How to Touch Up Your Walls | Nail Holes, Ripped Drywall, Cracks, Screw Pops
Vložit
- čas přidán 1. 05. 2024
- I just moved out of my house and as I removed the years of pictures, shelves, etc. I was left with some awful looking walls. I had a ton of nail holes, ripped drywall and so many other imperfections that I wanted to fix before I left. So I decided to make this video for anyone that might be in a similar situation. If you want to get your security deposit back, want to prep a room for paint or you just want to make your walls a little nicer looking, I hope this video helps you out.
If you have any bigger holes than the one's shown, I have another video showing you 10 ways to patch holes. If you have any questions on these patches or other ones, let me know in the comments.
I have tons of other videos on patching walls, muding and taping drywall and drywall installation, so if you need some more help on your walls, make sure to go check them out!
Finishing and Patching
• 10 Ways to Fix a Hole ...
• How to Repair Torn Dry...
• Joint Compound Sanding...
• How to Mud and Tape Dr...
• How to Mud and Tape Dr...
Installation
• Hanging Drywall and In...
• How to Hang Drywall By...
• Sistering Ceiling Jois...
• DIY Bathroom Remodel -...
• How to Properly Instal...
• DIY Custom Storage She...
• How to Fix Damaged Int...
Join this channel to get access to behind the scenes videos:
/ @thefixerhomerepair
• Subscribe on CZcams: bit.ly/SubscribeToTheFixer
• Second Channel: / @thefixerhomerepair2
• Facebook: / thefixeronyoutube
• Instagram: / thefixeryoutube
• TikTok: / thefixeronyoutube
• Website: www.thefixerhomerepair.com
• Patreon: / thefixer
• Amazon store: www.amazon.com/shop/thefixer
*As an Amazon affiliate, I earn commission on qualifying purchases.
Wizzy roller- amzn.to/4bdHyMd
Primer spray- amzn.to/3UDTGRi
Paint brush- amzn.to/3xP4YZZ
Paint- amzn.to/3UDU2HC
Sanding Block- amzn.to/3TQwfCN
Hammer- amzn.to/4aFIb10
Utility Knife- amzn.to/4cQGtf6
FibaFuse- amzn.to/4cLnsuB
Drywall Screws- amzn.to/4aJHcNT
6” Taping Knife- amzn.to/4aT5tAJ
14” Trowel- amzn.to/3xuk86N
Joint Compound- amzn.to/4b7FfdV
Easy Sand 5- amzn.to/3vTOeA8
Easy Sand 90- amzn.to/3TWvU1c
Dap Wood Filler- amzn.to/3vBxrC4
Mixing Bucket- amzn.to/43WxTaM
(Affiliate links)
DISCLAIMER:
This video and description contains affiliate links, which means that if you click on one of the product links and make a purchase, I will receive a small commission at no extra cost to you. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!
Videos produced by The Fixer are provided for informational purposes only. All material provided within this video is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Please use all safety precautions while following any instructions or concepts provided by this video. Viewers must be aware that by doing projects on their homes they are doing it at their own risk and The Fixer cannot be held liable if they cause any damage to their homes. It is the sole responsibility of the viewer to educate themselves on their local codes and regulations before undertaking any sort of project. Always have safety in mind and have fun! - Jak na to + styl
Confused about my moving out intro? Watch this video here- czcams.com/video/ce18zWOLmv0/video.html
Join this channel to get access to behind the scenes videos:
czcams.com/channels/Z32JAyPXVY2f3g2VxekBjA.htmljoin
Thanks for watching and supporting the channel! 😃
You are the Mr Rogers and/or Bob Ross of home repair. 🥰
Here's a tip I learned from someone who did drywall for years: He would do a fast survey of all the spots that needed to be touched up and would circle them lightly with a carpenter's pencil in a wide enough circle that it won't be completely covered by mud and then would patch everything he marked. When he'd come back a day or several later he knew where all the spots were by the pencil mark. He'd sand, which would lighten the pencil mark so he knew he'd hit them all. Any second touch ups would be circled again. Lather, rinse, repeat. He would interleave multiple jobsites while waiting on others to dry and sometimes he wouldn't get back to a jobsite for a couple of weeks depending on what was going on at the site. This tip increase his productivity so he didn't have to take the time to hunt for the patches and helped to insure none were missed.
Sixty years of my life in one short video. Everything you need to know
Whoever gets this house is going to have a diary of every square inch. Lucky.
This! 👆🏾🍀
I can't wait to see what you do in the new house.
That FibaFuse drywall tape. Where has that been all my life. Shame on you HomeDepot for not carrying it.
That stuff was seriously impressive.
I wish you were my neighbor. I need to learn all about remodeling and fixing.
Just bought a house and am having to fix all of these things. Best timing ever for a video
Matt is pumping out the content. We reaping the benefits!
You don't know how bad I needed this video. I learned something in literally every shot, including to tape some paper under the drywall, so I don't need to vaccum. Thank you for your honesty about the rooms you redid and explaining so well the what and why. None of the products are exceptionally expensive so it doesn't feel like you're an add. This whole video had the "hey buddy, let me show you some tricks I've learned" and I love it. This is the epitomy of what makes America such a great country. People like yourself sharing honest and simple to understand tricks. Much appreciated. Subscribed.
This is great to hear. So happy to help. Comments like this are the reason I make these videos!
I was a master painter and renovator for many moons. Everything you showed was something that I did, except for two things.
Your feathering is fine for corners, or around light switches, with a dry brush. Myself, I used a 4” or 6” low nat roller and dry rolled, though for itty bitty spots, would apply paint with a brush first. This always helped blend into a rolled wall much more gooder.
As for Durabond 90, I would recommend new DIYs to stay away from it for such a thin job. Great as you say for first layer of a small “new” tape job,and really goes nice and hard, and the clincher for new DIY. Do a lousy application, and you will become a truck driver, cursing to hell and back on that ride. Though, a slightly damp sponge can help to lower those ridges of bad spreading. This D 90, is also good for first fill layer of deep holes, and nothing else, as sanding is a complete bitch. For a new DIY, stick to an easy sandable product in the time of any of 20/45/90, to keep your frustration down.
Otherwise, enjoyed watching this, as it was a reminisce of part of my life for my clients, and occasionally for myself.
Congrats on your new house! I'm really looking forward to lots more great content!!
What do you mean, ignore the window sill? Ha ha
Isn't that part of getting a deposit back? I know...
it was all about the walls!
You're a very good home owner to leave it better than just "move in ready". I love the bloopers.
Anxious to see you make your new house your home.
Guess you will have to wait to see if I made a video about it... 😉
Someone's going to enjoy the fruits of your labor...
And pay the appreciation cost for it, too.
I like using the back of the screwdriver or a 5 in 1 to push in a small divot around the hole.
My favorite color, pink ❤I learned what a trowel is. Thanks ❤
Thank you for taking us one step at a time
This timely for me. I have all of the above to fix in my house. Good info. Thanks.
Thank you! Can’t wait for new episodes of the new house!
Loved this!!! This was so helpful to see the different techniques and products. Gives me so much confidence to make corrections to my walls. Thank you.
Congratulations and best of luck with the new house looking forward to many more videos
Thank you for all of the patching information. It is very helpful.
You might mention, that oil-based primer can be painted over with latex paint. However, oil-based paint cannot, as the latex will not stick well and peel off.
My dog tears up the door trim he's so excited for me to open the back door for him to go out, that I replaced it but kept the old torn up trim and just placed it over the new trim so now he just scratches that and the new one underneath is unscathed. That way when I move out I just remove it and no one is the wiser.
This was a GREAT tutorial! You explained in detail how to go about repairing different drywall issues. As a matter of fact I’m dealing with this now. And I’m feeling a lot more confident in tackling my repairs! Thanks 😊
This was very helpful! I foolishly attempted to remove painted-over wallpaper in my dining room and there are few spots that went down to the drywall paper. Okay most of it, it was most of the wall. I need to go find that primer in a can now.
It's OK to dry brush the whole wall if needed.
Besides labeling the can for the room/location, also date it.
Before putting lid on cover with saran wrap, then lid to get a good air seal, so paint does not cure in the can 🤓
Thanks for a great video, Matt. 👍 😊
You sir, do excellent work!
Door knob dent. Left over tile mastic works great. Super solid patch.
Tile mastic perfect for that crack under the window -. A homemade v notcher for that crack. Take a manual v shaped bottle opener / can opener. Grind the v to sharpen it …. Smooth walls easy patches. Show us how to blend into textured wall. I found what works for me is a brush dipped in the mud and dab it…
Paint storage I use old 1 gallon milk jugs. Easy pour out amount needed. U can see color tgru jug. No rusty cans / lids that won’t seal. Jug use the screw on caps not snap on. Easy shake up mix settled paint
Another tip your drywall premix pail will grow mold on top of it sits long enough. Store the pail upside down The mud sitting on the lid eliminates any air leaks to start mold The void in the top mud to bottom of pail is air tight so no mold grows on top of the mud
I call it my Pink Lady. Love it bc I like redecorating but hate the holes I make. 😊
The Fixer 👍
Try the volcano trick with the easy sand and pour the water in the hole, your subscribers will thank you.. Got it from Home Renovision. Thanks for sharing, can't wait to see the new projects.
For a quick patch you can use the 45 or 90 minute muds if you use hot water for mixing, it speeds up the curing process.
funny to think back when you redid the kitchen you were probs already thinking of resell value, meanwhile i was like "oh what a nice kitchen for you to have!" lol
looking at this and questioning if i can finally get myself to fix a couple cracks in two areas that have been there like... way too long, though funny it is that i might end up fixing something in our family's house and not my dad because to say he's impatient is putting it lightly lmao
Great job.
This is a very good video ❤❤❤ thanks
Awesome video
The problem I run into with filling small holes is air. The patch bubbles out. Sanding to make it flat causes the patch to fall out. I am not talking about over sanding. I have tried various ideas to alleviate this problem to no avail.
With anchors, I have found a razor knife can quickly and easily cut the flange of the anchor. The anchor can then fall inside the wall where it will be anyway. At any rate, the will no extra damage or larger area to repair.
My kids are so dang wild that a door stop does no good. I finally just put those circle, raised plastic doorknob stops at every door in my house. If you keep them clean from scuffs once a week or so, they look decent on the wall because you know it's either you have that or a hole in the wall 🥴
Just want to say - love the new house
Just wondering if you are going to go green with your power?
Solar off grid, heat pump , or something else
Underfloor heating, Evac
Would be very interested to watch you do that 10:18
I would never do that.
How'd you get so smart in so few years? I enjoy all your videos. Good luck with your move.
In the first ones, instead of hammer to dimple it use the back of the screw driver used to take the screw out. Less aggressive and smooth edges.
Fixing holes in walls, from pinholes to a couple feet across, has never been a problem for me. It's getting the spray-on orange-peel texture to not look like shit that appears to be beyond my capabilities.
You're THE BEST
Lacquer ( as in clear nail polish) or shellac will seal that torn drywall paper quickly. Then all you need to do is paint.
Question: What is the correct way to patch protruding drywall corners? Mine has some nicks in them, but I don’t know the best way to fill them in and get a nice finish on the corner again.
I sure you get a great price for your home. The new owners will be getting a fantastic house.
Instead of removing the mounting hardware I installed in my past rental, I decided I would 'pre-mount picture hanging hardware for the next renter' to enhance their move-in experience.
I have wood paneling painted white. Should I use the same stuff??
I used that pink stuff when I moved in to patch a hole and every animal in my house went right for it. It must have something in it that appeals to the animal nose. My dogs ended up chewing it out of the wall, and I had to go back to regular joint compound.
I don’t have screw pops but I do have nail pops. I think I remember a video, maybe not yours, that said to put a screw in right next to the nail so it covers part of the nail head. After watching this, I don’t know if that would work or not. 🤷🏼♀️
I was always told to wash off the sanding dust with a sponge before you paint… is washing it off necessary?
I've got a question so when you were fixing the slight dent in your wall where the doorknob created from opening the door..if someone has a huge whole in their wall from the doorknob repeatedly banging into would you say just to take that part and apply new drywall? We have two we need to repair
I was wrong he didn’t eat a shoe. He ate a window. Lol
What color is that in one of the bedrooms 33:10? I'm sure you mentioned it when you first remodeled and painted. I would have to look up that segment. It would be easier to ask now. Please and thank you. ☺️
8:47 I would probably just use dry wall mud for that instance. Especially since that dry sand stuff and a timer on it going hard would not be good for me.
ty!
Do you have to sand between coats or just at the finish?
What about acrylics paint peeled, but the drywall is intact how could it be level to paint again
Hey bro love your technique and the way you describe it good job 👍🏽
you can also punch those anchors into the wall and fill , lot better.
AS for the bigger ones you don't want to leave in because sparkle isn't made to stick to plastic and will eventually fall off the area (Screw POP) of the plastic Achor.
Don't use the hammer technique, because all you are doing is smashing the material back into the hole and it causes filling the hole to be inaccurate.
This may sound stupid, but… can cracks in the drywall be related to the foundation?
Thanks? 💜✌🏼🙋🏼♀️
Yes. But if they're along a tape joint, it's probably just a bad tape job. This goes doubly if it is a tract house because the tapers work fast on those and use tools that apply mud automatically.
So...when's the B'Roll Album coming out? XD
Blue top container is significantly lighter than the green.
Çan joint compound be used on plaster walls?
Yes!
were you fixing up this house because you knew eventually you were moving into another bigger one? and sorry if im asking again but do you still own that house and just renting it out?
I guess that's one reason people still use wallpaper, covers up a lot of problems.
👍
"Smooth as butta"
💖
doug demuro?
You might want to train your dog to not be so excited around the mailman...the eps of It's Me Or The Dog on CZcams show how it's possible
The next bob ross
🙏😁
for the algo
I missed the reason for this
Use the handle of the knife to press in the screw holes, not a hammer please.
members only videos sorry cannot afford them good by
The worst part of your videos...sitting thru 95% of it to get to the B rolllllll...lol .
Love your vids man
"Whatever these little nicks are."
Those ar Koda claw marks. 😆
Where is your mud pan? Mixing on d/w?🤣
Half of my tools were at the new house. Plus I just threw the drywall away when I was done. No cleaning. 🤣
Mr Natural says “the right tool for the right job”.😁