2007 - 2014 Dodge Avenger Backup Camera Install

Sdílet
Vložit
  • čas přidán 28. 01. 2017
  • Parts used linked in the description below!
    Watch a full tutorial as a 2009 Dodge Avenger will have a License Plate Backup Camera installed. We will be using the equivalent of the Pyle PLCM10 camera system.
    This video applies to Dodge Avenger models for years 2007, 2008, 2009, 2010, 2011, 2012, 2013, and 2014. This video also includes dash trim and stereo removal, complete installation, wiring, and testing.
    Click here to see how to install the radio used in this Avenger:
    • 2007 - 2014 Dodge Aven...
    Click here to see a Subwoofer and Amplifier installed on this Avenger:
    • 2007 - 2014 Dodge Aven...
    Click here to see the front door speaker install on this Avenger:
    • 2007 - 2014 Dodge Aven...
    Click here to see the rear deck speaker install on this Avenger:
    • 2007 - 2014 Dodge Aven...
    If you have any questions, leave a comment below! Be sure to like and subscribe!
    Parts Used (Amazon Associate / eBay Partner Paid Links):
    Recommended Backup Camera: amzn.to/3csfJn3
    Parts Used (Amazon Associate / eBay Partner Paid Links):
    *Pioneer AVH-P4400BH (Discontinued)
    ---Recommended Radio: amzn.to/3j5ZrVE
    *Metra 95-6511 Chrysler/Jeep Dash Kit: amzn.to/3dngoab
    *ASWC-1 Steering wheel control module: amzn.to/3ilRprp
    *American International CWH-642 Wire Harness: amzn.to/2ULTbrU
    ---Note: If you want a preprogramed harness avoiding the need to run accessory power to the power socket, use the Crux SWRCR-59 (also worked with factory amplified systems): amzn.to/3hoiKqS
    *Metra 40-EU10 Antenna Adapter: amzn.to/2UKAuop
    *Pioneer Parking Brake MicroBypass: ebay.us/RVf61w
    Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases
  • Auta a dopravní prostředky

Komentáře • 44

  • @ProvoBeastAudio
    @ProvoBeastAudio  Před 2 lety +1

    Parts used linked in the description of the video!

  • @BigLui2909
    @BigLui2909 Před 4 lety +4

    You could also use the rear backup light as a trigger wire for some people who don't want to get to confused

  • @michael-xs1lj
    @michael-xs1lj Před 6 lety +17

    6:31 "Deez nuts" lol
    Sorry apparently I am 12.

  • @JNT4067
    @JNT4067 Před 6 lety +5

    Will the license plate light where you fished your wiring through be sacrificed?

  • @Mike-my5ld
    @Mike-my5ld Před 4 lety +1

    Just installed the exact same camera in my Avenger. One question for you. I left most of the extra wiring like inside where my license plate light is. Will that be an issue like if it rains? I did wrap all of them up with electrical tape where they were exposed.

  • @da8675
    @da8675 Před 4 lety

    I recently ordered an Android head unit that has a can-bus already attached. Do I still need to run a wire to the trigger wire or will the can-bus take care of that automatically?

  • @SickRobotOnGo
    @SickRobotOnGo Před 6 lety

    Did they add a plate light?

  • @VertesaGaming
    @VertesaGaming Před 4 lety

    What if i have that factory screen in my car??

  • @buckeye852002
    @buckeye852002 Před 2 měsíci

    Having problems locating the reverse control wire on divers side can you help. I found one wire white and green that has power is that it?

  • @GARB82
    @GARB82 Před 7 lety

    What size butt connectors did you use and will this same concept work for a Dodge Magnum ??

    • @ProvoBeastAudio
      @ProvoBeastAudio  Před 7 lety

      14/16 gauge butt connectors (blue kind). Same concept for a dodge magnum, yes!

  • @KSWAGG30
    @KSWAGG30 Před 7 lety +1

    Is it best to use the 18 gauge wire or 16 gauge wire to extend the purple and white reverse wire?

    • @ProvoBeastAudio
      @ProvoBeastAudio  Před 7 lety +1

      It is just a trigger wire, 18 gauge is totally fine.

  • @GoldenFreezer-
    @GoldenFreezer- Před 9 měsíci

    You said 3:57 look for a white and tan wire and then you said 4:08 you used a tan and green one. So which one is it bc I have both 😅

  • @eddiechannon89
    @eddiechannon89 Před 7 lety

    My back up camera came with a small red wire that comes out from the input, should I just attach that to the ignition switch wire?

    • @ProvoBeastAudio
      @ProvoBeastAudio  Před 7 lety

      It can be used for a few different purposes. Usually i attach this wire to the reverse gear trigger wire on the radio and attach the other end to the same location where we tapped into the reverse light for power for the camera. This avoids the need to search through that bundle of wires @ 3:53 and makes much more of a cleaner install.

  • @tylermiller2028
    @tylermiller2028 Před 6 lety

    My pioneer stereo harness has a green wire labels parking break. Am I suppose to tap into parking break?

    • @ProvoBeastAudio
      @ProvoBeastAudio  Před 6 lety +1

      Sometimes Pioneer will limit what you can do if the parking brake isn't applied. I suggest connecting it to the ground of the parking brake, or, using a microbypass unit so you don't miss out on some features.

  • @sirnitrix557
    @sirnitrix557 Před 10 měsíci

    6:30

  • @eduardomendiola5857
    @eduardomendiola5857 Před 6 lety +1

    What wire do I connect the purple and white reverse wire too ?

  • @rashadabridges4116
    @rashadabridges4116 Před rokem

    Where is the fuse for the horn

  • @oa8706
    @oa8706 Před 7 lety +1

    Will this work with stock Dodge Avenger Touch screen ??

    • @ProvoBeastAudio
      @ProvoBeastAudio  Před 7 lety

      Nope. Unless you can rig your Stock Avenger Touch Screen to take a RCA video input, or if it takes a back up camera signal. Usually just easier to replace the radio and add a screen later.

  • @BlackMajic90
    @BlackMajic90 Před 4 lety

    Can you install a backup camera on a stocked touchscreen

  • @pbjfode
    @pbjfode Před 3 měsíci

    How do you get the wire from the license plate light over to the taillight

    • @trajectoryunown
      @trajectoryunown Před 5 dny

      I used a bent wire coat hanger and some electric tape to attach the cable.

  • @alfredoaguilar5047
    @alfredoaguilar5047 Před 7 lety

    I installed the my camera works perfect!!! Unfortunately my left turn signal does not flicker. I get a rapid flicker and only the front left turn signal works. Any idea how I can fix that?

    • @ProvoBeastAudio
      @ProvoBeastAudio  Před 7 lety

      Check to make sure the bulb is completely plugged in and not loose, also check your wiring. Flickering indicates either a short or burned out bulb

    • @JNT4067
      @JNT4067 Před 6 lety

      Try purchasing a flasher

    • @Theywaswrong
      @Theywaswrong Před rokem

      Sounds like you may have cross wired and blew out the bulb at the rear. Try another bulb cause that rapid front signal light is because usually the rear bulb is bad.

  • @Lifewithbubble
    @Lifewithbubble Před 5 lety

    What kind of radio is this like the exact name

  • @gaiusnormanyo
    @gaiusnormanyo Před rokem

    If I tap the camera option on my head unit, can I see the feed from the camera without being in reverse?

    • @ProvoBeastAudio
      @ProvoBeastAudio  Před rokem +1

      If you wire your camera to accessory, so the camera is running when the vehicle is on, yes. If you only power your camera on the reverse light alone, it will only work in reverse.

    • @gaiusnormanyo
      @gaiusnormanyo Před rokem

      @@ProvoBeastAudio When wired to accessory, will the camera feed appear when I put my car in reverse? Can I have the best of both world lol?

    • @ProvoBeastAudio
      @ProvoBeastAudio  Před rokem +1

      @@gaiusnormanyo yes, as long as you still have your reverse trigger wire hooked up, it will also automatically cycle over to reverse image when backing up.

    • @gaiusnormanyo
      @gaiusnormanyo Před rokem

      @@ProvoBeastAudio Perfect, thank you!

  • @cashshawn
    @cashshawn Před 5 lety

    The video is stuck

  • @DreadedDestroyer
    @DreadedDestroyer Před 4 lety

    6:30.
    Deez nuts