Using the KG Q10H CPS
Vložit
- čas přidán 27. 06. 2024
- In this video we're going to do a comprehensive tutorial on using the Wouxun CPS for the new KG-Q10H Ham HT.
Please consider helping out the channel with a donation via Buy Me a Coffee. You can join the community or make a single donation. I really appreciate it. Here's the link: buymeacoffee.com/gadgettalk
Product Links (affiliate):
KG-Q10H HT
www.buytwowayradios.com/wouxu...
Wouxun Programming cable
www.buytwowayradios.com/wouxu...
FTDI Programming cable
amzn.to/4a6jpYj
Affiliate Statement:
Some of the links above are affiliate links. This means that if you click on them and buy something, I get a small commission. You don't pay more by clicking these links than if you just went to the retailer’s web site directly. Thanks for supporting The Gadget Talk Channel!
Store statement:
Please visit the Radio Related section of our Amazon Store for interesting and essential items to get the most from your radio and related activities.
www.amazon.com/shop/azjim12
Chapters:
00:00 Intro
00:15 Opening
00:50 Why CPS
01:22 Programming Basics
02:29 COM Port Selection
02:48 CPS Tabs and Entries
14:08 Saving Changes
15:31 Importing Data from Chirp
22:16 Wrap-up - Věda a technologie
You sir are awesome. Great tutorial. Saves me hours of typing
Great video sir. This is a new radio for me, so this was very helpful for programming my radio through this platform. That said, am I able to also program the KG-Q10H using the CHIRP next platform as well? I was not able to locate this model radio in the available options in CHIRP. Thanks in advance!
Please share with us the actual cable you use to program the KG Q10H. You mentioned using a non Wouxum cable. I know you said it was a FTDI cable but who make it? Thank you.
amzn.to/3u3QaW6
Thanks for the video, very informative as usual. Would programming the GMRS version of the Q10 be similar?
Sure. The big difference would be transmit frequencies would be limited to those associated with GMRS channels. Cheers.
Good content 👍Is there a knowledgeable person you could recommend to give a private crash course on this device -both gmrs and ham? thank you
Same question. Tell us about the cable you used for programing. I've checked Amazon, none seem to have USB-C which is required to plug into the Wouxun KG-Q10H. I will do Chirp with wimdows 10... Thanks
The radio programs through the K1 connector on the side, not the USB C cable. USB C is for charging only. Buytwowayradios.com has the red Wouxun cable, or as I mentioned, I found an FTDI cable also worked. Cheers. Check out the radio review here: czcams.com/video/TAJJDULsak8/video.htmlsi=4YP4-Vr01PQtUIDz
I just bought one and if i run any other antenna but the 6 meter antenna that came with it. It makes a wind noise while transmitting. So i have to use rhe 6 meter antenna on 2 meters and 70 cm otherwise the radio makes a wind noise while transmitting. Am i the only one with rhis promble.
Sounds like you need to call the seller. Shouldn't be like that.
@@GadgetTalk4U I had a similar promble with 2 qyt CB 58 radios I bought. They would only transmitt clearly in fm mode. And they where made for CB.
CAn repeaters be copied from CHIRP and pasted into this software? I have a few Baofeng and wanted to copy those channels into my KG Q10 to transmit in an EMERGENCY.
The Wouxun CPS has a channel import choice that allows .csv files to be imported. I suspect you'd have to do some work to get the columns right before importing though. Hopefully it will be Chirp-supported soon.
@@GadgetTalk4U chirp already supports the KG Q10 . I have a code written down at my office. I was able to go into RepeaterBook and copy and paste all my local repeaters into my new radio. Out of five repeaters, only two of them seem to be working locally.
@@naturecoastprepping2487 It's not listed on the Chirp home page. I haven't tried it in the software. Cheers.
@@GadgetTalk4U correct it is not listed. If you go up and click on help at the top of the screen, then click on load module, then type in 10692 it will open up the modules for the KGQ 10 G and the H.
7:14 It's absolutely stupid that a radio with 999 channels makes you figure the offset manually and doesn't have Repeaterbook integrated seamlessly.
Most manufacturer's CPS are fairly basic. I suspect we'll have to wait for Chirp integration to get channel imports. Cheers.
From another users post: "CHIRP does work, go to help, then "load module from issue" then type 10692. Now you can read and write to to the KG Q10H. And you can expand the frequency with CHIRP."