It’s a hot phrase right now, but it kinda felt like he just tried to force it in there. It wasn’t like he couldn’t find a hole for a bolt and someone say “put some hair on it”.
Get "workbench" Wyatt a 3d printer. Now he is modelling in fusion he will have an easy time modelling simple 3d prints. Very useful tool for making things that fit in with a dash for a street car, button and switch mounts, enclosures for electronics. Can print a replacement part for hard to find plastics in older cars. Plenty of 3d printer manufacturers that like to send free printers to smaller youtube channels. I reckon you could shmooze one.
I get the look in my nightmares even. Then I wake up and it's right in front of me. 😮 It sorta looked like she just didn't want to interrupt the video.
Day 281 bring back the Honda prelude and dude I miss your videos and I hope everyone in the comments have a amazing day . And if y’all are having a bad day remember think positive and keep moving forward because life is going be better
this channel has been around long before them, but yeah their content is similar to Kyle's/boostedboi's - but they differ by building anything that isn't a car.
So happy to see you guys put a manual back in this thing it would be awesome if you guys could get the four-wheel drive system reinstalled just make this thing as Factory looking as possible with an overpowered rotary engine that would be sick
That transmission mount needs rubber isolation. Either that, or the engine needs solid mounts. You will likely break the tailshaft housing if you don't.
Like this if I should post more
Do it on your own time man. If you force it you'll eventually end up not loving it like you used to. 🤷♂️
I'm not sure what everyone is on about your last vid before this one was 6 days ago.
Y not 🎉
nice to see you giving your gas cars attention
Please brother post as much as possible. Film even if you don't post it atleast you'll have some type of content.
Wyatt starts messing with rotaries and then cuts his hair like a Puerto Rican...😂😂
I'm pretty sure he drunk shaves
For real 😂. I was about to say type that. He has a hair cut of mi gente boriqua 🇵🇷.
To Funny LOL
😂😂😂😂😂😂😂😂
Ole 7 head 🤣😭😂
Kyle’s girl looked mad and annoyed and instantly cut to the next day working on the side cut 😂😂😂😂
i'm so glad I read this comment before it happened in the video so I could look out for it 😂
Damn everybody coming after Wyatt's haircut 😂yall dumb
When the genetic mullet is a given, a man has to make a choice.
Shout out to Kyle for reading the comments and listening to the fans.
He didn't interrupt Wyatt at all and let him finish a sentence.
Thanks Kyle.
Most of us are here bc we're Kyle fans. He's the one I want to hear talk.
hes not like the other bosses or anything he doesnt over talk his freinds he been that way for a long time
@@TheGrahamReaper21 So you want him to be rude?
Good job working the "Hawk Tuah" in Kyle lol
Up to date on his memes I see
It’s a hot phrase right now, but it kinda felt like he just tried to force it in there. It wasn’t like he couldn’t find a hole for a bolt and someone say “put some hair on it”.
Someone hawk-tuah'd wyatts hairline
@@donaldchapman4312 There is somebody out there with the last name of Tuah who is not happy about naming his baby boy "Hawk."
@@ronjones-6977 That would be unfortunate.
Get "workbench" Wyatt a 3d printer. Now he is modelling in fusion he will have an easy time modelling simple 3d prints. Very useful tool for making things that fit in with a dash for a street car, button and switch mounts, enclosures for electronics. Can print a replacement part for hard to find plastics in older cars.
Plenty of 3d printer manufacturers that like to send free printers to smaller youtube channels. I reckon you could shmooze one.
Carbon X1 ftw
His girl standing there with food looking pissed 😂
🤣. Glad I wasn’t the only one who clocked that. She gave that look we all know well 🤣
I get the look in my nightmares even. Then I wake up and it's right in front of me. 😮
It sorta looked like she just didn't want to interrupt the video.
@@Coldfin9er😂
Wyatt out here lookin like brain from pinky and the brain 😂😂
"gonna take over the world!"
@@jeremylynn8631 🤣🤣
Wyatt looks like he is rocking a toupee
2 bolts on the shifter my guy 😂
Damn, Wyatt got the wrap around forehead 😂
😂😂😂
Hes got the morty cut
Yea time to call it on the hair
It's a head wrap. 😂 Getting ready for a full on MULLETT. He'll YEAH BROTHER
They need a keeps sponsorship,and that's a 5head not a forehead!
18:30 Cjs in the garage in the background
Working on the civic
glad my eyes are still working thought i was seeing things.
Probably helping them figure out the tube chassis civic.
@@sjv6598yea most likely they needed some help.
If Cj’s on the build then it’s finna be a badass build
Witt got the Edgar cut
water, more sugar!
They definitely need that Keeps sponsorship.Maybe that is what they are going for.....
Si kema cuh
@@bobaque70yea cuz Cleetus really benefited from the keeps sponsor
@@pharmztkolol....I mean, it hasn't gotten worse.....
Holy shit, I thought they were dead at this point 😂😂😂
Wym?? I need context lol
@Anthony-cl5ms they've slowed down on content for a bit now.
life happens man. Fuck i hate my life lol
Glad to see someone commented lol, they must have been running low on funds and were like holly shi😮rt quick bust out another video 😂
The last vid was less than a week ago you just need to turn notifications on
Dam, He got that WOULD YOU LOOK AT THAT Haircut!!
hold my beer special 😭🤣😂💯
@18:25 ... Is that @CJRaceCars in the background?!
sure is, just commented the same thing
It is, he and Wyatt appear to be looking over the RWD civic
So I wasn't seeing things 😂 Kyle did refer to the civic as a promod recently so they getting advice from a pro builder maybe
Man I got on here to comment the same thing 😂
That moment at the end spotting Cameron Johnson giving Wyatt some advice on the tube chassis Civic!
Heck yeah ,auto did it's job, time for manuel to take over ,man you guy know how to have fun.... thanks for taking us along..
..
Did Wyatt lose a bet with that haircut?
Nice to see Wyatt using every bit of that keeps subscription 😂
Kyle and Wyatt, y'all rock! Peace
I love the fact that suzie is a manual again
All these comments about wyatts hair man wtf, imagine having so little respect for people you put them on blast for something so mundane
Day 281 bring back the Honda prelude and dude I miss your videos and I hope everyone in the comments have a amazing day . And if y’all are having a bad day remember think positive and keep moving forward because life is going be better
I hope you have a amazing day too
Please post more we love it and you haven’t got so big that it’s more personal. Like one one one stuff is great.
Lol, every reciprocating saw = "sawsawe." Even the milwaukee sawzall
I remember everyone of those vids.... Man brings back memories....keep it going brotha,..all 3 of y'all are puttin in WORK....let's Fing Go.....
I absolutely loved the flashback bloopers and work after keep up the amazing work!!
Wyatt will be known as "The Plazma Man" now. LOL 😅😅😅
Having no social media and only watching you here on CZcams. I did not realize Suzi did much.
It didn’t.
Always amazes me how big the flywheel seems compared to the dorito box
i needed a video today. thanks for coming thru.
Shalley slinking through the background like usual. 😂
That edit was fire 🔥
Nice to see the sidekick up and going
im sorry but is wyatt wearing a fucking wig from the anchorman movie? that looks so incredibly funny hahahaha i love it
Missed y’all 😊
So psyched for fresh sidekick content.
Been like a hole year glad it’s still kicking
Love a boosted boiz video!!
A J-Series and my adapter would make the sidekick have some torque again to town to boat to the lake. Just let me know!
Love the energy ..positivety..
Be nice to see rotary rebuild
Have great day
You guys are awesome keep up the good work
This channel is like grind hard plumbing. Awsome builds and testing.
this channel has been around long before them, but yeah their content is similar to Kyle's/boostedboi's - but they differ by building anything that isn't a car.
Cool saves as always
The plasma table was a game changer in the quality of your work!
@BoostedBoiz you should be the first channel to do FAN callouts! I have a built K24 N/A Rsx, I'd race the porche or yalls Rotary!
You signed my FuelTech Ft450 & cleetus & cars!
Wrenching on the fleet. Hell yeah boys!
Hi men greetings from Argentina! I like that sidekick!
I’m so happy you put a hawk tua in there
I'm always Jones-ing for new videos! The stoke is real!
Wyatts haircut is badass
Alright.this made my day
That trans mount is quality work that table is paying its self off face
What’s “face” you pinecone?
I like the throw back footage of suzzi !!!
What’s this!?!? Content. The Boiz are back in town
Two bolts in the shifter is plenty! The real boostedboiz fasion🤘🏻
Cant wait to see it done!! 😎✌🏻
Wyatt’s haircut makes it look as if his hair slid back on his head! 😭
17:05 high class videography
Hawk Tuah is literally everywhere, I can't get away from it lol
Perfect time for Australia 🇦🇺
Been waiting on a boosted video for at least a month🤣
Doing a one two punch on the sidekick nice job guys.....💯🙂👍🙏🏁
In all honesty torque specs on engine building is about the only ones I actually use a t-wrench on. Also brakes & lug nuts when time allows.
Great video.
Hell yeah thanks for the vid
Kyle accepts the challenge by repeatedly saying "clearanced out"
Meow what is so funny meow
YES! A rotary need a manual transmission so it can sit on the limiter like Cleetus. 🇺🇸🏁
Cleetus*
*George* Put it on the chip!
@@Grimm-Gaming thanks for being the spelling police nerd.
@@Just_Modify no problem. R33dbog
@r32bdog ps im only joking around. N if u have an r32 irl. How u liking it?
Hell yeah! Miss that 3rd gear!
So happy to see you guys put a manual back in this thing it would be awesome if you guys could get the four-wheel drive system reinstalled just make this thing as Factory looking as possible with an overpowered rotary engine that would be sick
Dont give yourself to many projects😂 love the videos ❤
Keep this videos up
You boyz have come along way since Wyatt was living in the lil tin shed 😅 Sidekick is looking epic and ready for a new chapter in her life / destiny
I love that plasma cutter brother
We were starting to think the Boiz had been boosted
Manual is the way, lesgoooooo!!!
Gotta say, I wasn't ready for that Hawk Tuah. Nearly spit my damn tea out.
Nice I hope to see this side kick lowered that's how they look best 👌🏻
Work bench witet is branding genius!! Capitalize Boyz!!
You guys are impressive
So glad the manual is back, since they did the build originally I hated the auto trans 😂
I see you picked the furniture cart as the Harbor Freight free gift. I did as well.
Love this vehicle, I made my buddy put his turbo back on his 63 vw bug with a rotary stuffed in. It’s so awesome and surprises everyone.
Hello from svn tuning south africa
That transmission mount needs rubber isolation. Either that, or the engine needs solid mounts. You will likely break the tailshaft housing if you don't.
🤣🤣🤣 Kyle with the two bolts on the shifter again!! 😁
An air hammer dose wonders when trying to make room. If you use the right head and take your time it can come out really clean.
A rotory side kick was a tenage dream of mine
Oh no, that far from 400 lbs. I hope it stays together
He said Hawk Tuah! 😂😂😂
Nice meme, bro! xD
🥴
You can make that thing awd so easy. It would be cool to see!
Damn...Wyatts haircut be wild😂
Work bench Wyatt 😂😂😂 I dig it
The Flame Machine is Back, Let's Goooo 🚴💥💨💨💨
looked like a satisfying duece, I see you Wyatt 👀
Dang sick Edgar cut foo 😂
LET'S GO 🏁
12:33...You need an air hammer Kyle...
Next time you have to do some clearancing on stuff like that, use an air hammer with a flat face bit. It massages the material super easy!