2008-2014 Dodge Avenger Remote Start Installation (Flashlogic FLRSCH5)

Sdílet
Vložit
  • čas přidán 21. 12. 2018
  • The point in removing the radio was so that you could hold the gray module next to the radio still while you were plugging in the remote start wiring. Check out the Flashlogic website for information on Installation and other available and compatible products. www.flashlogic.com/ . Check me out on Facebook at @charger383mopar and charger383mopar@yahoo.com and don't forget to like subscribe and click the bell to stay up to date with my latest videos.
  • Auta a dopravní prostředky

Komentáře • 33

  • @solitudenomercy9661
    @solitudenomercy9661 Před 4 lety +8

    All you really need to do is remove the radio the wire you need to connect to is at the top left between the radio and the guage that's all. You did more work than you need to

  • @gregl65
    @gregl65 Před 3 lety +2

    Getting this for my wife for Christmas nice video, very helpful!

    • @Jarhal728
      @Jarhal728 Před 3 lety +1

      I’m about to do this as well, let me know how it went!

    • @gregl65
      @gregl65 Před 3 lety

      Jared Halbrook went good we have a 2013 and have totake the center console out before removing the knee bolster there are 4 bolts in the compartment under the arm rest and two up by the radio than pull the parking brake lever up and you can slide the console back also there is a screw in the knee bolster by the door to get at it just pop the cover by the door enough to get a screw driver in remove the screw and carefully pry the knee bolster out.After I pulled the knee bolster and metal plate under it I could pull the skim plug with the help of a couple of pick tools.

    • @Jarhal728
      @Jarhal728 Před 3 lety

      @@gregl65 thank you!

    • @gregl65
      @gregl65 Před 3 lety

      www.avengerforumz.com/threads/removing-arm-rest-cup-holder-console.60523/

  • @MDKNemesis
    @MDKNemesis Před 4 lety +3

    Great video on remote starting the Avenger. I will definitely be getting one of these for my sxt 08 model when I can and use your video to install it.

  • @gregc7770
    @gregc7770 Před 28 dny

    Default running time is 15 minutes unless otherwise requested.

  • @jamesnail9
    @jamesnail9 Před 2 lety

    Does Flashlogic make a remote start for the Dodge Pickup in the background? No plastic to break.

  • @itsmontez5737
    @itsmontez5737 Před 3 lety +2

    If i have a key that has a remote start button but i don’t have the remote starter yet, will the key i have work with this remote starter?

  • @lizzethernandez698
    @lizzethernandez698 Před rokem +1

    Hi can you please let me know how you program your key to remote start? I have the same car but i cant seem to fond the instructions for that i got ot from ebay as well

    • @Charger383Mopar
      @Charger383Mopar  Před rokem

      Sorry I don't have this car anymore, and I don't have the instructions.

  • @calebmiller02
    @calebmiller02 Před 2 lety +2

    How has this remote start held up? Will the heat automatically turn on assuming the dial is turned on?

    • @Charger383Mopar
      @Charger383Mopar  Před 2 lety +1

      I actually sold this car to my sister but she told me that it's still working. If you have the heat turned up and on before you turn your car off it should come on when the remote start is activated.

  • @Ty-tq6qp
    @Ty-tq6qp Před 2 lety +1

    Are those c clamps holding in ur filter?….. why didn’t I think of that mines broke too lol

    • @Charger383Mopar
      @Charger383Mopar  Před 2 lety

      Yea it ran like that for quite a while until I was able to get my hands on a good replacement airbox

  • @ap-lq1cq
    @ap-lq1cq Před 4 lety

    Could you make a video on how to install keyless entry system in dodge avenger?

    • @Charger383Mopar
      @Charger383Mopar  Před 4 lety

      Unfortunately the keyless entry system on my Avenger was installed by the factory so I didn't have to install it.

  • @jdmarkel3296
    @jdmarkel3296 Před rokem

    I'm trying to get a plug and play for 2013 dodge advenger SE does it need to be flashed if it's a plug and play

  • @MarkVerstappen93
    @MarkVerstappen93 Před 5 lety +1

    Any reason why you got a kit like this if I may ask?

  • @bowiecall853
    @bowiecall853 Před 5 lety +1

    Did you need to flash your module.

    • @Charger383Mopar
      @Charger383Mopar  Před 5 lety +1

      Yes the module needs to be flashed. I got this kit on Ebay and the seller was able to flash it for me. I let the seller know the year, make, and model of my vehicle and they flashed it for me.

  • @gabriellaburnham7947
    @gabriellaburnham7947 Před 3 lety

    Why do you HAVE to be a licensed mechanic to get one? I tried to make an account to buy one and I have to say my company name and everything.

  • @nelsonsoler2943
    @nelsonsoler2943 Před 2 lety

    nesecito saber que tengo que sacar para instalarlo

  • @ginoasci2876
    @ginoasci2876 Před 5 lety

    hi, how do i change the run time on a 2015 GMC factory remote start so it runs longer than 10 minutes?

    • @Charger383Mopar
      @Charger383Mopar  Před 5 lety

      You would need to consult a service manual or dealership.

    • @ginoasci2876
      @ginoasci2876 Před 5 lety

      @@Charger383Mopar I did that's why I'm asking you.

    • @Charger383Mopar
      @Charger383Mopar  Před 5 lety

      @@ginoasci2876 the kit I show in this video is an aftermarket kit for Dodge and you are asking about original equipment on a GM Vehicle. I'm sorry but I'm not a GM certified mechanic so I cant help you.

    • @Charger383Mopar
      @Charger383Mopar  Před 5 lety +1

      @@ginoasci2876 I'm sure if you search Google you can find what you need.

  • @uelleu2568
    @uelleu2568 Před rokem

    My 2013 avenger has remote start, I just hit the lock button (honk) three times fast