We Heard Ya! Fixing Waylon’s Turbo Placement & Designing a Custom 4-Link Suspension
Vložit
- čas přidán 6. 09. 2024
- Shop millions of auto parts and accessories at ebaymotors.com and learn about eBay Guaranteed Fit program here. For more on the latest offerings, subscribe to @ebaymotors on CZcams and follow them on -
Instagram: / ebaymotors
Facebook: / ebaymotors
Head over to boxousa.com and enter HOONIGAN at checkout for 10% off site wide.
IG: / boxousadirect
Look: we’re all learning here. We don’t always get it right the first time and sometimes you realize your 88mm turbocharger might need a little more clearance. Or misuse your hubs. Or you need a very specific part. That’s why it’s important to have experts like Josh to design a custom 4-link suspension, Angelo to fabricate a shifter box, and Shawn to weld up your new plumbing... for a third time.
Special thanks to:
@vagueindustries
@hd_laser_supply
@brodini2828
Build Playlist ➤ • Zac's Turbo Godzilla-S...
We’ve got channels for all your car content needs. Subscribe, nerds!
The Hoonigans: / @thehoonigans
Ken Block: / @kenblockhhic
Project Garage: / @hooniganprojectgarage
Daily Transmission: / @hoonigandailytransmis...
Bonus: / @hooniganbonus
Stay fresh with the latest apparel: hoonigan.com/c...
Facebook: / thehoonigans
Instagram: / thehoonigans
Follow Our Crew:
Brian Scotto / brianscotto
Ron / roncar
Vin / vin_tra
Zac / mister_zachary
Gary / kinganytime
Big Rich / thatdudebigrich
Jameson / ronin_metalworks
Josh / josh__ohana
Angelo / tpfmfg
Jared / unicorn_tamer
Do yourself a favor and hit the bell so you don’t miss any uploads.
MERCH ➤ shop.hoonigan.com
I feel like Zach is holding down this channel he is real consistent with his build
This chanel sucks ever since Ken died. Hert left, Dan left, Suppie left and so on... Props to Zach for holding it down
Oh and the old runway is 100x better than new in the This vs That series
This is NOT hoonigan, Zach is just throwing money at this thing and getting people to slap it on, bought a whole complete engine for just the longblock, turbo fully mounted just to change it again. Bring Dan back let's get a proper build going with an actual budget, we all don't have hoonigan money.
@@Saltygarage Dan most likely wouldn't come back for that, he has got his own channel and builds
@@borkemowait Hert left??
I love how zac's builds always start as a "daily" with racecar capabilities but tend to end as a racecar with mediocre streetabillity
The fact you brought Josh in for the suspension, tells me you mean business with this build.
This truck, is going to be Nuckin Futs!
Two weeks since last upload. Did they kill this channel again? Hope not because it’s better than the main channel.
Just lower the shifter down so you don’t have to cut the lid more. It will look 100X better than poking out as well.
Great Idea!
That’s exactly what I was thinking. But wondered if it was high so the final gear could be reached.
Agree it’s pretty high and takes away from the stock feel
Would they be able to do it now?
@@gunbird6366, yes. Just cut down and re-weld that massive aluminum tower he built.
I didn't expect to see Josh (Deathwish at Busted Knuckle Video) here! He really seems to be drawn to every sketchy hacked V8 turbo build... 😂😁😜🤟
Will there be a “This vs Zack” series?
Let’s hope so 🔥🔥🔥
Grimm is either laughing or vomiting about the shifter mount.
You know what would be dope is a Hellcat-style custom headlight intake but with the double stack rectangle headlights!
Josh the suspension bro explains everything and simplified it so well. 🙌
I swear if they killed off the channel again I'm done with Hoonigan. This right here is their best content since the world went to shit in 2020 and I at least want to see them finish their builds.
Headlight tunnel to feed the turbo would be sick
That's just crazy that them CBC axles that you bought does not come a nut
No updates on any builds this week? You mf motivate me, come on yall, get in gear.
Just me, but i would have done my best to have kept the stock column mounted shifter.
as much as we love a good Chop and giant snails. i would love to see some evo or Bimmer updates.
Evo BMW and Audi demographics are smaller in the US than domestic truck/V8 owners/modders, so this content is kinda the bread and butter for them, because the videos translate into more sales for the parts companies they partner with.
bro i want the vr corolla updates
Speak for yourself, my guy. I love bald eagles
@@lifeofdre707 lol we all do but man i love me some rice as well.
Evo
When Zack says “sick” drink, zero chance you make it to the end of the video
with those wastegates placement you might have some boost creep tho
the roll center explanation was well summarised, a lower roll center can have more mechanical grip though
Looking good!!! The shifter through the console is SICK!! Can’t wait to see this Baby on This Vs That!!!!
My guy sounded like Jesse in the first F&F talking to Brian about the Koni adjustables on the orange Supra. Very knowledgeable.
Just tell the lads what you actually want Zac, you want a trophy truck you can haul, drive on the street and daily with.
I wanna see this vs McFlurry
We need to start taking shots, every time Zak says sick! I lost count by the end of the video!
I had a similar problem fitting a filter and found what is called a "cobra head" elbow. They are used in diesels and make a tight turn while maintaining as much area as possible for flow.
I've just been accepted into Uti "Universal Technical Institute" automotive trade school I can't wait till the day I have the ability to do projects like this, looks so much Fun!.
Bro, they accept anyone with money. Lol
I think gluing the piece of the console lid that was cut off back in place should finish it up nicely and hide that ugly hole. Maybe painting the aluminum black as well so it matches the shifter. Loving the build tho. Can’t wait to see it rip
Josh the Hilux guy from og Daily Transmissions is killing the game out there!
YES!! GIVE IT SOME OFF ROAD LONG TRAVEL SUSPENSION AND SEND WEYLON AIRLINES INTO THE SKIES!!!
Is that driver side waste gate going to be effective?
Don’t think either will be tbh lol no wastegate priority but hey who cares it will still
Be awesome
I'm still bummed it's not mounted dead center 😔
he's gonna take it on drag and drives. I feel like that's not an ideal placement for that application.
I've always liked the way the Detroit Diesel Single Turbo "V's" were mounted. Especially with the introduction of LSA style intracoolers. Doesn't look like that giant Ford engine leaves space for it tho. Truck is looking sick Zach.... don't forget to have a laugh time to time either bro!
Detroit's two smoke's feed a blower ifn you wanna coolio a Detroit's intake you have to boost juice it which gets u a hot rod diesel that don't blow black smoke aka that loser has more money than cents hope u got egts tho cause she will take it for a short pull but ifn u got a load on er you'll have to put rings in it best case worst case sleeve and piston at about a grand per hole check out zip ties and bias plies damn near melted down at least one hole in a v892 fire truck engine transplanted into a minty old kwhopper toetrk doing real mans burn out boiled all the coolant outo the rad and Mill
Glad I wasn't the only one who knew that turbo placement was the dumbest idea
Something about a slim brother in a cowboy hat with a so cal accent makes me certain he knows what he's doing.
Good on Zac for giving his homie's coffee company a shoutout.
"It's already smoking" had me out!😅😂😂😂
getting gears done in my jeep tomorrow 538's and then rcv axles up front and yukon chromoly axles outr back
It definitely needs a headlight scoop
I was just thinking how I haven't seen a video in a while, and here is Zach with another video. Then Scotto randomly showing up, looking like he just woke up..... Explains it all....
If you prefer to move the turbo rearward, it appears the flange could move back if the header & cross over feeds were reversed. Passenger feed goes to rear flange, if keep same feed but run to front flange input and adjust cross-over to now-open rear flange input. Thus moving the flange/turbo rearward one feed pipe length.
Perfect opportunity to make a 3d printed light with a turbo inlet to feed it more
Looking good! LMC sells the full dash and parts for the early GMT400 trucks, which I think looks better than the late models, which I think you should consider.
early bird gets the cake
Leaving the shop when there’s still sunlight is a dream every man in the middle of a build can ask for. Keeps ya off the choppin block with the Ol Lady haha
Cant wait to see how well that waste gate placement is gonna work
There's 1 on each side, it will be alright
I was gonna ask about the Volkswagen Corolla update but then I remembered Scotto is broken down in the middle of Oklahoma 🙃
Thank you for showing all the fantastic fabrication and Solidworks! Machinists are Functional Artists.
I haven't seen Suppy in a while. Is he no longer working for Hoonigan, or is he working on some top secret shit again?
He and grim are Gone'ish , scotto Said in an earlier Video that they both left for other Projekt but might make a comback If Garage 69 Kicks of again
@@patriklenck1735 I doubt it though, Hoonigan was bought out by another company, pricey projects that garage 69 did probably got axed for good
@@everrybody jeah i dont believe it either , ITS Just what scotto Said iirc
Where the @hoonigan crew at? Been a good while since anything from then!
I like Zach's Build more than the others. I feel like Zach is putting more Time and Energy into his build, which Anyone can tell. Zach took a totally different road than Anyone else and I Respect that. No offense to any of the other builds I ❤ Them too but I like a different road Every Now and Then. ✌️ and ❤
This hands down is one of my favourite builds I’ve seen in a long time
Another Tuesday, no update.
About time realistically bro this the only
Vlog we are worried about right now
If thats the same Hardcolor powdercoating out of NH....that man does good work. if i need ANYTHING id use him.
You should put turbo inlet where the high beam is bc you don't need high beam
so no update on the evo or the vr6 ae86 or the ls e36 or the 7.3 Tahoe?
Was wondering the same thing.
those part numbers are wicked to have, save so much time fartin around on the interwebs. Thanks man
& 7:31 34mm nut for a big truck... the ford 8.8 cv is a 36.5mm 1-7/16 inch. 1.5''
Is that an exhaust or a HVAC duct??
Yes.
You should hit up motion race works for one of the operator shifters when your ready to upgrade !
I love zachs team of professionals. The suspension guy really seems to know his shit!
It would be dope to get a sense of the man hours involved on some of these projects
Ayy Zac, get one of the 'Operator' shifters from Motion - they're pretty sick!
Also, an Outerwears filter cover for when you hit the sand for sure.
Man this is such a sick build!!!
Saw Josh on Vice Grip Garage. Cool dude. Love the build Zack!! 🍻
Man this is my dream vehicle I’ve always looked for the Tahoe but hard to find 😤
Hoonigan + Deathwish = Greatest Mashup EVER!!
BROTHER! Still rockin' headphones with cables man nice😂👌I thought I was the only person in the developed world who still uses them 😂
Sick build by the way 🤙
Congratulations Zac for your project and especially for the effort and work done.
We are with you and we support you.
and start once😂😂😂
Just top down designing a four link on a laptop.
Awesome to see the CAD work and engineering
If you were to bring this beast down to houston tx youd hurt alot of feelings
These videos always come in clutch for my lunch break
Bro that Bob and Weave from that Fuison lol
❤hustling and grinding 💪 when you see Josh and HD you know it will be fab👍 sick son, it's gona be a beast👍
Glad we fixed the turbo angle but what about back-purging the hotside… ahhh f**k it!
"quiet on set" *machine whine* is hilarious in not gonna lie
Very cool to see Josh and the shop New Hampshire people get shit done right and fast I know I'm one of them
No cheezecrust we want the chop! We love the chop! Keep it up bud, looking great man.
this handsome cowboy shows us that cartech is not rocket-science,and i love it!
You will need a flex pipe on the cross over it will crack
Maybe phone holder in that little center console gap.
No way that filter flows enough CFM.... might be good for street though!
1:16 Nowhere to ruuunn to baaabby! Nowhere to hiiide!
Yall missed it, Hoonigans are slipping.
7.3L swapped Tahoe, it is hard to say. But it is a Awesome swap!
This is going to be one Nasty truck.
Keep it as sleeper as possible.
What kinda hp numbers is this setup hopefully going to put down? I forget if it was mentioned in a previous video?
Truck going to be insane
"You wouldn't be able to tell that hogs under there"
That's what she said
I love the content, Zach’s builds are the greatest. Keep up the great work boys!
Light Roast = Good Taste = Superior Decision Making Skills... speaking of which, when are y'all gonna open my Jansz, Tasmanian, Champagne Method Sparkling?!
"Next week"... me seeing this video is posted over a month ago 😂
No plasma table at the new shop? Didn't they use it a ton for the halo and indyelement builds?
Josh looks like a more sophisticated Brad with the cowboy hat 🤔
Zach needs to say ice ice baby like vanilla ice
THANK YOU. That initial turbo placement absolutely killed any interest I had in the build. This revived it.
Got the same truck and front diff ,idk if it will hold your type of power level.
Are their other builds paywalled or something? Its been quite a while since we have seen anything on the evo or scotts never finishing this 86. Vins pretty much done.
Josh needs to take a trip to Florida and see cleetus n the boys to see if he can fix George's blazer Rocky
with how much those axles cost they should really come with the nuts included even if the old ones had fit they are technically one time use lock nuts.
Couldnt you get the Escalade with a console shifter factory?
What happened to project garage😢