My 2006 Chrysler Sebring GTC Convertible Top Wont Go Up. Can We Fix It. Just Like Brand Used.

Sdílet
Vložit
  • čas přidán 23. 08. 2022
  • Just Like Brand Used. Working on my 2006 Chrysler Sebring GTC. The top won't go up very good. We will be headed to the No Name Nationals in 2022 with the #crustychrysler We buy, fix and sell lots of stuff. We try to give you information. We like to have fun. Grow a garden. Play with the pups. Work on old vehicles. Remoldel houses. rickyallen2021@yahoo.com
    RCindustry P.O. Box 223 Jasper Indiana 47547 #nonamenationals
    #warwagon #powertour2022 #nonamenationals
  • Auta a dopravní prostředky

Komentáře • 39

  • @kevinsutton1812
    @kevinsutton1812 Před 2 měsíci +1

    Thanks for the tip, I have the 2004, so I'll give it a try 😅

    • @RCindustry
      @RCindustry  Před 2 měsíci

      Hope it helps it's been a couple of years since I fixed mine and it's still working fine

  • @mikemorse5047
    @mikemorse5047 Před měsícem +1

    Thank you great video

  • @emwagner
    @emwagner Před rokem +1

    Thank you for this video. I recently bought a 2005 Chrysler Sebring GRC and I put the top down without issues, but the top wouldn't come back up. Had to do it manually. I also have a leak on passenger side for hydraulic fluid, so expect im having the same problem whereby the cylinders need replacing. Videos like this will save so much money as I can follow along and DIY.

    • @RCindustry
      @RCindustry  Před rokem +1

      I am going to be doing a video coming up soon on how to replace the cylinder that I have leaking

    • @emwagner
      @emwagner Před rokem +1

      @@RCindustry I'll definitely need that because I have a leak somewhere, so plan on replacing both cylinders

    • @Terry-mm7tr
      @Terry-mm7tr Před rokem +1

      I have a 2005 sebring the top wont close all the way. I filled to motor with dexcon 111...took the sides off. Noticed passenger side cylinder is leaking. Will replace both hopefully that's the problem 😅

  • @kimberleebarnes2807
    @kimberleebarnes2807 Před rokem +1

    This video was EXACTLY what I needed. Thank you so much. My top was stuck in the open position so we were very limited on where and when we could drive it. This video showed me how to get the seats out to get to the problem and diagnose it correctly. And I was able to disconnect the lines and empty the fluid so I could close it manually while I wait for the new cylinder to arrive. So we can drive the car now. Again, thank you! (Did you make a video on actually replacing the new cylinder, which you were ordering as well? I will need to do that next week.)

    • @RCindustry
      @RCindustry  Před rokem

      Thanks. Yes I made a video on installing the new cylinder.

  • @colinbiddle2649
    @colinbiddle2649 Před rokem +2

    Really appreciate this. My top stop halfway. Gonna try and top it off and see if there is any leaks. If there’s non I’m topping it off with hydraulic fluid.

    • @ericcurtis8547
      @ericcurtis8547 Před rokem +1

      Cool. I'm getting ready to do a video on how to replace one of the cylinders because as the video shows I have a cylinder that's leaking good luck

    • @colinbiddle2649
      @colinbiddle2649 Před rokem

      I still find myself coming back to this video for references. Just got enough money to buy the replacement cylinders. Hoping you might have a video on to replace them. Thanks again!

  • @Grandmas70
    @Grandmas70 Před rokem +3

    My Sebring won't open or close. No grumbling sign. I noticed a electric control on back window is off. Can I just glue it back on. It doesn't even make a sound when trying to close or open.

    • @ericcurtis8547
      @ericcurtis8547 Před rokem

      I am not sure. I'm getting ready to do a second video and install the new cylinder on mine and I will look at the wiring at that point and see if the Window Control has to be intact to make the circuit complete but as of right now I cannot tell you whether it is yes or no

  • @user-rq3qb7xo9s
    @user-rq3qb7xo9s Před 11 měsíci +1

    Mine makes a sound when I hit my switch but nothing happens just been doing it manually lol

  • @masonhulis9586
    @masonhulis9586 Před 8 měsíci +1

    What is the name of the cylinder that you use for the Chrysler convertible top repair? My 2002 Sebring sounds just like the one in your video thank you❤ 19:38

    • @RCindustry
      @RCindustry  Před 8 měsíci

      Not sure on the name I ordered it through O'Reilly's Auto Parts. I wish now I had replaced both because the driver side is starting to make that noise now still working but you can tell it's going to do the same thing as the passenger side did so I would recommend replacing both of them at the same time

  • @sb6510
    @sb6510 Před rokem +1

    my right side of the top doesnt close all the so when i try to latch i have to pull downwards,but even latched the top wiggles because the right doesnt seal properly on the windshield.what could it be?

    • @RCindustry
      @RCindustry  Před rokem +1

      Most likely, mine was doing the same thing

  • @user-bf2bl3hp5p
    @user-bf2bl3hp5p Před rokem +1

    Top opening and closing is not reliable. Does the resting slot for luggage rack in trunk have a switch involved in top mechanism? Top may stop halfway going down or up.
    It's too bad its operation isn't reliable...2008 sebring very nice car to drive

    • @RCgardens
      @RCgardens Před rokem +1

      I don't know about any switches other than the limit switch at the pump, which is mounted behind the rear seat.

  • @gherickb8181
    @gherickb8181 Před 11 měsíci +1

    Heeeeelp my top move well is the trunk get stuck won’t close what I doooo

    • @RCindustry
      @RCindustry  Před 10 měsíci

      Sounds like your lift cylinders are bad

  • @normaroark1255
    @normaroark1255 Před rokem +1

    The top on mine won't go down but will come up, replaced the motor but still the same thing, what can it be?

    • @RCindustry
      @RCindustry  Před rokem

      If the top won't go down make sure that the pump is actually pumping fluid to the Pistons in the down position you could have a relay on the pump motor not working

    • @normaroark1255
      @normaroark1255 Před rokem +1

      @@RCindustry Thank You, did rig up a direct connection with a battery and cables to see if it was the new pump but it works great going up and down that way so i guess next is to order a relay. Thanks again😀

  • @aburawan1199
    @aburawan1199 Před rokem +1

    What type and number of oil is used in the pump?

    • @RCindustry
      @RCindustry  Před rokem +1

      I have not been able to find out exactly what Chrysler recommends

    • @sb6510
      @sb6510 Před rokem +2

      its dexron ii

  • @zacharycampbell9237
    @zacharycampbell9237 Před rokem +1

    When you make the top go up and down it sounds like one of those rhinos.

    • @RCindustry
      @RCindustry  Před rokem

      I know, that's funny. I think it's because it has all that air in the system cuz it's not doing it now

    • @aminumohammed4535
      @aminumohammed4535 Před rokem +2

      Hi

    • @aminumohammed4535
      @aminumohammed4535 Před rokem +2

      I need the hydurlic cylinders Sebring Chrysler

    • @aminumohammed4535
      @aminumohammed4535 Před rokem +2

      How much please

    • @RCindustry
      @RCindustry  Před rokem

      @@aminumohammed4535 I ordered mine at O'Reilly's Auto Parts I think they were around $179

  • @Jail19
    @Jail19 Před 11 měsíci +1

    I just bought mine and one of the sides works decently but is not the best and one side just doesn't work at all and Idk if the pump needs replacing or what

    • @RCindustry
      @RCindustry  Před 11 měsíci

      If one sides working then the pump is working. You probably just have a bad lift cylinder my recommendation would be to replace both of them at the same time

    • @Jail19
      @Jail19 Před 11 měsíci

      @@RCindustry Im taking it to the shop today and hopefully they will give me a reasonable fix