DIY Tumbler Turner Build For Beginners | Part 2: Tumbler Turner

Step by step guide showing how to assemble a Turner for your epoxy tumblers.
Let's get social:
👉My Glitter shop: www.SOCglitters.com
👉Lets chat, share pictures, and raise each other up in my VIP FaceBook Group: groups/66793...
👉SOC Glitters Facebook Page: / socglitters
Tiktok: www.tiktok.com/@sandys_organi...
💌Happy Mail:
P.O. Box 7516
North Port, FL 34290
Everything needed for this project can be purchased at Lowe’s, except for the motors which were purchased from Amazon.
Materials used:
1/2-in x 1/2-in dia Plug PVC Fitting - www.lowes.com/pd/LASCO-1-2-in...
1-in x 4-in x 4-ft Whitewood Board - www.lowes.com/pd/1-in-x-4-in-...
1-in x 6-in x 4-ft Pine Board - www.lowes.com/pd/1-in-x-6-in-...
3/4-in dia x 5-ft L 480 PSI PVC Pipe - www.lowes.com/pd/Charlotte-Pi...
3/4-in x 16-in x 3-ft Edge Glued Beveled Pine Board - www.lowes.com/pd/Metrie-3-4-i...
1-Gang Gray PVC Weatherproof Old Work Standard Rectangular Exterior Electrical Box - www.lowes.com/pd/CARLON-1-Gan...
12-ft 18-Awg Brown Lamp Cord - www.lowes.com/pd/Portfolio-12...
radiant Single-Pole White LED Rocker Light Switch - www.lowes.com/pd/Legrand-radi...
Super 33+ 37.5-ft Black - www.lowes.com/pd/Scotch-Super...
3/4-in x 3/4-in x 3/4-in dia Adapter PVC Fitting - www.lowes.com/pd/LASCO-3-4-in...
1-Gang White Single Decorator Midsize Wall Plate - www.lowes.com/pd/Pass-Seymour...
OPTIONAL 3/4-in x 3/4-in dia Cap PVC Fitting - www.lowes.com/pd/LASCO-3-4-in...
WireGard 25-Pack Multi-colors Wire Connectors - www.lowes.com/pd/Utilitech-Wi...
3/4-in x 3/4-in dia Cap PVC Fitting - www.lowes.com/pd/LASCO-3-4-in...
#6 x 1-in Bugle Coarse Thread Drywall Screws (1-lb) - www.lowes.com/pd/Grip-Rite-6-...
2-in 18-Gauge Pneumatic Finish Nails (1000-Count) www.lowes.com/pd/Bostitch-2-i...
Motors - amzn.to/3gbWkrm
#SandysOrganizedChaos #TumblerTurner
Royalty Free Music provided by www.bensound.com

[@lynnettewilliamsfelton2829]

I'm sending this to my husband you husband is un intimidating. My honey is not a builder but he is a math guy and number guy so your guy is easy to follow. THANK YOU.

[@SandysOrganizedChaos]

Thank you again to my special guest, Jeff! 🤗

[@kathywilliams5732]

For sure he is a keeper! Thanks Jeff!

[@wadoit46]

Thank you it’s been a pleasure.

[@alenekyocum1983]

Your children are so cute peeping over the seat in the car❤️❤️😻

[@heidismith6148]

You could be a professional speaker, you rock, glad I found your channel

[@SandysOrganizedChaos]

That is so sweet of you 💜💜

[@AD-vn2tu]

Thank you!! I was kind of intimidated to try making a cup turner at home, but you explained it so well I’m headed to Lowe’s this morning to buy all the parts. My husband doesn’t know there’s going to be a project waiting when he wakes up today! ☺️ I’m going to have him watch the tutorial too!

[@alexandramcgowan1094]

My lovely husband found the videos in your Chanel, He supports me 100%. Saw me struggling with the turners from hobby lobby and went to HD and got all the parts and pieces! Came home with a big smile and many bags and told me he will be building me the turners for my birthday!!! Thank you Jeff and Sandy for the tutorials!!!

[@TwinFlameTreasures]

I love this Sandy. It’s very sweet that your Husband know’s what it is you do and the different terms. A Husband who is interested and listens! Imagine that :D lol Nice tutorial I very much appreciate that.

[@SandysOrganizedChaos]

I am very lucky! Thank you Erica 🤗💖💖

[@Grahame6332]

Thank you very much!!! I’m so glad I found you guys. You are both easy to follow 🌸🌸🌸🌸

[@AddictedNCali]

I’ve been waiting for this video!!!! Thank you! He makes it look so easy 😁

[@Bud0209]

This was a great video, I really appreciate how you took thetime to demonstrate every step.

[@alicedolengewicz1214]

Thank you for the video....
And thank you Jeff for taking the time to show us how it's done 👏

[@lorivaughan3719]

Thank you so much for part 1 & part 2 on how to make the turners!!! This is awesome & exactly how I want to make these!!! 😍

[@missbwwimbley2380]

Thank you. So kind of you to do this.

[@michellehealy4280]

Great video Jeff. Thank you for explaining the process.

[@patriciadelacruz6285]

This was amazing! Very thorough and LIVE that you all put the items in the bottom to make these! I’ll be making them! Keep up the great work! God bless you all!!

[@ConfidentPrincess]

This has got to be the best and most informative video I've seen so far on making a turner thank you so much.

[@byronsuzi]

Thank you so much, I made a six cup turner myself not the greatest but now that you have shared this I feel confident I can redo mine into a much simpler design

[@debbiedeshong5602]

Thanks again Jeff! It looks pretty simple to do with the exception of wiring :)

[@jennifermercer1618]

I am so excited about this video and the other one. I’ve watched so many tutorials some people don’t give measurements others don’t say what material they use. I am so happy there is you and Mr. Jeff. People who don’t mind at all sharing information. Thanks for helping me make this a game changer for my new small business. So much love and gratitude.

[@michelleadams6073]

Thank You for doing this. I am just getting started with this. Making one like it is a money saver for me.

[@vonellevanzant237]

Thank you again! I appreciate your experience and willingness to teach us.

[@kimcuervo2905]

Thank you so much for creating these tutorials. They are easy to follow, and relatively cheap to make. Thanks again.

[@kellyjean4981]

I watched this video and the previous video ages ago, but it seemed so intimidating.
I’m back to the idea that I’d like to make a turner, and this time the info sunk in perfectly. Cant wait to attempt this soon. Thanks for sharing

[@brittscreativevibezdiy]

I’m so glad I came across y’all channel. I watched part 1 and 2 VERY HELPFUL!! Thank you for creating this video. 👏🏾👏🏾

[@triciasanchez9797]

You make things look so easy. Thank you for doing this video. I have learned so much from you.

[@elisacattie5372]

Best turner video I have ever seen. You guys are amazing! Thank for sharing and helping!!

[@SandysOrganizedChaos]

Thank you so much, Elisa!

[@fancylady9280]

This has been the best video I have seen on CZcams thank you

[@marlawheeler4165]

Great tutorial! Very informative and you made it very easy to understand as well as easy to collect all the supplies with ease. Thank you!

[@SandysOrganizedChaos]

You’re welcome!

[@virginiasimer4171]

Thank you so much Jeff. Excellent job.

[@annettethompson2808]

Thanks Sandy and Jeff, great video!!😁👏🏽👏🏽👏🏽

[@SandysOrganizedChaos]

Thank you, Annette 🤗

[@marni7346]

Thank you! Finally a tutorial that tells you exactly what you need!

[@SandysOrganizedChaos]

🤗

[@christinacarrasco7080]

It is so nice of you to do these videos for us! So generous to show us your talent and share with us all of the homework you’ve done! What a generous, generous gift. You guys are the best. ❤️

[@SandysOrganizedChaos]

Thank you Christina!

[@scottwisotsky6144]

Sandy and Jeff thanks for such great tutorials. Y’all are awesome!

[@SandysOrganizedChaos]

Thank you!

[@maryellenrichards391]

I know it’s been a long time since you posted this video, but I love the very detailed step-by-step instructions. I don’t make tumblers, but I do paint vases and will need to modify things slightly to accommodate their sizes.

[@angelagill75]

Love the not today heifer cup and the cup turner videos.

[@SeekTheCoin]

Thank you for the great video. I have watched tons of videos of how to make this machine. My mother asked me to make one for here and I couldn't really find any good information on how to secure the motor to the pvc. I greatly appreciate your comprehensive video!

[@lorigellasch8194]

Great tutorial Jeff ♥️.

[@pcc4233]

Thanks Jeff you and Sandy are very good instructors!! LOVE, LOVE your guys videos!

[@SandysOrganizedChaos]

Thank you ❤️❤️

[@danalane6629]

Great tutorials! I'm about to build my second turner (the first I sketched out and kinda winged it!), and I think I'm going to build it this way, with some modifications to suit my style! Thank you for taking the time to make these tutorials! :)

[@suzannedudeck3345]

The absolute best tutorial I’ve seen! Thank you so much!!!

[@SandysOrganizedChaos]

Thank you! Glad to help!

[@hollyhold6960]

This is fantastic---all my son has to do is watch these two tutorials, apply knowledge, and, voilá! Thank you Jeff!

[@sarettapethick2294]

Love the video and the very easy to follow instructions!

[@natashawilliams5398]

Oh my goodness..I have been researching where to buy a good turner and stumbled across your channel. Your husband has explained how to make the wands and turners so well that I will save a lot of money by just doing a DIY!! Thanks!!

[@vincentlovallo7431]

Thank you for the video. The wife wanted one of these and this is one of the best videos I've seen.

[@SandysOrganizedChaos]

Thank you 😊

[@annnerren9370]

How lucky to have your own personal tumbler turner craftsman ❤️👏🏻👏🏻 Thank You!! Great video

[@SandysOrganizedChaos]

🤗

[@shelley4167]

This looks awesome. I've saved them ready to harass my hubby. Keep up the great work

[@debbieh1432]

Thank you again!!! I’m going to Lowe’s tomorrow morning!!😊

[@deearmstrong1885]

Thanks Jeff! That was awesome and easy to understand. 👏👏👏👏

[@tiffanyfair2487]

This is one of t he best tumbler Turner making videos I've watched, thank you

[@SandysOrganizedChaos]

You’re very welcome, Tiffany!

[@tamikka09]

Jeff you are the bomb. Tfs Sandy

[@tiffanyjonesmoore5458]

Awesome video!! This is great!!

[@ninagonzalez8683]

Great tutorial Thank you Sandy and Jeff!

[@SandysOrganizedChaos]

You’re welcome 😊

[@tinkerbvv4679]

Thank you so much for the info! I missed the part with the lamp cord and wiring into power plug.

[@Gtate13]

This is the best cup turner tutorial that I’ve seen yet. Thanks

[@SandysOrganizedChaos]

You’re very welcome!

[@rebeccapretty916]

You are awesome Jeff

[@ctconn35]

Awesome job, thank you wow that again a lot easier, thank you so much for your time on videoing this. Sent it right to my husband

[@prptink]

This IS the best video I’ve come across. You’re hubs is the best. I’m so blessed to have a super handy husband like yours 😊 thank you

[@lorissashappyhome]

This is the best! & he's super sweet about it!! 👏👏👏

[@SandysOrganizedChaos]

He is pretty awesome 🤗

[@hottrizzle]

Dude this is by far the BEST instructional video.. I'm on my way to Lowes..
Thanks🙂🙂

[@SandysOrganizedChaos]

Thanks Rod! Glad my video helped you out.
-Jeff

[@marciewright9280]

I love this one too! It's very thorough but knowing me, I'll screw it up. But I have someone that can build it for me. Thanks again Sandy and Jeff!

[@SandysOrganizedChaos]

Glad you enjoyed it!

[@cyndirichardson]

The best video ever!!!!! I'm going to try this baby. Thanks so so much

[@SandysOrganizedChaos]

You’re very welcome!

[@tajuanagolden-seibles3506]

Your video was a big help. You make it seem extremely easy to make. Thanks for you help and informative video. I like how you talked just in the right town and speed for me to follow. It was boring and it wasn't to fast to where I would have had to keep rewinding the video. Bravo!!

[@SandysOrganizedChaos]

Thank you so much Tajuana 💜

[@gorgeouslady6577]

Jeff is the most accurate person making tumbler turners. We love u Jeff and thanks a lot.

[@SandysOrganizedChaos]

You are very welcome!

[@kellyw6652]

Thanks SO much for doing this video!!

[@elishiataub3862]

I just finished making a 12 cup turner based on your video

[@traceycrawford9938]

Great tutorial!!! Thank you 🙏🏼

[@shannonbrown8471]

Thank you for the step by step and all of the details! it is very appreciated!

[@SandysOrganizedChaos]

You’re very welcome!

[@carlajohnson8574]

What an awesome video!

[@catchingandcookingcamping3528]

Thank you both so much really appreciate your tutorials

[@SandysOrganizedChaos]

You’re very welcome!

[@cathyrezba3132]

Great tutorial!

[@vollmersgirl]

You make the best diy tutorials very detailed thank you!

[@SandysOrganizedChaos]

Thank you!

[@maribelhartman4600]

Awesome Jeff!!!!! Thanks.

[@SandysOrganizedChaos]

You’re very welcome!

[@whispasoft]

Thank you for being so precise when giving directions on how to build this. SOME of us arent carpenters. lol. you are the GREATEST. You are handier than a pocket on a shirt. lol.

[@gailjohnson3544]

Love it.

[@andresrobles0811]

I'm not much of a handy man but I'm going to try to make this exact one for my wife. I'll let you know how it comes out. Thank you for the video!

[@ruthm.4997]

Awesome video!! Thank you so much 😊

[@ZsoCreative1NJ]

New subbie here! Thank you guys so much! Love the channel💜💜 keep up the great work!

[@KayKoviak-fi5zs]

Great stuff

[@susanaguilo6047]

Thanks Jeff for the video I made my first turner all by myself no help from the husband.

[@makingMyHouseaHome412]

Excellent video

[@reneebanbury7066]

Great video - thank a bunch!

[@sofie7073]

So amazing

[@anrashar]

Happy New Year Sandy and Family. My name is Waunda, and I am about to start my own business. I first saw your video, when you did the wine tumblers and bottle set, and that truly fascinated me. Your work is awesome, so I decided to follow and subscribe to your channel. I will be contacting you for tips. I do a variety of different types of crafts. But now I want to get into epoxying. You are an amazing woman, and please keep the videos coming. To you husband, thank you for the tutorial on how to make a tumbler turner, I was trying to figure it out, thanks a bunch.

[@lizmartinez8070]

Awesome thank you for sharing

[@marysorrells]

Thanks for video!!!!!

[@bizzycrafter6783]

Thank you awesome video

[@moto_story77]

Nice job!

[@SandysOrganizedChaos]

Thank you!

[@sherylldupuis6323]

So helpful. Thank you. ❤️

[@SandysOrganizedChaos]

You are very welcome!

[@shawnahyles930]

I make mine the exact same way but I also add a 3/4 quick release hose adapter and screw to the end of the wand and the other side to the turner where wand connects. Hope this helps. Its a total game changer

[@SandysOrganizedChaos]

Great idea!

[@marymote8951]

thank you very helpful

[@Jorge-MX]

nice!! Thank you!!

[@johnfoster8906]

jeff i would just like to suggest that when you attach your boards on the lines and the shelf in addition to thr nails i would also use wood glue along the bottom of each piece before you set it on the line it will increase the strength of your joint and the nails won’t be thr only thing securing it let it set over night and you would be hard pressed to get it apart

[@SandysOrganizedChaos]

Jeff suggested that. But I didn’t want it to be glued incase we needed to pull it apart for repairs. And it’s just sitting here so I didn’t really think it needed it. 🤗

[@johnfoster8906]

would it be possible to show in a little more detail how you wired the switch and the motors to the plug

[@vanessareveles6922]

Thank u so much for sharing.

[@SandysOrganizedChaos]

You’re welcome!

[@designcreateescapewithlaur8211]

How long have you been using those certain type of motors and what brought you to decide on those?
Thank you again so much for your tutorials! I have my wands built, now working on getting the supplies for the turners!!!! SO EXCITED!

[@jeanettejames5528]

Me and my husband built this based on your video. You should have seen us in Lowe’s looking back and forth at this video in the store for 40 minutes 🤣🤷🏾‍♀️🤣 thank you a

[@SandysOrganizedChaos]

🤣 we did the same the first time!

[@jeanettejames5528]

Sandy’s Organized Chaos the difference is your husband is handy. Mine, not so much 🤣🤣🤣🤣

[@vickiejacobs1017]

Thanks for the video

[@SandysOrganizedChaos]

Absolutely 🤗

[@babydzcreationz510]

That was awesome. Very thorough is what I loved the best...You don't see much of that on videos.
Tip: maybe lower the music a bit. But other then that it was great!
Only thing I don't know if I can do all that. I mean i just would like all of that but not the motor parts. Is there a similar way to create that w/out adding the motors? Thanks !!

[@Hazeleyez38]

Omg!! I love this video, you’re very detailed. I have confidence I can make one for my daughter now. Have you tried making one with a cover I seen one where they cover it with plexy glass.

[@SandysOrganizedChaos]

We haven’t tried the plexiglass but that sounds like a great idea!