How to build STANDS FOR WATER TANKS Construction| Metal Water tank stand
Vložit
- čas přidán 22. 02. 2023
- In this video, I will show you an Excellent technique on how to build stands for water tanks including metal stand for water tanks.
I've summarised an easy method about water tank Construction good for water harvesting.
What is the use of a strong water tank base?
Water is heavy, therefore there is need to follow a standard water tank design for a home, for a school, community considering health and Safety first. You have to give the water tank stand a strong base.
During the question of how to make a water tank or how to build water tank, consider materials and cost of building water tank, if your tank is round, consider a water tank round stand instead of square. Then after that, buy the best tank in India, best tank in Philippines, best tank in Vietnam whatever your country is.
I will first show you the most accurate technique for building water tanks as you will know how to do a simple DIY Concrete tank base of reinforced Concrete that has a pad footing,beams, bolts and nuts and how to interconnect them. Its a new water tank stand making for overhead tank scaffolding.
Next you will learn how to fabricate the steel steel tower scaffold that includes T-SECTION COLUMNS, Primary beam and secondary beams, part of steel building Construction or metallic steel Building. There are a number of water tank standard sizes, and in this video we used an example of a 10,000 litres water tank and 20,000 litres water tank
In the end You will know everything you need to know about water tank design standards, water tank steel tower design,steel elevated water tank tower design calculation and all the water tank design step. I hope you will like it
Here below are some of the products I recommend to buy on AMAZON that I personally use
Health and Safety Shoe (Brown) and (Black)
👉 amzn.to/3FYvEZ3
👉 amzn.to/3MGDOZU
Health and Safety Hat
👉 amzn.to/46d3Nir
Safety vest with reflective strips
👉 amzn.to/3sGP1Tr
Protective Eye wear
👉 amzn.to/49BGzpm
Safety Water proof Jacket
👉 amzn.to/46d4ckX
THE ONE TOOL EVERY CIVIL ENGINEER NEEDS (A MUST HAVE)
👉 amzn.to/3ukqK62
Buy along with this Tripod stand and staff
👉 amzn.to/3sChSbB
👉 amzn.to/40KQAfN
Total station
👉 amzn.to/46dZDH2
Theodolite
👉 amzn.to/46ltKg8
Buy this Tape measure here
👉 amzn.to/3ukCVQk
Best dumpy level with tripod stand
👉 amzn.to/3MGQMqE
HOW A SEPTIC TANK WORKS. Watch now👇👇👍
• How a SEPTIC TANK work...
WATCH NOW!!!!!!👇 MUST WATCH
• How to Estimate gi COR...
BEST WAY to estimate gi Corrugated metal roofing iron sheets
For ROOFERS, Civil Students and Civil Engineers ONLY👇👇👇
• How to Calculate Roof ...
How to EASILY Calculate RAFTER LENGTH
Watch Now 👇👇🔥🔥
• The EASIEST way to Est...
How to Easily Estimate timber for roofing
The 10 Types of Roofing designs that you must Know 👇
• The Top 10 Different T...
Calculate Bricks You need for Masonry Brickwork Here👇👇👇
• How many BRICKS in a s...
MUST WATCH 👇👇👇
• How to Treat Timber ag...
On How to Preserve timber against Anti termites before Roofing your house
Want to watch skilful knowledge on Building Tank base wall? CLICK HERE 👇👇👇
• Here's How to Build a ...
EXCELLENT GUIDE when setting out for an Access RAMP. Watch Now 👇👇👇👇👇👇👇
• Excellent! way to buil...
How to build a soakpit 👇👇
LIKES AND SUBSCRIBING ARE ALWAYS FREE🙏
Subscribe Now via👇
/ @ianconstruction
Here's HOW TO INSTALL THE GROUND MOUNT SOLAR SYSTEM 👇
czcams.com/video/UqR3GkpDlAA/video.html
Is the dummy plate casted/ covered by the concrete
When casting Concrete, we remove the dummy plate. We only keep the bolts open. Later when the Concrete has set properly, we bring the dummy plate and fit it in the bolts then tighten it with the nuts
@@ianconstruction Am waiting or the video of cost estimates please
@@allies4183 yeah sure, cooking
Another great video thank you 😊
I'm grateful that you find it helpful!
ayos na video ito boss.malaking tulong din sakin ito salamat boss.
you are most welcome kapatid, salamat sa pagiging bahagi namin
Nice video
many thanks
you are most welcome brother
Ian, you are so helpful.
Its my pleasure brother, I'm grateful for that 🙏
Thanks for explaining this thoroughly, excellent work 👍.
You are most welcome sir
Thanks for the good step by step info. Would you please show us how to do flooring of a bungalow
Good video brother man. I don't know if u have a cash app or any account we can donate to for you to keep spreading knowledge . keep it up!
My pleasure brother, I'm grateful that you find the content helpful, you can email me on ianconstruction.yt@gmail.com
so that I can send you the details where you can donate
I do really appreciate
Bolt placement is off the main reinforcement.. On my opinion it should be 50mm in, so as the plate base area cover the crossectional area of the civil column
While casting Concrete for the r.c column ( I mean the short one - the stub column)
And also the ground beam, we temporarily place the plate in, so as to avoid mistakes. We maintain diagonals at every stage. What is important is to ensure that the plates fit properly
Then the rest, such as as T section columns, primary beams and secondary beams are fabricated on site. They are fabricated following what is already built, we cannot follow the plan or drawing when doing the metallic fabrications because maybe masons might have made a mistake of 2mm or 5mm etc that might bring problems when fitting so what we do, we fabricate everything on site.
I hope it helps, in case of any clarification that you may need I'm available
Thanks I have identified muy mistakes from ur video
You are most welcome Godfrey, I'm grateful it helps
Thanks for this video sir. By the way sir grade 15 concrete has a mix ratio of 1:2:4 and grade 25 concrete has a mix ratio of 1:1:2
@Dee900
Concerning Concrete grades with their prospective mix ratios,
To make concrete we use CEMENT, SAND, AGGREGATES and also water which are mixed with a certain ratio and concrete is cast and put in a square cube and then put in a water for 28 days and afterward, it is tested in a compression testing machine. The compressive stress result is known as the “grade of concrete”. It is expressed in N/mm² or Mpa
Example: G25, Its doesn't matter which mix ratios you make so long as you attain the required Compressive strength
Mix ratios differ from location to another, what matters is the grade
The quality of sand is the one that dictates the mix ratio due to the silt content in the sand.
Good Sand has low silt content in it and vise versa.
When you put sand in a transparent test tube and pour water and then stir, leave the mixture to settle, there will be three layers. Sand at the bottom silt in the middle and water on top
If the silt content is high, you will need to add more Cement.
First confirm the silt content of Sand in your new location or different country of your new project before following mix ratios that are taught in class.
On some occasions, sand is washed to reduce the silt content in it.
In summary, mix ratios differ in different countries due to the difference in the quality of Sand in different countries or locations.
Your mix ratio is correct in your country, it will change when you move to Vietnam or to India or in Philippine. [what is important to note and untampered with is the grade of Concrete]
Does that answer your question sir?
@@ianconstruction that makes sense I had never thought of it that way thank you
As an Engineer, I will always prefer the use of stone dust which is coarse aggregate crushed into an almost powdered form. Using this most times eliminates the risk of silt and clay that can be sometimes seen in some samples of sand. This will also help increase the compressive strength of concrete. In my country, the Government prefers to recommend the use of stone dust especially when constructing 600×600×150 mm Lined drains for Roads. The lesser the presence of silt and clay in Sand to be used for concrete work, the stronger the concrete will be. Cube Tests can be used to determine the set of concrete cubes that would come out stronger (that is those that sand was used to form the concrete and those that stone dust was used). A compressive crushing machine can easily reveal the strength of concrete cubes after curing in water. Concrete gets to maximum strength after 28 days.
Well-done, nice explanation and video.👍🏽
Yeah true, I agree with you 100% Engineer
Stone dust will create a stronger bond with cement after setting compared to sand
Thank you for taking time to share your knowledge and experience with us, I do really appreciate bro
Very nice video and information...can you please inform what is the section you used for the steel columns , primary beams, secondary beams and angle bracings??
For steel columns, we used T Sections
For primary beams, we used T sections
For secondary beams, we used T sections
For bracings, we used the angle bracings or what we call the angle bar
did that answer your question, let me know!
Thanks so much for the video, Terrazzo is what I do for a living, hw can I get colored chippins like brown and greenish, nd yellow colors cause I only hv access to black nd white only.
Two hw can I get those pads as well? Thanks.
I'm not so sure of the country that you are in but soon, I'm rolling out affiliate links where you can get all these tools and materials
I am in lagos Nigeria, how much will it cost build a steel tower tank stand for 6000 liters of water of 1500 each of the plastic tank. Steel tank stand 1.8m x 2.4m x 12m high. And what size of steel sections would you recommend for such project?
I live in a different country bro but what I can do is sending you a list of materials required from the Foundation up to the steel metal fixing and welding part.
Then you can simply feed in the prices depending on the prices in your country
Email me at ianconstruction.yt@gmail.com
what will design for 5000liter tank
regards sir
P.S.Sawant
Just follow similar steps in the video but then instead of 6 pads, Consider 4 only
What's the total cost
It depends on the size, you can email me on ianconstruction.yt@gmail.com I'll break dow the prices for you
What is the weight of one stand?
Translate to English
How much does it cost?
It depends on the capacity of water the tank stand is intended to support whether 20,000 L or 10,000Litres etc
Email me at ianconstruction.yt@gmail.com I send you a breakdown of different tankstands and the corresponding price range
@@ianconstructionare you in Uganda
Yeah sure
Please share your contacts?
ianiconstructions@gmail.com
@@ianconstruction I've sent you an email
Can you give me your contacts please.
@@ianconstructioncontact please