Bissell TurboClean DualPro Pet Not Spraying
Vložit
- čas přidán 25. 06. 2023
- Bissell TurboClean DualPro Pet: amzn.to/3XqCQoM
Best Cleaning Liquid under $20/Bottle: amzn.to/3NnXMbz
If your carpet cleaner the Bissell TurboClean DualPro Pet or other is not spraying this video may save you a lot of aggravation and time by showing you the most common steps in figuring out why. Don't waste time just watch this video and figure out how to fix your carpet cleaner and get back to cleaning your carpet so you can finally relax! - Jak na to + styl
This Bissell really is a great cleaner! Get it in the link below:
Bissell TurboClean DualPro Pet: amzn.to/3XqCQoM
Best Cleaning Liquid under $20/Bottle: amzn.to/3NnXMbz
Dude, this is so helpful. We need heroes like you. Here is a cape my good sir!
lol thanks for the kinds words!
I have a different model, but I feel like this was much more helpful than most of what I saw online. I'm excited to try this tomorrow. Thank you for giving me hope!
Just seeing this now. I really hope you have/had some good luck. I know how frustrating these things are!
It’s great to find the first video I searched for this problem, was this guys bc he was too the point and covered everything
Excellent video. I used my machine 2 times and it worked perfectly, went to clean the carpet today to find no spray output. I wasn't able to figure out the cause by looking at it, or from the videos Bissell has either. I found this video and it fixed the issue. I was under the impression the sprayer was powered, I didn't realize it was gravity fed. Makes sense it can clog so easily. A tip I just figured out while cleaning my machine this time, if you hit the latch to allow the machine to pivot (as if you were using it), it lets the brush roll pivot down, making it easier to access the jets and clean the brush area.
Thanks a lot! I will try that later on. I had this problem and there was really no good video on CZcams or anywhere else really. So once I figured it out I knew I had to make one incase someone else was having the same problem. Glad our video was able to help.
I'm definitely trying this. Thanks so much!!
Good luck!!
Thanks for posting this! I tried it on mine and it worked!!!
That’s so awesome! Glad it worked!
Thank you!!
I'm going to try this tomorrow
Good luck!
wow - if only it were do simple as this.
it is my sisters and of course there was NO maintenance. so it was filthy lol
I took it apart [yes it had never been cleaned] scraped & blew off the excess. [wow there was a red thing under the dust] :o
the rest I did as you show and it drained great. :)
sadly the bottle on there wont spray. So I checked the bottle and it was working fine off the machine.
I again tested the machine drain & it works fine, but with the bottle it wont even drip (?) hmm
The bottle will drip when I apply a lot of pressure on it.
so gotta push on the bottle for it to work.
I like the pump spay much better. gravity like this one only works if Everything is like its supposed to be.
just need another person to press on the bottle. lol
yes I tested the cap and at varying tightness, just to stop any leaking & its just the way it is.
glad its not mine.
prolly a previous user error Im just not finding. ;)
Hmm…that sounds really weird. Check inside the bottle too and make sure nothing is clogging from inside. Sometimes residue/film builds on top of the clean water and then it sinks down and clogs the nozzle from inside. Hope you get it.
@@Kazerone1 yes I checked the bottle - it was clean & flowed great
[off the machine]
I did get it to dribble just a bit without pressing it and finnished the carpet.
it gleaned well, :)
Mine is doing the same thing. Even when I press down on the top container I get no spray. I have an older bissel that will spray but won't suck so I have to use one to spray and one to suck. Smh.
What can I do if I take the tank off and press the lever to see if the water is going down tubes but it’s not. I’ve searched everywhere including bissells website and can’t find a solution with that being the issue 😔
Use a shop vac to suck whatever is in the tubes out.
what should i do if the water is not going through the top area?
I’d try to get some air through it. Maybe a vacuum hose to suction anything out. Hope you were able to get it.
Mine has a dirty film in that clear crevice. I’ve soaked it, used foaming bubbles, tried to get bottle brush down! No luck. How can I clean it??? That’s how I can tell if sucked up everything! Help!
What do you mean exactly? Where is the film?
My tube attachment is plugged, what do I do?
Wait so it’s the hose clogged for the attachment? You can try a vacuum, might work. If you have access to a shop vac it’s better. If you can put the shop vac hose in the part that blows out use that to clear the clog. If not a metal hanger straightened out may work.
@@Kazerone1 sorry to clarify my hose is clear but not spraying water just slight drip. I've tried everything!
And there’s a dirty film where the jet spray holes are!!!
Is that the clear piece at the bottom. I’d soak that piece and keep tapping it on the floor lightly. It can take a while to work things out of that piece.