DIY: 5 Lug Conversion on your Car or Truck
Vložit
- čas přidán 25. 07. 2017
- DIY four to five lug conversion and wheel bearing replacement. In this video I show you how to do a 4 to 5 lug conversion on a Nissan 240sx owned by CZcamsr SaabKyle04, but this applies to any 4 lug car. You can also use this process to go from a 5 to 6 lug on a truck or even 6 to 5 lug if you want. You are basically replacing the wheel bearing and hub assembly so this lug conversion applies to many different cars and trucks.
SaabKyle's Channel and 240sx RestoMod: / saabkyle04
Tools and Parts:
5 Lug Hub Conversion Kit: amzn.to/2SknVfP
Locking Lug Nuts: amzn.to/2uwWaFe
Extendable Ratchet: amzn.to/2tJAneI
Breaker Bar: amzn.to/2uAW9hD
Torque Wrench: amzn.to/2uBrG2Y
Thread Locker: amzn.to/2uwX0BR
Antiseize: amzn.to/2h1Y5gi
→ Become a ChrisFix Subscriber: czcams.com/users/subscription_c...
→ Instagram: / chrisfixit
→ Facebook: / chrisfix8
→ Website: www.ChrisFixed.com
→ My Channel Home Page: / chrisfix
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week*
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. - Auta a dopravní prostředky
You're the only CZcamsr I watch ads for. Love your videos, and that's the best way I can help :p
Thanks a lot Beau! That really means a lot and helps greatly! What also helps is how you guys watch the whole video completely though! I know you do this because I can see the stats and I also thank you for that so so much!!!
ChrisFix i have a request and i hope you make this happen but is it possible if you can moke a video about how to uninstall and install a new sound system or a radio into a vehicle.
ChrisFix, why don't you say hi to me on face book
ChrisFix please make video everyday
ChrisFix long time subscriber live your videos,my ford ranger has a problem in the steering I uploaded a video of what it's doing , if u have a spare 5 minutes could you check it out and maybe give me a diagnosis. Thanks
Who needs thread locker when you have corrosion to hold your bolts tight
Chrismiester i have never laughed so hard to a comment before hahahaha:D
Then you get to play games of *MANLY BOLT REMOVAL.*
Live by the Atlantic Ocean (200 feet away)
Can confirm corrosion will hold bolts tight lol
haha
yawa
I was always afraid to do something on my car before, but since i discovered chrisfix channel, now I DO EVERYTHING on my own car. It saves me a lot of money and above that, i'm really proud after the work i did. So THANKS A LOT CHRIS!! KEEP UP THE GOOD WORK!!
That is awesome! I am glad the videos are helpful and that you are also having fun and feeling amazing fixing your own car! That is what it is all about!
plz do more vids
how do you fix the gear shifter boot cover thing
Yes, except you live in germany where you cant do anything without TÜV. ;_;
E B I know right but I'm too young and my parents won't let me even if I knew
chrisfix making sure we dont hurt ourselves during the repair is such a nice detail
Absolutely! Safety always comes before anything else!
@@chrisfix as a highschooler in the direction of carmechatronic I couldn't agree more, it is especially emportant not to hurt ur self when a tool brakes, if you hit your hand on the car and start to bleed, wash it off and put a band aid on it, be like our tutorial maker and friendly neighbourhood Cris that can Fix
Chris is the type of a guy that could fix your depression with just some common handtools
and medium strength thread locker
Damn that hit me. Real talk
Can someone please make a compilation of Chris saying “medium strength thread locker” from all of his videos.
Haha I’ll share it if it gets remixed.
I will do that! :)
Out with the old and in with the new
“Soapy wooder” I lovee When he says that!!
just run it through the rust belt for a few weeks there you go! medium locking strength lol
Best channel ever . KEEP GOING CHRIS
Thanks a lot!!!
Mechanic's hate Chris because he does everything by himself. Mechanics be like bro why😭
Haha
His friends and family love him though 😏
@@chrisfix im gonna rank you as a home car mechanic, bc you have sick videos
mechanics probably watch chris fix on the job
Mechanics hate Chris fix because he makes it look easy
When we will see “common hand tools” full engine swap?
I can't believe you fit all the details into a 13 minute video
Man, watching your videos really shows how easy a lot of "scary mecanic work" really is
I can't wait to work on my car now
Awesome!!!
Until something fucks up, bolt breaks off, cant get to a bolt your trying to loosen, replacing something to find out that wasnt the problem, of course losing that 10mm socket you need, breaking the tool you needed, not having the tool you need and finding out it's really expensive, hitting your head on the frame of the car by accident 😂😂😂, etc.
@@ethand.7801 sounds like u spent a fortune jus winging it. Good job
@@King_drew cant say that I have. Just annoying set backs
No Hub comes off that easy
This is one of the best diy videos I have ever seen, I was even looking to do this but kept watching until I realized it was over lol. Very well made, clear, smooth and quick. It really is good!
Wow the details he goes in to and patience to do what he does is crazy. LOVE every video, thank you for all the help to save money ChrisFix
Chris you always put out quality content! Wish you did more videos bro!
Thanks man! They are quality because from the minute the last video goes live, I start working on the next one. I spend at least 12hrs a day working on a video every day until it goes live!
ChrisFix that's awesome man. You never disappoint!
ChrisFix you my friend have saved me so much money and made me learn so much about cars thank you so so so much ❤️✌️
Damn ....I don't even wanna imagine that, it ain't easy man. Keep it up. Gewd!
Johnny Koch your right
Chrisfix wouldnt be chrisfix without his threadlocker
+ScorcherFTW lol
or his breaker bar
Red Reaper torque wrench
Microfibre towel?
Red Reaper no soapy wooder
I love how you do everything to spec and torque everything down 🤙🏽 you’re awesome man!
Dude, you’re so positive and helpful in these videos, thanks for being awesome.
90% of your videos I watch have nothing to do with my life at all but I watch them anyway xD nice videos man!
Thanks a lot! Hopefully you learn something new while watching as well!
I actually have two videos I would like you to make!! How to fix a sagging headliner of a car (the material one) and how to fix a small crack (big chip) in a bumper without spraying the whole bumper
Dons Plays check out bleepin jeeps channel. There are a few good videos. Also sun visors.
I thought i was the only one!!!
Quick tip: When replacing brake rotors, it's usually a good idea to also replace the brake PADS. If the old pads still have plenty of material, at the very least, resurface the pads with some heavy grit sand paper...
Good tip
So wonderfully and clearly described ..no mistaking exactly what needs to be done ..you guys do a sterling job ..many thanks and keep it up
I'm a simple man
I see Chris fix
I like
dude same
Means Chris fix = boob?
Ghassen Fathalli Chris fix > Boobs
This made me laugh really hard. Retweet.
*RETWEET*
I have always wondered if ChrisFix buys his medium-strength thread locker in bulk.
Not to mention brake clean, paper towels and the ChrisFix patented "Soapy Wooder"
Why? He just uses "A little Bit" .....
haha surprisingly I buy those small containers. I really should get bulk thread locker!
MrThecarfreak777 what's the paper towels for? ( ͡° ͜ʖ ͡°)
MrThecarfreak777 what's the paper towels for? ( ͡° ͜ʖ ͡°)
I've been subscribed to ChrisFix for a few years now. I've learned a ton and left a few comments.
After watching one of your videos, like the DIY no-weld rust repair I watched yesterday, I feel like I am an expert on the subject (not arrogant, but knowledgable) and can do just about any car repair.
His videos inspire me to do vehicle repairs myself.
Thanks, Chris. :)
I'm glad you learned a lot and are inspired the videos! Thanks!
Awesome tutorial. I will definitely be converting my mini cooper from 4 to 5 for more wheel possibilities. Thank you so much chris!
Chris just marry the breaker bar already😂😂
+Itsbeachbum ! I do!
ChrisFix you replied 😄😄keep up the great work when I'm old enough imma buy an 04 subie and use your videos as help and inspiration
Dont tell anyone but i caught him cheating with Blue medium strength thread locker
LowFD3S dude for real?!?!
Don't forget to keep the thread locker around in case the marriage doesn't work out.
It was awesome that SaabKyle drove 10hrs so we can work together on this collab video! Check out his build and his collab video here: czcams.com/users/saabkyle04
My subscribers can also contribute subtitles, the video title, and video description here: czcams.com/users/timedtext_cs_panel?c=UCes1EvRjcKU4sY_UEavndBw&tab=2
I have a 6 lug drum brakes what will I need to make it a 5 lug
ChrisFix i have an awesome idea you shuould take the oldest the most dirty car you have and clean its interior and exterior and engine bay and clean all the oil tanks and basically every thing and dont clean the towel ar dont throw old oil and fuel and the dirt came from its tank and see how much oil came out. I know it will take very hard work and time but pls do it im very very curious to see how much dirt and oil comes off
Thanks a lot Chris! I had a blast, we'll have to do it again sometime!
ChrisFix do an angel mod
+Saabkyle04 I cannot wait for future collabs!
A perfect camera angle and very informative great video god bless you
3:27 someone’s getting big 💪🏽
The breaker bar is so satisfying
not as satisfying as the torque wrench
Can you sometimes in the future do a drum to disc brake conversion? Preferably to a E30 :) since i have one. if not no problem Thanks
Winesh Ghazi check out might car mod they did a drum to disc on a Mitsubishi evo
Winesh Ghazi Nice. The e30 was always a good car.
In the process of doing 4 to 5 lug and drum to disc conversion on my 02 accord. I ended up needing the whole steering knuckle front and back.
Winesh Ghazi he’s going to, on a video he made on the mustang he showed a “drum to disk brake conversion” on the side bar. He also said all of those videos are coming in the future!
What e30 model do you have?
Been following your videos for many years and they are and have always been awesome.
Your videos never fail, I don’t even have to work on this just is fun and you really make it into a learning experience 🐐
Hey! I am 13 years old from norway i have been watching you for 2 years, and i have watched all your videos🖒👍
Thanks for the support!
ChrisFix do roll cage video
Uh oh we have another car guy in the making lol
aahaha im also 13 (well...14) and im also from norway
I'm 12
When I subscribed you, you had 500k subscribers. And now you have 2.3M subscribers!. And I hope you will reach over 10M as soon as possible
Stay amazing Chris
Thanks a lot man!
Sector Not enough car guys for 10m subs sadly
once north korea gets internet all the subs will roll in
4 months alter he has 2.7 mil
Its Not about subs its about how Chris is so much help to drivers , racers and truck drivers
Awesome video!! I love how you explain everything, even the little things. Best video I’ve seen in a long time!
Its amazing how chris has 6 mill subs and is still in his comment section showing appreciation and making conversation (rApPEr lol) What a humble guy
How to super clean the inside of a car?
Im looking for a dirty interior and when I find one, I will make a video!
ChrisFix want my bosses car? You'll only have to ship it from Australia
+ChrisFix
Well, u didn't see my car 😂😂😂
My engine bay is also so dirty 😂😂
Thanks Chris, glad to hear it's on the way at some point. :)
Chris my car is super nasty. I would be willing to drive to you to use my car.
i love how you so easily use mistakes as teachable moments "Pull it out with the pliers, and if ti breaks don't worry, just pull it out from the other side" You do this in a lot of your videos and I really love it. Things rarely go according to plan and it's nice to have a few extra tips
Me: Chris Im having some relationship problems
Chrisfix: here’s some medium strength thread locker
I feel like I’m a mechanic now perfectly articulated tutorial clear concise and easy to follow along. 👍🏾👍🏾
Your the man, makes things easy for us DIYERS...keep it up chris!!!!!
Show us how to super clean the interior.
Brayden Moncrief step 1: remove everything from interior
Step 2: go to parts department in nearest Nissan dealership
Step 3: order all new parts for interior
Step 4: wait for parts to come from Japan
Step 5: install all new interior parts
Step 6: fix any possible injury on self
Step 7: enjoy all new parts from Japan
Once I get a car with a dirty interior I will.
ChrisFix how tell if you have bad fuel pressure regulator
I can make it dirty for you for FREE!
*A licence plate*
I dunno i don't even have a car or driving license bc im 14 but your videos are just so entertaining since im very intrested what comes to cars and other vehicles that has 4 wheels and bc of your educating and entertaining videos i might be able to get that summer job from the local garage and i dunno about how these things work in america or other countries but in Finland we have this TET-week (työ Elämään Tutustumis. Im too lazy to translate atm but you can translate if with some translator or read my desciption btw) wich is that one school week you go to somewhere you wan't to work for one week and ask if you could go and work for them (without wage wich sucks but we have own day for that work too and they might give you a little tip if done good work) and in here where i live is only 2 car shops one is that garage and other is body shop so thanks to these videos and that my grandfather and father knows lots about cars and they will teach me too im starting to get a hang for this but i've heard that in USA you can get your drivers license when 16 years old and if that's true im so fucking jealous bc in Finland that age is 18
Awesome man! I am glad you enjoy the videos!!!!
ChrisFix ofc i do😁
I watch a lot of youtube tetrorials and it was such a pleasure to watch your clip even I had no intention to do any of these. but I acquired so much knowledge about a car hahaha. .
Very good video mate I'll certainly like and follow
Wow, this video is so informative and so simple. I really need this as i want to convert my hubs from 5-100 to 5-114 pcd on my 86. Awesome! New subscriber here!
"A real easy trick is to go into the interior"
Me: What interior???
That's what I said out loud too when I saw that 😂
i know this is a joke but incase you were serious, interior means the inside of said thing(sitting in the seats, looking inside anything, etc)
@@dumb2smartd376 nah it’s because there is nothing inside
I said the same thing...😂
Those stock(?) - wheels with those circles - are so 90s. I love them.
all your videos are so good its so clean an everything is so detailing i watch all your videos and take notes in a book
I have a ford focus, and I wanted to do a 4 to 5 lug conversion, and this video showed me how to do it! Thank you!
I'm sensing a drum to disc conversion in the near future...🤔
Haha you know it!
Please do my drums in my truck are due for an upgrade!
Yay I've been wanting to convert my 75 Mustang to disk brakes
ChrisFix I have a 75 caprice if you'd like to use mine as a model Chris 😎
@chrisfix I can drive to NJ for a video shooting haha
0:15 "whats up everyone" that made me weak🤣🤣
I know.. he wouldn't normally talk like that lol
I learned so much. My auto repair kills are really improving. Thank you.
*SaabKyle - my all time favorite car reviewer.*
*Thumbs up for SaabKyle.*
I'm 12 I don't have a car but I love to watch your videos because they inspire me to be a engineer/mechanic
Keep up the good work
same😂👍
MudJugBill that is actually wrong. They say if you get paid to do what you love than you don't see it as work at all.
MudJugBill you're going on personal opinion for you but if you actually loved your job it's not like working. Maybe your management or pay sucks. It also makes your skill set even better since you do it daily so personal projects would have a better fit and finish. I'm an electrician love what I do and just bought my first home and have many projects planned out.
MudJugBill I already am. Was doing audio systems for friends cars in high school. Did online how-to projects like making tasers out of Altoid cans. Not I'm an electrician and have been one since 2008. Currently building a nightlight for my daughter's room. It is what you make of it and you shouldn't be going around trying to kill the dreams of a 12 year old just because it didn't work out for you.
MudJugBill like I said, that is YOUR truth, not everyone else's. There is no need to down play what I said, it was a hobby of mine at a young age dealing with electrical things and now I make a living off of it.
I want Chris to upload more because I love this channel
If only this type of video and this quality didnt take time. I would love to upload more often and I am trying! The more I can help people, the better!
ChrisFix yeah i suppose it's hard
I can't believe that Chris just replied to me I'm 10 👍👍👍👍👍👍👌👌😁😂
I
In the video you never mention what 5 lug Disc covention was needed and where can we purchase it?
After 2 weeks of chris fix video's, my mechanic was sent to change his job. Well done chris!
OK, now that is a good idea. I just my do that to my Corolla to get more wheel options. Nice! Thanks again Chris!
Finally met Chrisfix at my local car meet😄😄👌👌
Sweet! Nice meeting you dude!
Does he show his face at the meets or does he wear a helmet?
heriberto cruz was he wearing a chrisfix shirt?lol
Jenn Dy usually?
ChrisFix when he is comeing to Houston?
That moment when my jaw hit the floor cause that ratchet extended. Buying now.
southernbman they're the best trust a
I just got one too!
haha, I link it in the description! For the price, you cannot beat it. I just started using it! Way better than switching to a breaker bar every time you need a little more leverage!
He'll I found a nice extending ratchet at harbour freight. Helps alot getting the extra pull/push. Three years later no problem. MAKES A NICE EXPANDABLE BATON DEFENSE WEAPON TOO!
Yeah, most of the stuff in the video is sold at harbor freight.
Very well explained. Looks so easy now. Thank you for sharing with us
bro how are you so good at fixing cars perfect without worrying. Also keep up the work man
I love how you do EVERYTHING step by step. I find alot of car youtubers that only skip to „fun” stuff. But i enjoy all of it, not only the new fresh stuff. And i will use this tutorial on my AdamLZ inspired 200SX s13 ❤️ ya bro
I like ChrisFix, because he's the only youtuber that replies to comments with 2,3 millions subscribers. :)
I do my best to interact with my awesome subs!
ChrisFix my 2 favorite youtubers I am getting a car it will probably be a 2011 civic I will be chrisfixing my car :D
ChrisFix I have been a car guy since I was like 5 I am 17 now
Where you from JDM Bro? The 2011 Civic is a great first car.
honestly.. u must be one of the best youtubers around.. u make quick and understandable videos for anyone to understand.. and u are well prepared for your videos and can also deliver nice quality on your videos... for real, probably one of the best youtubers around.. good work :)
Clear and straight to the point. Good video. I'm impressed.
Wow! I love the way u explain and show everything... super easy to follow...
Don't even have a 4 lug wheel, but still stayed for the whole video! So much to learn from you Chris, thank you for all your work these years :)
I’m glad you’re learning a lot!
I'm not even old enough to drive a car but I enjoy Chris' videos.
Awesome! When you are old enough to drive you will know more than most people on the road! Heck you probably know more now haha
Darn good job and video Mr. Chris. Pretty slick.
I can't say I like the new style rims, am partial to the older ones that weren't see through. But it sure was a great job and great video.
Great job Chris. Best video ever.
That’s a nice 240.
@@FishbedFive i think it's a 240 nsx
@@cafuushino its a joke dude
@@cafuushino r/wooosh
@@cafuushino it was a joke you can of spoiled baked beans
Yeah that is a cool volvo
chris is the only youtuber i stop what im doing and click that notification
I've been thinking of changing my 13 accent gs to a 5 lug nut pattern
This video got me thinking I can do it by myself 😊
Go for it!
Please keep doing more videos I love your videos you explain how to fix cars in a better way then my teachers from my institute do thank you so much for your videos they have helped me alot 😎
Could you do a video about "Super cleaning your car interior"?
It would be good to see. Until that day check out the Ammo NYC channel, they're good too.
I asked the same thing
I drive a 240sx, and I was about to do this, this video is perfect he even gave me the torque specs. I need to do no research because he did it for me. Great video like always
Preferred Drift what year is your 240sx?
Nick Crane it's a 1990, 89k miles, all original
Preferred Drift you still need to do some research unless you plan to buy this exact kit and even then you should still read.
james hawkins what? Already did t yesterday
Preferred Drift lmfao
After swapping my clutch out, (thanks to ChrisFix) all this other stuff he does like changing the rotors and such makes look easy. Thank you ChrisFix!!
Man, this is a clean video. Thanks for taking the time to do it right!
Finally you need to post more ive only been a sub for like 2 weeks but I've watch no joke 3 quarters of you whole channel ..keep what up what you doing
yeah
Damn these rims look real good on the 240
They really do! I was skeptical at first but after the hub conversion, they look awesome!
ChrisFix like!
Alex Grivas something about the TE37s, they look good on alot of cars. I love em so much I got 3 sets of them for future model cars I build
About to get my first car soon and wanted to do a lug conversion since the miata has a 4 lug pattern and theres a certain wheel i love thank chris this will help alot down my tuner path
Very nice video tutorial and great video editing! Everything is so smooth. I wonder what or how Chris looks like. 😀
This is crazy that you made this video, my grandfather has been asking me to do this for him so he can put his 22s on his new Lincoln 😂
Sharkbate I did the same thing but with 19s on my biological fathers 1999 Ferrari
Jaxon Walz
Just say "fathers" not "biological fathers".
Pizza Sub lol sorry mate
@@pizzasub3194 He probably lives with his Non-Bilogical Father...
Chris, thanks to you I could fix the brakes of my father's car. Thanks! I've learned a lot from your videos! (sorry for my bad english 😅)
KÖNIG SCHUMACHER are you german?
Rico Motions no, why?
I’m addicted to watching your videos!
Big fan bro I really do like your work 💪🏾
I watched you way before I had a car now that I have one I'm glad I learned how to maintain it and not waist a lot of money specially on the blinker fluid 🙄
I been a subscriber to saabkyle04 for 8 years.
That is awesome! I dont know if I even had a CZcams channel 8 years ago haha.
Best car youtuber ever, worth every second watched
Love your channel bro, helped me out a lott🙌
You make it look easy on the conversion. Great video as a tutorial. Most excellent.
I am subscribed over 60 youtube channels but you are my favorite, love you videos !
Nice choice in rims! Looks great
Saabkyle, the first youtuber I subscribed to.
Man, I love the way you present tutorials.
Is it just me or does chrisfix make everything look easy
Well explained, clear video, good job guys...
I loved these cars in the 90s my girlfriend had one and it was badass! This one should be awesome when it's finished!
thats why i put notification bells on, i know its hard to make these videos and u make very hard job! u are amazing! keep up hard work!
Thanks a lot man! That means a lot!
Thanks ChrisFix this really helped for my Nissan 240sx! Now I can get nice lookin wheels! 👍👍👍👍👍👍😊
Tayyab Butt yea the stock ones are ugly af
Rico Motions I know right
I know you're too busy for seeing this, but if ya ever do van repairs I'll eat that shit up!! :D
I've had these conversion kits for ages now and didn't realise it was this easy to install