Front Lower Control Arms Replacement part one Ford Fusion
Vložit
- čas přidán 21. 03. 2019
- Please know that I am not a professional mechanic. This is not professional advice. I am merely a backyard mechanic. Work on cars at your own risk.
In this video I walk you through the replacement of the front lower control arms for a 2012 Ford Fusion. The procedure is the same for a 2006 - 2012 Ford Fusion and 2006-2012 Mercury Milan and 2006 Mazda 6.
Please download the Brave Browser using this link brave.com/sco236
Upper Control Arm replacement link • Upper Control Arm and ... - Zábava
To free that steering knuckle, I flipped the nut upside down to protect the threads (you never know if you'll need to stop for some reason or another and put it back together), then I used a propane hand torch on the knuckle to expand it a little bit. No hammers were working, so I used a 25lb dumbbell that I randomly had in my garage. That dumbbell is perfect for the tight space, and it allows you to get two hands on it and really throw it up with good momentum.
Cool video. Will definitely watch other parts
My car pulls to the right after replacing the same part? Any idea whyN
How do you diagnose the ball joints for replacement?
I'm sure you want to hear from Scott...But for me? Torn boots are all I need to see.
Como puedo obtener la traducción al español.
Had this job this morning. Ended up giving up. Ball joint is literally seized up. I had a choice between ruining my tools or walking away from it
Can you please direct me to the second video part2 , I cannot find it.
czcams.com/video/N0oWs7W_dEE/video.html
@@ScottsGarage17 9:54 9:54
You know of parts numbers sir. Or of link to buy of Same parts . please
Terrific videos on the front suspension on the Fusion! I’m curious what kinds of replacement parts do you use? How did they hold up thus far? Where do you buy them? Thanks
Just get motorcraft
Part 2
i didn't see in the video why you kept track of that initial measurement.
Thats for ur alignment
Hard to follow with the camera not facing the parts haha
18 mm fit for me..
In short I'm going to my mechanic
What a piece of sh*t horrible design. Lowering the sub frame some is bs. Thanks for the video dude. Good job.
Why not just burn out the bushings and replace them. The steel doesn’t go bad. Save big $ no?
Cant replace the ball joints on these
Stupid design for the rear control arm bolt. They should have designed an indent or hole for clearance for removing the bolt. That's Ford/Lincoln engineers for you always thinking of the tech that has to repair it lol ;)
Poor video..cannot see what you are doing....
Lack of details , the main thing is to show how to remove the inner side.
Anyway!
Bought a Honda , Ford cars are garbage