Hand Built Turbo Headers for Zac's Godzilla Swapped OBS Tahoe!
Vložit
- čas přidán 19. 06. 2023
- Shop millions of auto parts and accessories at ebaymotors.com and learn about eBay Guaranteed Fit program here. For more on the latest offerings, subscribe to @ebaymotors on CZcams and follow them on --
Instagram: / ebaymotors
Facebook: / ebaymotors
Last episode Zac got a huge g47 Garrett turbo for Waylon, his work-in-progress AWD no-prep drag OBS Tahoe. Now we're unboxing the new Texas Speed Titan Intake manifold for the 7.3L Ford Godzilla. We also get a breakdown on the 1900hp capable Tick Performance billet water to air intercooler. And fabrication wizard Johnny Branch comes through to weld up custom turbo headers for this wild application.
Special Thanks to :
TEXAS SPEED AND PERFORMANCE: www.texas-speed.com
/ @texasspeedperformance
IG: / texasspeed
TICK PERFORMANCE www.tickperformance.com
/ @tickperformance
IG: / tickperformance
JOHNNY BRANCH
/ branchengineering
Build Playlist ➤ • Zac's Turbo Godzilla-S...
We’ve got channels for all your car content needs. Subscribe, nerds!
The Hoonigans: / @thehoonigans
Ken Block: / @kenblockhhic
Project Garage: / @hooniganprojectgarage
Daily Transmission: / @hoonigandailytransmis...
Bonus: / @hooniganbonus
Stay fresh with the latest apparel: hoonigan.com/collections/the-...
Facebook: / thehoonigans
Instagram: / thehoonigans
Follow Our Crew:
Brian Scotto / brianscotto
Ron / roncar
Vin / vin_tra
Zac / mister_zachary
Gary / kinganytime
Big Rich / thatdudebigrich
Jameson / ronin_metalworks
Josh / josh__ohana
Angelo / tpfmfg
Jared / unicorn_tamer
Do yourself a favor and hit the bell so you don’t miss any uploads.
MERCH ➤ shop.hoonigan.com - Auta a dopravní prostředky
this is my favorite build on yt rn...................things people say in 2023: "What's your plenum volume?" "Can i fit my whole as arm in it?"
Agreed
BBP
This must be the only build you're watching then, From the turbo angle to the header size, Its not built to spec. Real good advice here, Wonder why this guy doesn't have his own channel. Oh wait, Because he's an idiot real car culture won't support
We need a “ZacMan” shirt with a camshaft “Chop-Signal” in the sky
Just a cam with all the Lobe Separation Angle
Or “Zac Chop” in the style of a Slap Chop infomercial screenshot haha!
You guys missed the oprtunity to have Big Timers "Big" sing to go with your EVEREYTHING REAL BIG. Maybe add that in the next one? HAHA
🙄
@@AnarchronisticPSN …what?
That turbo is very likely to push a oil into the compressor housing mounted at that angle
Yea I was about to say the same thing.. always a rule of mounting a turbo is to have the shaft parallel to the ground. Maybe it matters more with thrust bearing units.. ball bearing might be more flexible.
Might be an oil less turbo. Comp turbo has oil less turbos
@@jafferm1938 Its a garrett g-series, which aren't oil less.
Trying to bump this comment because they need to hear this
There shit only runs for one video anyways
*Thats a strange position for the turbo*
Anyone else instantly think that turbo is gonna be smoking 😂
Yes I learned the hard way
Yea and oil up a filter quick...
I was thinking the exact thing when I seen the flang at almost a 45 degree angle lol
It’s already smokin
at this point jameson needs his own build series, working on everybody else’s cars lmao
He's the new Suppy
@@MrJstnl48 He worked directly under him so it makes sense the guy can do pretty much anything. Suppy is a beast or a builder and I bet a great teacher
what happened to suppy?
@@matthewtamas8265 maybe he took time off to be with his family. He worked nonstop for whole pandemic. Or there might just be another top secret project going. Would love to see him rip his own cars in the yard tho.
Thank you for the kind words! We're honored to be a part of this sick build! #TeamTick
Concerns about the tilt on the CHRA for the oil?
#hoonigan ,concerned?..lol idk about zac but i am...
Build projects are forever my favorite Hoonigan content. Keep them coming!
I definitely understand the tumultuous time Hoonigan has had over the past 6 months. Hoonigan is a business at the end of the day, but part of me is still so disappointed Hoonigan never really acknowledged the talent they had to say goodbye to. Without knowing anything more, Suppy and Grimm deserved more than a thankless goodbye for the absolutely insane projects they put together in the past few years.
I wondered what happened to them, they were legit the fab fathers of hoonigan and everyone else has huge shoes to fill after the fact... I miss suppy and grim big time
Watching fabricators do custom exhausts always amazes me!
We see you Zac 🤣
makes me wonder about turbo support it's really big n heavy unit to hang from thin walled headers. Also oil feel/drain might cause issues with that much angle, I've seen promod turbo's mounted pretty tilted like on Tom Bailey's car but still a risk on blowing oil seals. Time will tell though.
Hope u don't have oil return issues with the turbo placed like that and no wastegate priority before the turbo there is probably gonna be boost creep issues also
I've been kicking around an idea about a heat exchanger set up that works better than just dumping in ice for a drag and drive truck. If you use 50/50 coolant in the heat exchanger system it can be a liquid at -35F. You could in theory put jugs of coolant in a freezer and pour them in as a liquid vs ice which won't flow just cools the water down from ambient temps but never goes through the system colder than 32F.
I've seen setups that run an ac evaporator in the tank or... you buy a small deep freezer and an inverter. Have a few jugs of 50/50 in the freezer at all times. The heat exchanger tank should have a drain hose on the tank, drain the warm mix into empty jugs to go in the freezer and put the cold ones in before you make a pass. Take the freezer out (find a place to plug it in) with all your tools, tires and spare parts.
If you built a sick ass drag and drive trailer with solar and batteries the freezer could just live in that all day. You could have an air compressor too.
Tie rod adjusting sleeves should be installed with the open side facing down to let dirt, water or anything else fall out.
The slot moves when you adjust it.
Shoulda had the turbo centrally positioned and ran two smaller deeper radiators either side of it. A equal length header design would make it a more revy boi.
It wont care.
That header design won't hold that setup back in any way.
This is gonna be sick.... Can't wait to see this bad boy rip!!!! Keep it up Zac!!!
Ebay motors is so legit. I love having my garage, and just randomly buying too many parts for my junk from my back porch. I live in the woods so this is heaven for a carcaine addict! From my Duramax to my Audi to my Toyota rock buggy. They have all the stupid stuff I need. Hootenanueau to the Hoonigans from North Idaho
My favorite build on Hoonigan Project Garage by far. Can't wait to see more!
Really taking shape now man, looking really beefy now , good stuff , love your builds Zak . Thanks
"this vs. zac" on its way
Zac does the cleanest builds, knows what he’s doing and knows what he doesn’t know
The way that turbo is sitting looks gnarly
The lana bit was hilarious, that and the random car sliding around mid video
Are you building a support for that turbo 54lb turbo? I fear it might crack the exhaust with its weight and vibrations.
It might be overkill or it could be preventative.
It is looking bada$$ I can’t wait until it is done I want to see what it does oh yeah 🔥
Doesn’t the crossover need a flex joint in it somewhere?
also turbo support? thats a "big bitch" of a turbo and i didn't notice a brace
Zac’s clips, IYKYK… the shreditors just get him 😂
Gunna be one hell of a smokyass turbo~
A company called RCV makes heavy duty halfshafts for 88-98 obs chevys...👍🏻
Johnny branch super sick work dude
THAT is one of the most b-e-autiful intake set ups i think i ever done seen
WTH im ready for more episodes... 3 months man!!! tighten up girls
I would definitely put a support under that hefty turbo so it doesnt start cracking welds n flanges from hitting pot holes n bouncing around
Im just glad u still ride a bike man!!
That intake setup is rad, need one for my b58
joined a couple days ago. caught up. love the garage vids. it's just mechanical engineering and putting it together. yo. nice. :D
Hoonigan special- Zac does dragweek!
that turbo angle is interesting
that intake set up is insane blew my mind on the fit
2:05 😂😂😂😂 best part
Instead of a regular cowl hood maybe get a fiberglass power bulge type hood made? (Like the Datsun that raced the Patrol or GN style)
This is an awesome build.
By far my favorite build on you tube
I am curious about where you guys are going to put the wastegate for the left bank
A drag week would be cool!
I want to see a “Zac Chop” shirt in the theme of a Slap Chop infomercial screenshot haha! This build is gonna be NUTS! Much love from Texas!
I can't wait to hear it!
This build is fuggin sick
Can’t wait for the next episode when he changes the angle of that turbo.
Looking good there Zacman!
Just what I needed
Call kryptonite suspension for front end parts for the obs tahoe...its Beefy stuff!!. 2 or 4wd doesn't matter..😎👊🏻
Love that turbo set up though.
Damn, that air to water IC setup is badass. Love that idea.
This is gonna be dope!
3:55 North Carolina in this muhtha!😂
Hoonigan does need to get into those drive and drag events. Would really bring a lot of attention to both groups.
That’s dude is the weld god 1000%
Sick AF!!
I'll be there to pick it up when you're finished 😉
this thing is going to be insane. Cant wait to see it rip
real les stround survivorman vibes when you by youself heh ♥
Zach is the most Texas’ Californian on the internet. Just straight loud cowboy vehicles that scream in freedom and bald eagles
Zac going to a drag and drive event? Can't wait for that.
First....that still a thing with the kids? Big Ford sounds are coming cant wait
This thing is gonna be sick
So happy that the exhaust isn’t coming out of the bumper
For drag and drive are you going to run dual fuel? One set for street drive and one set of race injectors
THIS!!!!
Seeing Zac's motorcycle to the side reminds me..................its been awhile since we seen a harley burnout🤣🙃
Keep your head up bud
Zachs voiceover for the Ebay Motors ad sounded like he was speaking in a bowling alley 😂
Absolutely 💯 awesome 👌 👏 👍 obs
Stay blessed
Solid 11 second truck
It’s name should be Sacrilege I love it😂
The fabricator is an old school pro. You can just tell he’s done this for a long time
I would suggest checking out an interchiller setup to tie in with your ac system.
Hell yeah this thing is gonna haul some ass nice job zac 👍👍
I love that Zac is leaning into the @getinthecar podcast energy 😂
eBay motors 👌🏽
OBS boyss !!!!
10:02
ALSO @Hoonigan do you guys have any ICE Engine Blocks laying around? Tuerck used them for the V10 Supra headers. They’re a lifesaver when fabbing custom headers and any other tubing. Takes all the clearance guess work out of the equation
Things got even more intense when I had that "so big" meme in high volume. Mom : wtf are you watching? Me: zac showing big things.
OBS BOIS 😤
Would it have been possible to flip the runners so instead of rear bias sweep it would have a forward bias sweep would solve the whole problem of interference.
My boy really said Gluck Gluck 3000! Lmfaooooooo ayoooooooooo
The quote from the thumbnail should be from mannie fresh’s song *Real Big*
I’d be getting a T6 to v-band adapter and tell Garrett you need same hot side A/R, but with 3” v-band connection…
That way you can clock that turbo better. Going to be nothing but problems on an angle like that… 👍🤘👍🤘
Awesome
This thing gunna smoke more then Snoop dogg with that turbo angle
Zack make me want to love V8s
Lol " dont die "
I think that's the only time I've seen a workshop video where someone covered the windscreen before grinding
Size Matters!!
"OMG, it's so huge!"
-Zach Mertens, 2023
😁😁😜😜😁😁
4WD launches!! Hit us up when you need to upgrade that steering.
Where can I get a T5 version of that awesome turbo crossover flange?
cant listen to this in public anymore lol
So cool to cut that out and send debris into the open engine valley. Intake ports covered, but?