When you rattle can, try this.
Vložit
- čas přidán 12. 12. 2022
- Veil Design Co Rattle Can Stencil Pack is perfect for painting your gear, with high quality. The stencil pack is a non-permanent, adhesive-backed vinyl stencil kit. These kits are cut on 12x12 sheets of vinyl and come with both the negative and positive sheets. Achieve the rattle can design you want with ease with our tiered sheet system.
Woodland and Tiger Stripe Patterns come with two 12x12 sheets, all others come with 3 12x12 sheets.
Social Media and Support
[Wise Men Company website](www.wisemencompany.com)
[Instagram: @wise_men_company]( / wise_men_company )
[Facebook: @wisemencompany]( / wisemencompany )
[Support us monthly](ko-fi.com/wisemencompany)
Monthly support gets access to our Discord Channel and more. - Jak na to + styl
Pro tip, if you have a wife who is in to that cricketing cult. You can have her make stencils like these. It’s a win win because it keeps her busy and entertained for a day.
BWAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
Cricketing cult?
@@tsoliot5913 cricut...its a vinyl cutter. You can make decals, etc..
Bought one for stencilsm.ise it for everything now
This is genius, it’s bad enough I’ve been sneaking new guns into my safe lol
😂😂😂
A piece of general advice when using rattle cans, hold the can 12-18 inches away from the piece you are painting, this will help avoid the paint pooling and help give you a more even paintjob. It also helps to do brief strafing passes with the paint instead of doing it piece by piece. For "texturing" I like to use the soft side of a dish sponge and dab it in some paint (not a lot of paint) then apply it to the rifle, but you can use many objects to get cool patterns.
I recommend Rust-oleum's camo line, I've tested it under IR and it is IRR compliant.
I like to spray a base coat, let it dry, and then put sticky tack on top of the first layer, spray a different color, let it dry, and then repeat the process as you go along. I then top it all off with sponge blotching. It turns out pretty well. It also helps to start your base layer from a lighter tan and then make accents in darker tones.
"I'm not the most patient person..." Me thinking it before you even admitted it 😉
Everyone calm down. I’m self aware of my current situation.
Honestly wasn’t sure how this would come out at first but that is actually a pretty damn good looking paint job.
All the hater moaning about not painting their safe queens😂
I knew it was coming.
Their tantrums are hilarious.
Honestly the cone hack is the best part of this video. Lol
The stickers are pretty sweet too.
Sometimes you just have to get creative with the resources you have.
This is much better than the last company I saw selling these.... They wanted like +$40 and up for a couple 12x12 sheets while depending on the pattern u choose there r $15 for 2-3 sheets
That came out pretty good. Definitely a step up from the basic mottled brown and green many rattle can jobs end up as.
Best camo paint job I've seen was done with dawn dish soap
Looks good. The laundry bag and stickers was a great rip! Thanks
Great video, love the minimalist approach.
Love my wrap for my PVS-14 I got from Veil!
That came out great. The effort definitely paid off. I'm sticking with Gear Aid Camo wrap for now, but I'm gonna hop on the paint train eventually.
Hop on the train anytime. It’s a fun ride.
Thank you. I've been doing the typical green, tan and brown with mesh and it looks great, but I'd like to learn new patterns.
Looks amazing, thanks for the tutorial!
Cool lookin paint job for sure. I've always used a variety of browns, tans, greens and grey in conjunction with a sniper veil, works well and very cost effective.
I just got some plastic stencils on Amazon and held it over the firearm and it was so easy and I am so pleased with the way it came out. People thought I bought the gun that way. No need to apply stickers
Stencils are great and easy, depending on the pattern you choose. For a quick “field expedient” way, I like to put a base of a few light colors then use 550 cord and wrap the rifle with mesh bag (onion/avocado/laundry bag). Then spray my darks. The cordage looks like sticks or blades of grass when removed.
DON’T FOR GET TO COVER OPTICS/LIGHT LENSES.
I like the color choices. The pattern is very stencil. It does look good
That’s amazing!!! What a great idea.
looks awesome!
I was a little skeptical at 1st but it came out great
Turned out cool!
Those shorts are awesome. Just painted my AR47 jungle tiger stripe
Awesome job ! Really cool look
Those stickers seems awesome I got to try those out
Nicely done!
Thank you for making the first good camo tutorial
Looks awesome! My first painted M-4 m203 was painted tan with tiger stripes and all I did was cut some claw marks in some cardboard haha. Those stencils are way better.
Great video. Cool product. I still love my laundry basket netting pattern lol
Turned out great
Thats actually awesome
Interesting combination, i wouldve personally gone for a little more of the original black in it. But i think Im gonna do something like this pattern with mine.
The traffic cone was smart AF.
Call it a "tactical painting stand" make it FDE and charge $129.99.
How much is your life worth brosef?
That turned out really cool.
Thanks. Appreciate it.
Like the net bag stencil , thanks for the I fo
I'm adding this as one of my favorite ways to paint a rifle, but the top method for me is still to do a base coat and then mask off for striping of another color and then coming back in and applying the matte paint with a sponge in layers for an extremely uneven almost digital effect. Most effective way I've seen so far of breaking up the silhouette of the rifle other than covering it in scrim.
I thought that was going took terrible! But that is probably the best rattle can job i have seen ! Nice!
I love Montana gold spray paint for rifles and their varnish protects the paint well too, I did mine in their sand to imitate hk RAL8000
Multi layers with dif pattern masking i did a pellet gun to test turned out great however vynyl wraped my 10 22 happy with it and easy to change later,just my input.
Wasn't sure how it was going to turn out but the finish design was pretty cool.
Yeah I dig it too. Something different.
Use dish soap. That makes excellent tiger stripes
Looks bit like German Flecktarn camo.....really nice job, love it!
I paint all my rifles. Looks good. The vinyl stickers will definitely make things easier for my next spray! Last time I made them myself out of painters tape, that sucks to do…
Yes painters tape is time consuming.
“You don’t even have to be good at painting” 😅 tell that to Reno may.
Cloud Defensive! Great company! 👍🏻🤙🏼🇺🇸
Cool. I'm about to paint my gun, and I have similar colors, one dark green and one light, some grey and brown. To blend in with the grass and rocks here in Tennessee. I might have to get some of those stickers
Great $15 investment.
Well done sir
The traffic cone is a good idea,i usually hang them up from the ceiling in the garage but then i get paint all over everything.
Aero lower. Very nice!!
Freedom Stencils is also a great source for stencils, I’m gonna check out veil design though now.
You've inspired me to paint Michaelangelo's "Creation of Adam" like the roof of the Sistine Chapel on this passed out lot lizard outside this here Buc-ee's.
In 200 years when they find your work they will put it in a museum.
Montactical has stencil kits as well idk if they are still around or not but I used their MC stencils 4 or 5 years ago and they were great, and yellow ish so they stencils contrast well and are easy to visualize on the gun
*Freedom Stencils is still around
You were a good advertisement for that company cause they are sold out of everything in their site lol
I did my AeroPrecision AR10 build in Rhodesian camo pattern from Freedom Stencils using Duracoat Badass. It turned out sweeeeet. Was super patient, dried with blower dryer between coats. Has stood up to heavy abuse over 2 long elk hunting expeditions
nice intro ben !
The thumbnail looked better
I’ve had good luck with Brownells Alumahyde.
Sick final reveal 😊
Nice! You should try out some Brownells Aluma-Hyde.... definitely more durable than regular spray paint. Ben using is for some ciao jobs a few years now.
Looks good I'd like to do my Mossberg 590 someday!
Doooo it!
i'm worried that I will get paint inside the gun where I dont want it like on the barrel which might smoke when it gets hot and paint starts burning off?
gonna try it on some cheap pmags first.
I use an orange bag netting. I tap nothing off anymore. Zero F's given. I do use a brush or sponge on area's the paint always comes off at. Wood stove paint works good for muzzle devices.
Cool
Nice
I'm not into rattlecanned guns, but the color scheme is awesome.
I appreciate that you can appreciate.
It looks good after you use it for a while it will look better
Cool vid
I’d never paint one of my guns but I’m totally with you on the logo thing.
I always paint my guns upside down so that when i hang in trees by my knees upside down my gun camo is right side up!
Goblin green? Pretty sure that's the same color i used on scale miniature bases years ago!
Yeah who comes up with these names ?🤷🏻♂️
Actually, camo is science. 😮
Does the paint make the rifle feel sticky? I would love to paint mine, but I'm afraid that the paint will feel sticky 😕
My last couple rifles have been painted using stencils. I won't say the company's name. I'll be using viel from here on out.
I found it looks better with a base coat of matte black. It blends better with the other paint, better than the aluminum black. Also tweezers to take of the stickers
Solid advice.
looks pretty cool
Low pressure spray paint like Montana gold is the best you can get… high pigment quality and concentration really make it way better then your average spray paint brands…
if you like it I love it
Wow I would've never thought that you could use vinyl camo stickers like they do for cerakote! Crazy! I thought those stickers were only compatible with cerakote only! I heard they had warning labels on the package that said "WARNING! DO NOT USE SPRAY PAINT WITH VINYL STENCILS AS THIS CAN CAUSE MASS SHOOTINGS AND MAY CAUSE MORE HARM THEN CAMOUFLAGE "
Can't find that can of goblin green. Brand?
stencils and stickers for firearm painting has been out for ages
Looks like it belongs in jurassic park. Love the design
OOOOOOOOOOOO this is so fucking cool!
I forgot to put the magazine back in, but whatever, A little sticky spray paint inside with the guns critical moving parts wont hurt anything.
Still not an issue.
Your forward bolt assist is missing the knob ...
Way higher effort than when I spray my guns lol.
Nice Rein in the back btw
Appreciate it.
Geez literally everything on your buddy's website is sold out. Do you happen to know what's up? Or anywhere else I can get multicam stencils?
Lit🔥
sure a lot of paint??? looks good
Like these Bob Ross AR15 episodes 😊
You’re too kind.
Im gonna disagree with not painting the whole thing with a base layer first. Even though it doesnt look it the base black ceracote does have a slight shimmer, shine, or reflectiveness to it. Thats why i personally would paint it with a good non reflective coat and then stack the camo patterns on top of it. Just my two cents lol
Looks like an early unlock COD camo.
Just a little tip, ALWAYS HAVE EITHER AN OLD MAG OR TAPE OVER YOUR MAGWELL!!!! The bottom of your BCG is exposed and getting paint on there is not advised!
It should have enough oil that the paint wouldn't stick.. but don't be a Homer and spray right up the magwell and it's fine
Laundry bag is king. This is kind cool though.
Laundry bag is typically by go to and even on this build I couldn’t resist using it a little.
@@wisemencompany love it.
What rail wrap did you have on the one with the eotech? 2:27
Thank you 🙏
Lunar Concepts Hot Pocket sold on our website.
@@wisemencompany thanks! Just found your channel, new subscriber 👍🏻
Very Wicked 😂
Where are the rhodesian camo shorts from?
They are tiger stripe and I had them chopped and sewn.
Has a Viet Nam tiger camo feel