Beautiful! I love to have the chain so aggressively sharp she can’t quite make top revs, pro saws like to be worked hard, not sure the chain appreciates the beech, but the wood stove will. Thanks for giving me my 2 stroke fix, whilst I’m relaxing by the pool on my holiday, thinking about my Husky! ( Don’t tell the Wife)
The world is a crazy place. But then again the 2 companies know exactly what their product lines need, they filled their need, and i just bought the 572xp and honest its thw best saw i have ever run. It really is a 461 more torque, crossed with a high horse saw its very different than i expected, yet better in everway
1128 saws are some of the best saws made. I don’t particularly care for them in stock form, but once a good mill/woods port the 440, 460 are awesome but the 461 is the one that really shines ported.
462 bogs under load, fuel-thirsty, and I have trouble keeping the chain tight maybe it's the Australian hardwood. for a 72cc its a couple of pound liter starts up nice, love the carby air filter.
An unfair assesment , Here in Tasmania you would have to sharpen the chain if cutting after that many cuts in hardwood as the wood is so dense. to be fair the chain should of been sharpened as well when the bar was swapped
I,ve used both in Aussie string bark the 572 with xcut chain 462 super chisel after 2hrs cutting went for the 462 not much in it but the lighter weight and better grunt of the stihl when the going got tough made my decision an easy one
Moin. Welche würdest du bevorzugen zum Brennholz schneiden ? Ca.50RM Kiefenstammholz. Kleine Einschätzung im Vergleich der beiden Sägen wäre schön. Finde Husqvarna vom Handling her angenehmer. Fällt das halbe Kilo mehr bei der Husqvarna auf ? Will mir demnächst eine dieser beiden kaufen. Würde mich über eine Antwort sehr freuen
Thats Stihl RSC full chisel chain with agressive low rakers, a bit to much for that kind of hard german beech wood. I don't use round chisel. You can sellme one of your chains and i will to a comparison again ;)
So you are using a square chisel chain? In the west we use square chisel full skip cutting Doug Fire/Cedar/Pine what we call softwood...its frozen this time year have used on Oak and Madrone our Hardwoods...like full comp chain in that....be more like your Beechwood....try Oregon or Stihl square chisel chain, I hand file or use my Simington Square Chisel grinder. Best wishes be safe.Robert
Wieviele TG hat die Kette um auf beide zu passen ?Ich habe den Adapter für meine 395, bringe aber die Ketten von der 462 dann nicht drauf, bräuchte ca. 1 - 2 Glieder mehr
Brauchst 1TG mehr, bestelle meine Ketten immer mit einem mehr da ich nur noch Schienen mit Stihlaufnahme kaufe und den Adapter nutze, muss ich net doppelt Kaufen für Husqvarna/Dolmar etc ;)
Still trying to figure out why ppl say an 8 pin or 7 pin when the rim itself is stamped 3/8 7t or 3/8 8t which as the manufacturer says 7 tooth or 8 tooth . Sorry rant over
@@mcunard31 yeah I know why it's stated in the video . Just wonder why ppl don't say 7 tooth or 8 tooth instead of pin . The rim has tooth cutouts not pins . It's just a pet peeve of mine I guess
I was running this saw for about 2 hours at about a 30-50% duty cycle czcams.com/users/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
interesting fact, cylinder and piston on most of the 3 Series Husqvarna saws (346xp, 357xp, 372xp, 390xp, 395xp, 3120xp for example) were also made in Germany, by the company named "Mahle".
@@AlbertKel the husky clearly in this video has more power, less chattering and just cuts quicker. The real tests are in the field. On our log operations you can guarentee to rebuild a stihl twice as many times as a husky. Even a dolmar lasts longer we found
I don’t know what part of the world your from. But here in Australia we have only hardwoods possibly the hardest in the world and I can tell you that for every 10 pro chainsaws sold in my area 8 are stihls
@@Dechsi87 ok ma se riesci affilare bene non serve abbassare troppo il delimitatore lavora più sul rinterzo facendo meno punta entrando meno in profondità e stando più in alto nel dente, cosi la catena entra con un taglio più largo e non sforza nei tronchi grossi.
Come ho detto, dovrebbe essere il più faticoso possibile per le seghe. Era solo per il carico massimo di limitatori di profondità aggressivi. Questa non è una normale catena di lavoro.
@@Dechsi87 il limitatore non conta molto oltre gli 0,80 tende a incepparsi specie con catene con delimitatore singolo, x la velocità nel taglio bisogna trovare il giusto compromesso
@@catena744 Si trattava di renderlo il più difficile possibile per le seghe! Meno limiti di profondità, più difficile per la sega per trasportare la catena.
Let's bring a Japanese into the test all Hale the echo watch this space the new echo 70cc is on it's way if it's anything like it's 620sx it will out last and out performe husky and Stihl remember folks we ain't talking a 3year saw hear we are talking a 10year plus saw 🤣🤣🤣
What about all the 372 huskys still earning there keep out in the real world that are over 10 years old mark? 372's and 394's have made loggers more money than ill bet damn near any other combo out there.
You must be disappointed then? Cause the 7310 is anything but a powerhouse. Tiny intake/exhaust/transfers. Now the guy who builds my saws made a 79cc 620 was a nice build
@JS look up Charles Briscoe lol. He is hitting 8,8.3, and 8.4hp for 7310 work saws. 9hp wasn’t hard for him, yet he thinks it’s durability may be compromised. 7310’s are like 372’s. Just meh stock but become monsters once ported.
Beautiful! I love to have the chain so aggressively sharp she can’t quite make top revs, pro saws like to be worked hard, not sure the chain appreciates the beech, but the wood stove will. Thanks for giving me my 2 stroke fix, whilst I’m relaxing by the pool on my holiday, thinking about my Husky! ( Don’t tell the Wife)
Hard on pto bearings
Hard on everything
The Stihl sounds like an angry Bee! The Husky sounds like an angry Wasp!
That 572 is a mean machine
STIHLLLLLLLLLL 462 ...adoro a performance dessa motosserra
I love that the husqvarna..
The 572 was turning 1.5k more that the 462 in wood.
I do some porting myself. Both these saws were next level! I kinda know what you did too. Nice.
Husqvarna 572xp is very very good
Nice, both of them, thanks for that beautiful sawdust :)
They sound great, Stephen!
Huskys better saw all the way around. In 3 yrs when the stihl pops, the husky will still be earning firewood or money. And im a stihl fan lol
I’m confused too on the two brands 😂 I really want a 461, yet I yesterday aquired a 262xp to go along with my 272xp
The world is a crazy place. But then again the 2 companies know exactly what their product lines need, they filled their need, and i just bought the 572xp and honest its thw best saw i have ever run. It really is a 461 more torque, crossed with a high horse saw its very different than i expected, yet better in everway
Husky with one piston ring will pop first
@@lagoonrd4173
572 has two
1128 saws are some of the best saws made.
I don’t particularly care for them in stock form, but once a good mill/woods port the 440, 460 are awesome but the 461 is the one that really shines ported.
no stihl ms 462 matched! sound good too I love her voice as my roaring favorite machine! :)
You did an asewome job, they sound and act very strong. You shore put them both to theyr limits. Thank you for sharing ! Stay safe.
Husky ❤️💪
462 bogs under
load, fuel-thirsty, and I have trouble keeping the chain tight maybe it's the
Australian hardwood.
for a 72cc its a couple of pound liter starts up nice,
love the carby air filter.
Love my 572 cutting WA Jarrah, plenty of torque
@@man9170 at that weight .... not impressed ... 461 ported same... not even close 461 run over it .... same pounds
Bend your knees when ringing up logs and take half a step towards the log, otherwise over time you'll destroy your back. Nice saws, 👍
Husqvarna the Best
Husqvarna turned more rpm in the cut...
Excelent both greetings from România.
STIHL 😍
Nice work! Gotta low raker it sounds like, but both saws PULLLLLL!
They sound so different both sound like beasts
Both are good!
Nothing I’ve seen on your channel beats the makita / dolmar for torque and throttle response Cool videos enjoy watching
Just bought an eager beaver saw brand new at menards. It will kick the shit out of anything in this video!
Lol lol.
crazy strong saws. is there a big diference when limbing because the weight diference
How did you port Them? Could you Show it?
An unfair assesment , Here in Tasmania you would have to sharpen the chain if cutting after that many cuts in hardwood as the wood is so dense. to be fair the chain should of been sharpened as well when the bar was swapped
Agreed good bit of stringey bark would be a good test thats if we could even get these saws yet
572 is here in Aus. Check the latest catalogue n call the dealer! XCUT chain comes standard as well.
I,ve used both in Aussie string bark the 572 with xcut chain 462 super chisel after 2hrs cutting went for the 462 not much in it but the lighter weight and better grunt of the stihl when the going got tough made my decision an easy one
@@garryaylward8050 tried both, liked the extra torque of the 572 in our WA Jarrah
That Xcut chain is spectacular .
Moin. Welche würdest du bevorzugen zum Brennholz schneiden ? Ca.50RM Kiefenstammholz.
Kleine Einschätzung im Vergleich der beiden Sägen wäre schön.
Finde Husqvarna vom Handling her angenehmer. Fällt das halbe Kilo mehr bei der Husqvarna auf ?
Will mir demnächst eine dieser beiden kaufen.
Würde mich über eine Antwort sehr freuen
Not bad for an Easterner.....maybe put a sharp chain on next time...must be a round filer...learn to chisel file. Like that Husky
Thats Stihl RSC full chisel chain with agressive low rakers, a bit to much for that kind of hard german beech wood. I don't use round chisel. You can sellme one of your chains and i will to a comparison again ;)
Great sounding saws, do you port chainsaws for yourself as a hobby or is it a business for external customers? I'd love to get one of these.
The good part starts @5:09.
Nice.
Nice work,which do you prefer?
Хуска мощь и надежность
Best of the best STIHL MS 462 C-M.
The 572 will still be going when the 462 is in the scrap pile
si eu am una 565 husq. si sunt multumit de ea...sunt super drujbele amandoua....[as vrea s-o vand sa-mi iau alta 572 xp].....
So you are using a square chisel chain? In the west we use square chisel full skip cutting Doug Fire/Cedar/Pine what we call softwood...its frozen this time year have used on Oak and Madrone our Hardwoods...like full comp chain in that....be more like your Beechwood....try Oregon or Stihl square chisel chain, I hand file or use my Simington Square Chisel grinder. Best wishes be safe.Robert
Wieviele TG hat die Kette um auf beide zu passen ?Ich habe den Adapter für meine 395, bringe aber die Ketten von der 462 dann nicht drauf, bräuchte ca. 1 - 2 Glieder mehr
Brauchst 1TG mehr, bestelle meine Ketten immer mit einem mehr da ich nur noch Schienen mit Stihlaufnahme kaufe und den Adapter nutze, muss ich net doppelt Kaufen für Husqvarna/Dolmar etc ;)
Still trying to figure out why ppl say an 8 pin or 7 pin when the rim itself is stamped 3/8 7t or 3/8 8t which as the manufacturer says 7 tooth or 8 tooth . Sorry rant over
It’s so the viewer knows what tooth sprocket is used, NOT the user.
@@mcunard31 yeah I know why it's stated in the video . Just wonder why ppl don't say 7 tooth or 8 tooth instead of pin . The rim has tooth cutouts not pins . It's just a pet peeve of mine I guess
Theres pin sprockets that use pins to hold the sprockets together they look different then a tooth sprocket
I was running this saw for about 2 hours at about a 30-50% duty cycle czcams.com/users/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
😂
Which one is better and why ? I don't get it ...
looks like the stihl pulled a little harder
Next time run the Husky first BEFORE you dull the chain in the dirt!
never hit the ground, i did not cut full trough, to much stones in it. But people will always find something to complain about.
Another Stihl fanboy
Hey mate I have a farm 290 what could I do or put in it to give me about of Xtra kick an scream??
just do a muffler mod first, should be simple and effective, easy to do ;)
Thanks bro 👍 stay safe 🇳🇿
@@jimmy_digz1319 watch 1moonbuggy. I did what he does to my 290 and it made a world of difference
@@jimmy_digz1319 hwy big bore kit and intake, and exhaust porting, it will be crazy just mildly ported.
@@jimmy_digz1319 I posted a video of one I built.
👍👍👍👏👏🤝
HWK Tuning 😅👍🏻 Grüße
I think the 8pin is a hinderance to the husky. Worked good for the stihl though
обе хорошие
Штиль пооборотистие , по мне хускварна предпочтительнее.
Are those mastermind ports on 572?
no, all is done by myself
What are “mastermind ports?”
Josh S. Porting done by Mastermind
Qual é melhor 462 stihl ou 572 xp
Les limiteurs de profondeur sont trop abaissé. Trop hard.
c'était l'intention de ce test, contrainte maximale pour la tronçonneuse. Pas de chaîne normale.
OK très bien merci. Alors verdict ? J'aime vraiment la Husqy.
non taglia bene
Swedish vs German....lol cool
interesting fact, cylinder and piston on most of the 3 Series Husqvarna saws (346xp, 357xp, 372xp, 390xp, 395xp, 3120xp for example) were also made in Germany, by the company named "Mahle".
Husky smoked that stihl
The 572xp has twice of the power 😅😅😅
Only if it’s race ported and running race gas lol.
Sure proves stihl cant compete with a husky! Love it
Are you also observing pink elephants daily?
Stihl kicked ass
22seconds on stihl 18 seconds on husqy. also consider theres several cuts on chain by time the husqy is shown.
@@AlbertKel the husky clearly in this video has more power, less chattering and just cuts quicker. The real tests are in the field. On our log operations you can guarentee to rebuild a stihl twice as many times as a husky. Even a dolmar lasts longer we found
I don’t know what part of the world your from. But here in Australia we have only hardwoods possibly the hardest in the world and I can tell you that for every 10 pro chainsaws sold in my area 8 are stihls
troppa punta nel dente o troppo bassi i delimitatori saltella
La catena era intenzionalmente così, il carico massimo per le seghe per il confronto.
@@Dechsi87 ok ma se riesci affilare bene non serve abbassare troppo il delimitatore lavora più sul rinterzo facendo meno punta entrando meno in profondità e stando più in alto nel dente, cosi la catena entra con un taglio più largo e non sforza nei tronchi grossi.
Come ho detto, dovrebbe essere il più faticoso possibile per le seghe. Era solo per il carico massimo di limitatori di profondità aggressivi. Questa non è una normale catena di lavoro.
@@Dechsi87 il limitatore non conta molto oltre gli 0,80 tende a incepparsi specie con catene con delimitatore singolo, x la velocità nel taglio bisogna trovare il giusto compromesso
@@catena744 Si trattava di renderlo il più difficile possibile per le seghe! Meno limiti di profondità, più difficile per la sega per trasportare la catena.
Let's bring a Japanese into the test all Hale the echo watch this space the new echo 70cc is on it's way if it's anything like it's 620sx it will out last and out performe husky and Stihl remember folks we ain't talking a 3year saw hear we are talking a 10year plus saw 🤣🤣🤣
8 months later. No echo 70cc. Mean while I've been making $with my 572xp. Where's this saw at Mark?
What about all the 372 huskys still earning there keep out in the real world that are over 10 years old mark? 372's and 394's have made loggers more money than ill bet damn near any other combo out there.
You must be disappointed then? Cause the 7310 is anything but a powerhouse. Tiny intake/exhaust/transfers. Now the guy who builds my saws made a 79cc 620 was a nice build
@JS look up Charles Briscoe lol. He is hitting 8,8.3, and 8.4hp for 7310 work saws. 9hp wasn’t hard for him, yet he thinks it’s durability may be compromised. 7310’s are like 372’s. Just meh stock but become monsters once ported.
Husky all the way
Both saws will eat some wood but that husky looks like it mite be a little faster
Stihl is trash, under power, and hard to pull the cord start. Husqvarna is more powerful and easy to start.
Seem to take forever to start in the tree compared to stihl, in my opinion like.
Barney treeclimber for one initial start should be on the the ground. And saw will start according to operator tjning.
Misled info homie... never seen a husky on the fire line, second all the stock comparisons I’ve seen husky is always slower and heavier
Stihl ist besser.
Husky is always trying to catch up with Stihl engineering but just can’t do it.
Where? When?
Lmao thats just why the 592xp is the best saw out more like Stihl has to try and keep up