My TurboClean DualPro Pet 3067 is not spaying

Sdílet
Vložit
  • čas přidán 23. 07. 2023
  • A quick tip on diagnosing your Bissell TurboClean DualPro Pet | 3067 spraying issue
    Monroevacuums.com
  • Jak na to + styl

Komentáře • 13

  • @christlife5122
    @christlife5122 Před 5 měsíci

    Your video helped a lot thank you

  • @ampg8862
    @ampg8862 Před 9 měsíci +1

    I have the one with no side switch but same top configuration. My tank is not qarped but it seems like it doesn't sit right so no spray. Probably why its on back order cuz its a common issue.

  • @darrelljessie3892
    @darrelljessie3892 Před 4 měsíci

    Thank you. I was making water too hot. This warped tank. You can try to reshape tank but best to get replacement.

  • @One-Day-After-Another
    @One-Day-After-Another Před 8 měsíci +2

    wow... that's never anything I've ever dealt with... a warped tank... but I'll bet there are people who heat the water to near boiling not thinking about the damage it can do... I just use my hot tap water ...

  • @Ca31_Buff
    @Ca31_Buff Před 11 měsíci

    Hey, so I have a Kirby g7 Diamond Edition and I’m having bag issues. My mini emptor doesn’t want to stay on as I’m vacuuming and pops off with very light pressure. I need to replace it, but I want to replace it with a genuine Kirby one and not a knockoff brand. I would like to get the Avalir mini emptor (color doesn’t matter), but im not sure which ones are genuine or knockoffs. Can you please send me a link to a genuine one please?

    • @monroevac
      @monroevac  Před 11 měsíci

      try this link checkout.square.site/merchant/45JV1W8XB23W3/checkout/D6CTKQX7G72LSOOOOAHMP6QJ

    • @monroevac
      @monroevac  Před 11 měsíci

      monroevacuums.com

    • @johnhadams5937
      @johnhadams5937 Před 11 měsíci

      Once you pull the trigger what physically engages (pushes or pulls) within the handle to make the resevoir/auto receiver release cleaning solution from the upper tank?

    • @Ca31_Buff
      @Ca31_Buff Před 11 měsíci

      @@monroevac thanks for the link! However, it says that I would need to upgrade to the F style fill tube. Will my old twist style one not work on this?

    • @monroevac
      @monroevac  Před 11 měsíci

      There is an adapter you can purchase square.link/u/jKYpDhqX
      But if you adapter can snap on to the full tube then you don’t need to change- there’s a chance that your may be a little smaller but try first before switching it out