AD-1 Amp Dyno Taramps MD5000.1 by Jones Subwoofer Solutions JSS
Vložit
- čas přidán 22. 08. 2024
- AD-1 Amp Dyno Taramps MD5000.1 by Jones Subwoofer Solutions JSS
Manufacturer rated 5000w "Maximum Power" @1 ohm at 12.6v
Dyno bank consists of
1x 100ah Limitless Lithium
4x 16.5ah MiSolar Lithium
4x 150ah AGM
2x banks Maxwell Super Caps
2x Taramps ProCharger 180a chargers
------------------------------
Track: Early Adopted- Bedroom Sessions Ep. 10 ft Earthworm "Chur Boiz"
Music provided by Early Adopted
Watch: • Early Adopted- Bedroom...
------------------------------
Track: Early Adopted- Bedroom Sessions Ep. 8 "Strong Hands"
Music provided by Early Adopted
Watch: • Early Adopted- Bedroom...
------------------------------
I really like how straightforward your dyno vids are. Meaning, thankfully there's no "Big Dummies" (like in another popular dyno channel)
Ill rather have big dummy telling me how many amps its running and how effecient the amp is. If you dont care your a big DUMMY LOL
You big dummy
I clamped 5000 to 5100 Out of all 6 of my Taramps 5ks 1ohm @ 16v
Really 🔊
@@shakeygolden4812 Yep
Md5000.1? Im assuming because of when you posted this. Thinking of getting 1 on two rs gold 15s@@slapcitykustomz1658
Think I’ve mentioned before but I love the music playing in the background like that. Takes me way back to like early CZcams and even before that. Love the show!
Thank you for building my 8s and doing the miami vice colors!
Very welcome sir!!!
I’ve ran Stetsom 6k 2ohm export for over a year I did awesome been running a Stetsom 8k export now about the same amount of time it also kicks ass on custom made 15 inch subs with 4inch coils rated at 3k rms way conservatively. Gotta have powa to make POWA
Thank you very much! Don't know why they don't put the 4 ohm Watts on the specs.
Awesome video. Always good ta see what Team JSS is up to these days. Keep up the good work yo. Bass head 4 life💯
im running a skar vxf15d2 at 1ohm with a taramps 5k with a big3 all 1/0 wire and dual amp inputs from sky high. i dont know about you but my amp is only turned up maybe a qtr way with the boost up all the way with it boosting at 55hz and its plenty for my sub. i dont regret spending the 450 on this amp. plus you cant beat the fans. i like it. it works
Awesome. Would you recommend putting 2 of these amps with two subs. One for each? I have two skar audio vxf 15's.
@@drvictoria07
Hi, what did you end up powering your subs with?
@@EASTCOASTIMPERIAL I have two shock 5k amplifiers.
Thx 4 testing Taramps! Please test either one of the following two scenarios: Taramps BASS 8K vs. Taramps MD8K (OR if 8K is too expensive then the Bass 5K vs MD5K), HOWEVER, can we test them both at a low 12.6ish Volts AND also both at around 14.4V? Only because of the voltage requirement differences.. 12.6v (MD) VS. 14.4V (BASS)
I'll work on arranging something for you
@@Facekicker Thanks. I went ahead and purchased the Bass 8K and am curious if it receives only 12-13ish volts, will it not hit it's rated power. I was gonna go with the MD8000 bcuz it only needs something like 12.8 volts to hit rated power. I hope I didn't screw myself over by choosing the amp that requires higher voltage. Thanks again for your tests.
@@lowhertzhighspl Why did you go with the higher voltage amp anyways? Was it cheaper? If they are rated the same wouldn't it have been better to go with the MD and then if you are able to kick up the voltage it will produce more power whereas the BASS at the 14v would only do rated?
@@lowhertzhighspl return and get the md8000
Yes, I'd love to see what power the md 8k and bass 8k are producing👍👍👍
:50 1-ohm results was disappointing to say the least considering it tested at well above the voltage requirements claimed to be needed to hit 5K. This is just ONE REASON why I chose to go with the 8K over the 5K for my two 1500RMS each Skar VXF 15" subs. (Which I sold a week later and am rebuilding once again to something else: (TBD) Skar's ZVX or DNR? Deaf Bonce Apocalypse? Resilient Sounds Platinum or Onyx? Fi? Options are endless nowadays! Back in the day it used to be either Kicker, Cerwin Vega Strokers, or?, haha.
Taramps does rated @ 12v these amps are picky they dont like anything above 2v pre amp outputs/rca voltage thats probably why in this video it didnt do the whole 5k
@@slapcitykustomz1658 our bench uses 2v preouts
The dynos were not flawed
@@Facekicker Just wondering why it didn't do rated that's all
@@Facekicker this is true those amps won't accept more then 2v input, that's why I ended up selling the one I bought...
The zvx handled 8k amps each? How hot did they get?
Cool video. Thank you 👍
Looks like the smart 3 doing more dynamic power than the md 5k even though they say dynamic power ain’t shit but I would choose the smart 3 over this
Good observation... that Smart3k did put out more dynamic power.
Do you still feel that way?? They are coming out with a Smart 5k and I don’t know which one to buy 😂 Smart 5 hits 5k @ 12v and the
Smart 3 does all its cool shit at 14.
Would really appreciate your opinion thanks!
So the smart 3 is powerful than md 5000
Do you have a dyno test from 1ohm model @ .5?
I'm excited for a true tune.
🤣🤣🤣🤣 I hear wocka flocka doing his adlibs in the back ground
Are those power/ground wires 2/0? Did you notice any heat build up?
Yes they're 2/0
No to any heat
What's the efficiency percentage
So im confused this doesnt hit 5k watts or does it ?
Thanks for this
That new smart 5k is WAY BETTER on the numbers than this TARAMPS 5k.
Much much better
@@Facekicker I'm done cutting down Brazilian amps after seeing that smart 5k dyno. Cant believe it didn't go into protect after you tried it at half ohms!! LOVE IT
Like it nice
Why did the Taramps channel do 5100 @12.6 but yours did 4500 @13.6 🤔
They probably "juiced it" on the Taramps channel (can't let your own product look like it can't make rated power).🤷♂️
Yep up to clipping is my number.5k..im cool
I'm not sure what the deal is with your specific MD5k but I've seen them dyno 5.2k at 12V 1ohm
Are these amps power hungry?
All amps are*
How can it use single run of 0g shouldnt it require dual runs? Its pushing close to 5k certified
2/0
@@Facekicker2/0 car audio or welding cable? 2/0 is enough for 5krms??
@@akuma4u single run of 2/0 will support ~6k or so in bursts no problem
First time i see a md tested below rated at 1 ohm
Low voltage.
@@Zionslayer1 it is rated for 5k watts rms at 12.6v
@@thinshadow6669 This is true. Is Taramps Brazilian? Would you prefer Skr RP4500.1 or Taramps MD5K ? I'm trying to decide. Thx.
Brandon Lee md 5k all day
much appreciated.. now I just need to decide between this amp and the Skar RP4500.1 amp. Any suggestions?
Skar
Skar, brazilian amps have early clipping and it's annoying,. Except for the powerus amp. That's the one doesn't have early clipping and you can adjust up 6 v
Skar SK4500
@@keithmagnifico4164 same
@@ricardojuarez291 not exactly. For some odd reason a lot of complaints over distortion clipped or dirty signal etc. came from most RP models that haven't come with the SK! So there's that.
can you do Taramps Bass 5k
isn't that what this video is of??
@@lowhertzhighspl MD series and BASS series are the same?
@@TuffApe basically. .. bass v is not full range tho
@@TuffApe Now I know about the bass line. My mistake. I vote for testing the Bass 8K but I'd be happy to see Bass 5K. I'm having a hard time deciding between BASS 8K and MD8K. $120 price difference but more importantly, where I'm stuck at is the BASS series handles vibrations better, HOWEVER, the MD series need MUCH less voltage to hit their wattage claims!
@@lowhertzhighspl The MD is $100 cheaper plus less voltage to get rating seems like a no brainer. It also has a smaller footprint. The vibration benefit is a non issue IMO as you should never mount the amp on the enclosure anyways. Additionally the MD is full range which would provide better future use flexibility. Lastly from what I understand the Taramps dont like low voltage so having the BASS at 14v would be pain the arse unless you are running lithium. I was also looking the 5k but for $100 more the 8K MD seems like the best option.
Do the fans stay on the whole time it’s on ??
They do idle at a very low speed, they are controlled by a circuit that raises/lowers fan speed according to temperature.
Why it drop so low in volts
He's not using enough electrical to support the amplifier
I have 6 rockford fosgate p3 12s in my tahoe and my electrical is upgraded and its 1.33 ohm. HOW WILL THIS AMP BE FOR MY SUBS?????
Depends how well your electrical is upgraded and what impedance subs
@@Facekicker I can't remember the impedance it's wired at 1.33 ohms. I have a 320 amp alternator and a extra battery.
@@reckingball6242 Recommended to have ~300ah in AGM
@@Facekicker i don't know what 300ah AGM is. I was just wondering how that amp would be for my 6 12s
Can u do a test at .5 ohm on it see if it handles it
Not on the dyno, but the MD series will tolerate it wired to a subwoofer.
Half ohem?
You Dyno alot of amps. I have two sundown x10v3 I need a good amp to run them what would you recommend?
Taramps Smart3k
Will it run at .5 ohm?
With proper rise and electrical support yes
On the md5k is ot 1/0 power inputs
2/0
@@Facekicker crap I got 1/0 ds18 dual inputs! Guess I need to return then
@@basscaddy1449 the preferred inputs are from Ill Customz.
@@Facekicker will the ds18 1/0 fit the md5k
@@basscaddy1449 they aren't good to use because they're too short
This will no run two db drive g5 12" . Gotta buy another 5k
BOW BOW BOW BOW BOW BOW BOW LMAO 🤣
Great video Brother as always.