wondering if I re-seat all my removable chips it may also do the job! Looking forward to the next one!
Yes maybe that or maybe if some sockets are corroded they might need to be replaced.
Nice repair doktorzett, it's always a good day when it's an easy one. I've subscribed to your channel.
Thank you!
@@christophzett how can i contact you? I am from Germany , it’s concerning a daytona
I lost a lot of coins on Super Cobra! :D
Sounds of this game made by POKEY is more advanced than standard Atari computers ;)
Good job!
Yep, great game! Thank you!
doctorzett your back!
Yes and here to stay! ;-)
easy job. Excellent
Thank you!
Sehr gut. Geiles Spiel!
Bestes Game... leider verrecke ich schon immer in Level 2 (von 10). lol
nice job
thank you!!! btw: regarding your breakout... I'm afriad there would be import and export taxes if you did send it to me right?
@@christophzett
i already know that .
i just want to know if it possible.
i will check the cost of all the procedure.
and tell you.
thanks anyway
Nice job. Is it me though or does the socket using the repaired chip have a lot of corrosion. Those type of sockets seem to corrode much more than others for some reason. I've seen arcadejason (An Arcade Repair CZcamsr) replace them alot. He just pulls up the top plastic part of the socket and desolders the remaining pins stuck in the board. Dunno if I'd try that method myself, but it seems to work just fine.
Yes very good... if the issues would be reoccuring with the board the next thing I would do is replace all the sockets on the pcb. It is a bit of work but it is the way to go if you got recurrent problems with the contacts. Some other repairmen actually replace all sockets of any board before they even try or check anything else. I normally don't do that - only when the sockets and contacts are clearly done for.
Hi @doktorzett how can I contact you? I am in Germany and want to Ask you about a daytona pcb ?
Yes you sure can. I'm hesitant to post my address here to be honest. Can you somehow contact me through the youtube platform?!
@@christophzett no unfortunately not … Facebook ?
Too short…….another video please
... coming soon ;-)
@@christophzett is it soon yet?
@@christophzett Wir brauchen ein weiteres Video!!