Making a Lure Turner/Tumbler Turner, Space saving turner that folds up.
Vložit
- čas přidán 25. 08. 2024
- If you use a lure turner to clear coat your lures, or you use a tumbler turner for your painted tumblers, you need to watch this DIY turner video. I know lots of us making lures are working in tiny spaces that maybe doubles as a closet or utility room. Using up a bunch of space for a big bulky lure turner is just not feasible. So I decided to design a lure turner that collapses into a small easily stored box when not in use. This video shows you every step.
Small motor on Amazon:
www.amazon.com...
If you're wondering where to get the small 110 volt low RPM motor, I put a link at the bottom of the description. But just a little tip, those are microwave turntable motors. If you have an old microwave you'll see at the bottom a small access plate. The little motor is easy to remove. As always if you choose to work on appliances you do so at your own risk, be careful.
Here's the link to the motor I used.
www.amazon.com/gp/product/B07CGD9MS3/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Thanks, will be ordering that motor. LOL, just pitched a microwave that went belly up after a power surge during a storm. Who woulda thunk 🙄
Have you noticed that this motor is pretty hot to the touch after running it about 10 minutes? Have you found that to be normal with yours?
I finally finished mine. I didn't do the extended part because I won't be doing lures that big. I have lures backed up ready for the final coat of finish.
Nice. Send me a photo if you like EngineeredAngler@gmail.com
Besitos de abuela!
Loved it!
I don't have any sch 20, so what I did was insert a 3/4" sch 40 into the adapter and used a 7/8" forstner bit to widen out the reducers. The 1/2" PVC fits well. At the back end of the reducer there is a stop in which the 1/2" cannot fit through. The 7/8" forstner bit remedied that issue as well.
Nice work around...sch 20 isn't available anymore 😕.
Love this man! I bet you were the dad of the year around science fair time!! Your my idol!
I just love the process...thank you.
Not "kill you", not "knock you out" but "knock you dead"...Absolutely love it! Also really liked the end with ( I assume) your mom! Thanks again for all the valuable information.
Glad you enjoyed it! If you have ever been knocked back with an electrical shock, you'll appreciate the choice of words. I drove down and got my mom out of Miami while the insanity continues....
Thanks for watching and the kind words...
@@EngineeredAngler YES I HAVE!!! melted the needle nose pliers together..lol... definitely woke me up, and now I take the extra step to turn off breaker!! Always good to spend time with family! Stay safe, things look bad in areas of Florida!
Great video with special appearance from the one and only "abuela"
I told Xander that Abuela would be in the next one...hope they got a kick out of it...
I think de Multi Lure circle is more than enough and you may use it for one or five lures of different sizes. I do undestrand being you as precise as usual in your work for addin a single lure desing. Great!
I build one with your design with some modifications but just for materials. It work pretty well but in time the shaft attached to the motor has been loosen a little so it vibrates during rotation from time to time. The reason why is because the pins are plastic. I intend to change them for metal. I suspect that the abuela is from Colombia due to her accent wich pleases me a lot since I ‘m colombian too.
I enjoy a lot your videos and that is because you are so technical and scientific in your concepts. And being my self a surgeon well I get your explanations relatively easy and apply those to my lures. By the way they are not so perfect like yours but allow me to make some nice captures.
Thanks Franco for your teaching. You are and avid angler and I’m eager to learn and I have achieve that with you.
Thank you, it is very satisfying to know so many are able to use my designs to help them make lures. My wife is Colombian but Abuela is my mom and we are Cuban...almost as good😄
Literally just bought a little motor and was thinking about how to make my turner... problem solved!!! Thank you and perfect timing!
Love it when that happens😆
You're the sensei I never knew I needed. Your content rocks.
Thank you so much!
Great build. Unique design using items easily found. Love the ending.
Thank you. ...
Great in depth video as always Francisco! Very practical for small spaces!
Thank you.
Wow... awesome video with a classic finish. She is a jewel!!
Congrats brah and my best to the family. Stay in the shop!!
Thanks! Will do!
Great peace of kit for any lure maker 👍👍
Thank you
Que abuela más genial!!! Gracias por tus vídeos! Soy gran seguidor tuyo.
Gracias Miguel.
This is an awesome design. Unfortunately schedule 20 pvc is almost impossible to find. If you get create another turner, I’d love to see your modifications using material other than schedule 20
I know, schedule 20 was crap but it was perfect for this.
Agreed, no big box or plumbing supply will carry. And if you do find it, will be in long length and $20 or $40 each
Great stuff. You can use a motor from an old microwave. It is 110 v and the right revs. 👍
yup that motor is actually the same as a Microwave.
Great video, I have really enjoyed watching your channel. Thanks for sharing your knowledge.
Thanks for watching!
Apenas estoy empezando a comprar las cosas para hacer los curricanes, tu videos son muy educativos, entretenidos y buenísimo, felicidades desde Chicago 👍
Gracias y buena suerte.
Very good idea 💡 👍
Great now I have something to do today. Thank you great in-depth video
Hope you have fun with the build...
Can also use the foam at the end for spinning flys after they are epoxied.
Nice idea...
Thank you again nice design.
Thank you! Cheers!
Very cool design but you know I'm already thinking of ways to make it even better. (Just one of several incurable tendencies we share like injuries and messy work station but I'm working hard on keeping things organized as I go like putting back the digital caliper even when I know I'll be using it again in a few minutes. Soup, tuna and coffee cans are key.)
The improvement burden...I know it well
You have such a great channel with such great ideas........fantastic!
Thanks
I have seen dozens of turners, and they are made out of wood. I would be ashamed to do a video on some of them. I like the way you did yours, especially to make it compact for storage. I have a plumbing bin in the shop with all the fittings except the 4 way connector. I subscribed to your channel simply because you're thorough and knowledgeable. Do you have a list of hardware like the screws and wire?
So happy for the sub...welcome. What ever information is on the video and in the description is all I have.
Oh yeah I will have one of these.
Great instructional video, very detailed and informative. I may have to build me one. Now....let's see you throw down on some killer Cuban Sandwiches with a side of tostones. 👍🏼👊🏼👊🏼👊🏼
Yeah man, I'll turn this into a Cuban cooking channel...
@@EngineeredAngler 😄 keep up the good content.
Great job! Thanks
That's a lot of fittings. Nit sure about sourcing the slow motor. May need to setup a gear reduction system using other available motor. Thanks for the detailed instructions
www.amazon.com/gp/product/B07CGD9MS3/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
When you made the insert tube and filled it with resin. You drilled a hole that is parallel. Please explain to the others how you did it, as not to make it a wobble thingamajig. I used to turn pens. So, I used my tube centering drilling jig and drill press to make that perfect in line hole.
I simply found the center by drawing lines across the diameter then drilled it by hand. The motor turns so slowly that even if my hole was slightly off center it would not affect the function of the turner and would be difficult to notice. Thanks for the question.
Can you make a dedicated video as to what coatings can be damaged from the oils on soft lures?
I thought this might help some of the older folks like me 90'* elbow 4 @3/42@1/2
Ts-1@1" and2@3/4"
1 @3/4"cross-coupler
3 --1" to 3/4" reducer bushings
1--3/4"to 1/2" reducer
1/2" endcaps x2
1/2 glue to 1/2 treaded male x1
1/2" female to 1/2" glue x1
1/2" pipe thread plug x1
3' 3/4" sch 20
3' 1/2" sch 40
1/2 " cvpvc pipe and end caps
Thanks!
What about the screws, wire and other things?
The motor would work for building rods
Might be a bit slow for that....
Damn, you should do a background video. awesome to see those old photos! its crazy to see what youve worked on! de donde era tu abula?
Somos de Cuba
@@EngineeredAngler very cool!
Well I went off to HD and Lowes to purchase my material to make allure turner and low and behold neither store carries 3/4 inch sch 20 pipe. So I had to use sch 40 and reem it with a 7/8 drill bit.
Bummer!...I had trouble finding the schedule 20 too...they must be phasing it out or something. Well, good luck with the build...
One more question. As far as the round 6 " disc. Could you show a detailed picture of the lure holder that goes into the six end caps that is permanent lay attached to the disc
The "Lure Bow" is something I designed years ago and get a lot of requests for a tutorial on...just haven't found the time. I'll get to it though.
Great idea & am in the process of making one. I 'm stuck on the headstock @ 8:51 minutes in the video. Can you provide a diagram of the assembly & components used; as for me, it wasn't clear with sizes you're using. Also @ 15.52 minutes. What components are you using for the center connector on the turning wheel? Thank you for your help & video.
Great video, enjoyed watching it. Couple questions for you, why do you use cpvc for your lure holders instead of pvc? I watched most of your videos and am interested in building some of your lure bows, you had mentioned that you would describe how they are made if asked, but I didn't see a video of you making them is there one?
Thanks again for all the videos!!
I know....I've been procrastinating building the lure bows. But, I will get around to it soon. The CPVC is just the right size smaller and lighter that 1/2 PVC.
Great, thanks for the info, looking forward to you next video.
So where do you find the motor? I have an old bbq rotisserie motor but it is way too heavy and occasionally will trip breaker on wall socket. Enjoy watching your how to videos. Thanks in advance!
I put a link in the description for the motor.
Second question! If using the UV resin as top coat on your lures, how would you incorporate a UV lamp with your portable turner?
You would have to get creative 😃
I've ordered the UV resin, looking forward to experimenting with it. Have several lures lined up waiting. My main question going forward is time required under uv lamp I bought. It has 30/60/90 second settings. Wave length is right, unsure about wattage concentration. Will be experimenting with lesser lure projects to shorten the learning curve.
What are the wire hoops you use to hpld the lures for painting and clearcoating?
You can find all of my original designed tools, that I make for lure making, in this play list. Look for the "lure bow"
Lure Making Tools: czcams.com/play/PLEVBv_zywucSwg24p4XiVpkKmK3r07G_I.html
Once again.... thank you for an enjoyable to watch build. They are too few and far spaced.....
Thanks
Have you had any issues with the electric motor heating up with extended use while turning your lures?
The small microwave turn table motors tend to run hot. I have left them running for 30 hours plus and they have survived. I recommend that you check on yours often until you can be sure it is not heating up dangerously.
Good luck.
Thank you for your reply. Love the videos I learn alot from each episode. Keep up the good work.
I follow your leg for that motor and it just goes to a other video of you bending wire for that plug I watched it I don't see the motor in the video
Oh man! I'll fix it.
www.amazon.com/gp/product/B07CGD9MS3/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Sorry for asking you on this video but you're aluminum jig plates for bending your wire what is your thickness of the plates and how deep are you drilling into it to put your 1/8 peg in
You must have all kinds of money.
I wish.