【DIY】2 Styles Panel Saw from a Circular Saws / Hacks
Vložit
- čas přidán 2. 12. 2022
- Amazing device that uses a circular saw as a panel saw.
I made a manual panel saw with a parallel link for easy clamping.
Click here for the plan
jisaku-koubou.com/downloads/d... - Jak na to + styl
There are a lot of CZcamsrs, they all talk a lot, but not much work, but JSK is a mega worker, he doesn't talk nonsense and shows only the best and highest quality work that can be seen, for me he is a complete worker and carpentry artist.
A Track Saw Guide would be my best option. The amount of money spent on this project can build me a house already.
Thats my problem with it. It's too expensive for what it is. If you're tearing down panels over and over again then a panel saw is faster. But for the home DIYer a tracksaw will have more use for roughly the same cost.
@@AERuffy Until you said 'same cost as a track saw' I was in my head saying 'YEAH BUT IT'S THE SAME COST AS A TRACK SAW!' A vertical panel saw comes in at ~£15k, it's seriously hard to come by one that doesn't need 16' of wall space when you're likely not wanting more than 8' of capacity, whilst a sliding table saw will be about half that cost, but take up even more space and provide a ton of handling challenges, whether you're a DIYer or a pro. Being able to make this for 5% of those costs, to your own specifications, fitted to your own costs is why it's worth it.
I couldn't justify a full size panel saw, and in fact tend to rip boards in half with a track saw. Things then slow down a lot when you need to cut a bunch of lengths of 600mm width as you can't use a mitre saw, can't have a table saw big enough to do this safely (and again, radial arm saws are massive). As soon as I clear a little spare wall space though, a 600mm capacity version of this will save me hours of repetitive crosscuts, and probably retire my mitre saw too. Can't see how it isn't worth it really.
WOW! This is the best homemade panel saw design I've ever seen! The meticulous craftsmanship and precision of your work is an inspiration and paradigm for us all.
You can bump that up "best panel saw design". Most of them are just enough to work and even cut really garbage like despite costing $$$$.
The linear bearings and heavy aluminum extrusion rails are going to set you back a bit. Add that and all the hardware and this all $1000 or more.
Je suis toujours ébloui par son travail de génie et trés propre!!!! je guette en permanence ses nouvauté et le remercie a lui de les partager
@@ironmyno I've wondered about this. Is that a truly reliable estimate? I know that the components you mentioned are really pricey, but I've wondered if there are sources at a more affordable price point. Thanks!
ais
What you do in your small workshop is totally amazing. I started watching you back with the paper bird. You have designed some great projects over the last few years. Thank you
Не видел более фантастического, чем Ваша работа. Респект!
No background noise (music), showing straight away the target for the video: «let’s make it.” Excellent!
GENIUS. The world needs your designs to be available commercially.
Yeah if this were a kit you could buy commercially, or even a standalone unit, I think it would do well. Just wait, harbor freight will have one out next month for $129.99
Those 80/20 aluminum extrusions and connectors alone cost more than just buying already built for purpose panel saw. But, still what you do is amazing.
Where do you live because panel saws are F'n expensive and super hard to find? The lowest price I've seen is $1400 and I can buy the 80/20 profiles for a couple of hundred. There's an 80/20 rep in my city... Plus Amazon prices aren't that bad. I call BS!
Here in Brazil unfortunately the import taxes are astronomics. Then, is very expensive either buy ir construct.
I bought an old panel saw in 1990 from a bankrupt lumber yard. I fot the pansaw, a radial arm saw, a table saw, and one hundred used 7.25, 10, 12 and 14 in saw blades. All for 500.00$ American. Sharpened the blades, mounted the panel saw, sold the table saw, and radial arm saw for 500 each. I've gone through a Dewalt circular saw every 2 years. The last one I bought was a Chicago Electric from Harbor Freight.
yes but aluminium have a re sell value and safer than wood
I'm not sure it's all that amazing tbh. Give me this much aluminium profile and I'm pretty sure I could rig this up.
Без слов, а как всЁ понятно, просто, чисто и красиво. Благодарю за Ваши видеоролики укрепляющие любовь к "ДЕРЕВУ"✊
Привет из РОССИИ🇷🇺
Булатный ЛАЙК мой 👍
....и
МАКІТА РУЛИТ ✊
@@user-fx7ic1tw6d RYOBI тоже 🙂
Как тонко подмечено,даже нечего добавить.Согласен с вами колега на все 100👌🤝!Талант не пропьеш!
his style is shouting that he is Japanese. a combination of patience, art, safety with mastery. a Japanese bow down to maker. 🙇
This guy is unbelievably talented. Big fan of this guy.
That is a very clever design. I'm particularly impressed by the modified riving blade used to move the saw. The work clamp mechanism is very clever too.
I originally became interested in your work when I found your ornithopter video - maybe 8 or 9 years ago (wow time has flown 😁) If you were to revisit that project again and show us how you built it, myself, and I'm sure many of your viewers would appreciate it. The workmanship is always masterful, and the designs are innovative in every one of your projects. A joy to watch.
Your hands always seem much younger than I imagine your head to be. Well done!
Projeto incrível, sua criatividade não tem limites! 👋👋👋🤜
You've really outdone yourself with this machine. Incredible job!
Turning the saw around for this application is pretty damn brilliant.
Die Profille zum Führen der Kreissäge erinnern mich an fischertechnik. Tolle Idee und Werkstück. ®️👍🏻
Absolutely brilliant. Thanks for sharing with us!
This is absolutely GENIUS; perhaps one of your best creations. Your magnetic base drill press is a very close second..
This guy Unbelievably smart and a perfectionist, no words necessary in his video’s.
Love watching!!
Every time I see your project I am blown away. You have a surgical and maniacal precision, and the great thing is that the projects are finished in a crazy way. I envy your dexterity and your wit, in a good way of course. Greetings from Sardinia
Pro tip for those of us with older eyes: Get yourself an Optical Center Punch Set. The set I have comes with a crosshair and bullseye sight and two different angled punches. It's so much easier to look through a sight to line up a mark than it is to sight it the old way. Best investment ever.
This guy is absolutely brilliant! Another great build!
I have no more words to describe how amazing your work is...
I haven't seen anything more fantastic than your work. Respect!
Hello from Taipei! You inspired me to make a second tiltable and retractable table saw for myself and then I'll make a third one - which is the panel saw you just made here in this video! All of videos are inspirational from chisel sharpening to circular sander and for years (maybe 4 years) I've watching your videos! I've actually made a "Dowel Jig" exactly the way you made it a couple of years ago! Love that video! Thank you so much!
Thanks for watching.
I will continue to make more fun videos.
As always, stunning attention to detail ... even when you make a mess drilling a hole it looks good ... I love the simplicity and precision of your designs, but with this build I feel that you got overly complicated ... in saying that, I still absolutely love it 👍
Very impressive the homemade tools you construct with limited space and budget is amazing
you really work like a surgeon in wood and metal! wow ...6, 7 years when I'm searching the net/CZcams I never find someone like you
Вертикальный форматно - раскроечный станок. Отличная работа.
Absolutely 💯 the best panel saw build I have ever seen. You should mass produce a panel saw kit and sell them! Before track saws...this is and was the OG for breaking down sheet products. Local home stores seem to always breakdown and are not nearly as nice as yours. I prefer a panel saw over a track saw. Especially 1 like yours. That thing is perfect!
simple, précis , exigeant .... j'adore. C'est une magnifique réalisation
All can say is ... "AWESOME piece of equipment!!! Would love to have one like you've built because you put some great thoughts in to it and seems to work great. First time seen you video but will be checking out others. Very inspirational build and would love to have one like said. Keep up the good work.
One of the "MOST USEFUL" DIY channels for my woodworking shop and IDEAS to make my shop more efficient and/or safer, KOUBOU👍👍. Unlike many others where there is all the music and other distractive content your all details and "SHOW by DOING IT, just love it. You deserve a lot more upvotes but keep up the great work you are doing for the DIY MAKER community. Greetings from the USA
From one expert to another, this is a truly excellent build.
Its a pleasure watching a fine craftsman produce such awesome stuff. living prove of ingenuity. Thank you
Astounding! Beyond comprehension... except for the fact that i just spent the half hour enjoying watching & listening to your craftsmanship. One thing that I would really appreciate on your videos is an explanation on the amount of time it took you to build whatever it is.... having this information would help us earthlings think that you're "one of us". Greg (garden grove, CA usa)
Wow you've outdone yourself. I thought your original panel saw was amazing but this definitely elevates the design.
This is genius and i could see great use for it especially for hardware stores that don't provide a cutting service for sheet material as the other versions of the type of wall mounted saw wouldn't be as safe as this one is due to the blade being exposed the whole time. Therefore insurance is usually the problem. But with this one, its super clever and a hell of a lot safer so I'd imagine insurance wouldn't be as expensive. You deserve all the views and likes you get, master creator. Respect
Отличная идея и блестящая реализация.
Как всегда.
Pretty awesome. I like the way you placed the saw behind instead of the cutting arm. Sweet!
Very nice build! I always thought about building myself a panel saw but I think i'll rather go for a plunge saw at first Because it doesn't take that much space and I can buy it right off the shelf. Although a decent is a bit simpler to use.
8888
That clamping mechanism using simple parallelogram is clever. Not sure about riving knife being used to move a saw around, but it could be OK-ish as I guess you set your counterweight flawlessly so forces will be minimal. Tilting is very nice addon. But what I'm not so sure I like is access to the saw and depth of cut adjustment. As your other panel saw with circular saw on front side allows you to not just format panel materials, but also to scribe and cut groves in them, as it gives more control over the saw settings. Maybe I just missed some hidden lead-screw to set depth of cut here. Nevermind, I like your design style clean definition and videos straight to point.
Beautiful, wonderful, marvelous, glorious. Thanks JSK-koubou.
Im lost for words.Such precision and beauty..WOW!!!!!!!!
으하하하~~완전 대박 아이템입니다요~몇번을 돌려봅니다~~
Love your channel. Your designs are ingenious and your craftsmanship is second to none. The only complaint I have is the price tag for some of the projects is not for the faint of heart. Keep up the great work and I will keep watching.😁
Wow, I really want to make this! I think the only thing I would want is an adjustable “fence” so I could have it half way up so smaller pieces are easier to work with, not sure how easy or hard that would be to make but seems possible.
This plan may be worth shelving my track-saw for.
НУ ТЫ И ЗАМОРОЧИЛСЯ?!!!!
ВЫСШИЙ ПИЛОТАЖ!
As always I wish there was more than one like option to your videos! Thank you so much for sharing!
you are so professional, neither factory is so clean and so high precision. Nice, thank you.
ingenious, resourceful and very well considered. Thanks for sharing your ideas they're always great to see. 👍
Rancangan Anda Sangat Sangat Bagus Kombinasi Kayu dan Logam.
TERIMA KASIH .UNTUK PERHATIAN ANDA.SAYA MAU HADIAHNYA. NAMA DAN ALAMAT SAYA JELAS.
KALAU BOLEH, APAKAH SAYA BISA MENDAPATKAN HADIAH HASIL RANCANGAN ANDA???.SAYA SEORANG TUKANG KAYU.
ALEXANDER BORA'A. JLN.GUNUNG KELIMUTU NO.23 AB.KUPANG NTT INDONESIA.
Great job! So meticulous in accuracy! You are a wonderful person. Your video is full of details and automatically educative. All without words Sir! You're a great teacher! Thanks for Dearing!
great realization of the embodiment of creation...and someone commented that you don't pay as much as the finished product..I doubt it...and the question is about oneself and realizing ideas is not about money but about joy...peace
Several years (three? Four? Five?) I stare on your videos. And not only staring, I've done some of your jigs for router.
Wood in your hand is like clay when you're working, which turns into gold as a result. Excellent work and extremely motivating!
Thank you! (It is so frustrating that I cannot buy your drafts no more due to sanctions, your banks reject my purchase tries.)
I *love* watching these vids. No music, no talking, just beautiful design. My one problem is that a lot of them now require crazy expensive looking components, and that was my immediate thought as soon as the first slider thing appeared on screen. It would be awesome to see builds that don't require one to spend hundreds in components.
I understand where you are coming from, but any panel saw you can buy off the shelf would cost much more than the materials to make this. Also, just because he built it a specific way doesn't mean you have to, maybe you can cut cost by altering the design a bit? Those sliding rails aren't super expensive either.
Precisión y exactitud, da gusto ver lo limpio que trabaja. Felicitación!!!!!
I love this! Definitely adding that to the new year project list!
Saya lebih tertarik sama meja kerjanya sungguh luarbiasa...👍
Thank you for all your inspirations!
Nice to have a beautiful shop with all of the tools AND the skill to do all of this. Its not for us week end project guys.
He will spawn a new field called carpentry engineering. 💯
Superb build. You're always making genius pieces with your own genius tool accessories
Looks great! Better than made in factory 👍
Respect from Russia 🤝
Seguro que es un tutorial espectacular maestro, como todos los que usted hace, pero es muy largo, se hace difícil de ver, lo ideal para mí son 15 minutos máximo, partiéndole en dos, creo que tendría más visualizaciónes, solo es mi humilde opinión, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia)👌🤓😜
Greetings from Hannover, Germany, i really love to watch your master craftmanship!
Wow, you did a great job on what I was looking for.
I think it's probably a solution that you will make after a lot of thought after the first product. A really great solution.
Man, you're so cool. I love your projects. I would like to see a couple of modifications to the panel saw. Can it be modified to do rip cuts and could a razor knife be added to cut coroplast and beveled mat boards? Just a thought.
Estraordinario trabajo, felicitaciones y gracias por compartirlo! Saludos desde Colombia!
Impressionante la precisione e i materiali Bravissimo!!!
Well, that's really on another level.
But pretty expensive to build though, considered the materials used.
Thanks for sharing!
I would have to agree. By the time you purchased all the 4 linear bearings, the steel shafts, aluminium extrusions, aluminium plates and all the connecting hardware, this is an expensive project.
Thank you for sharing your video are so professional that it does not need a voice .
Love it thank you
Parabéns, isso realmente é um projeto super incrível. 👏👏👏👏👏
4r6iuthhb:
.. "#
Outstanding. Simplicity with functionality, also because it's cutting towards the back you don't actually need clamps more than the gravity guide. 😁Ingenious! Damn, I get goosebumps every single time I'm watching your videos.. Must be definitely the almost sterile environment combined with tool sounds... Brrrr...🤐
Es macht immer wieder Freude zuzuschauen
Un gran trabajo, digno de replicar.
EXCELENTE
Super gemacht!!!
A work of art…congratulations 👍👍👍👍
WooW, incredible idea and extremely well executed !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SO CLEAN! Bravo, sir.
everything you do is very creative it is a pleasure to observe the high quality of your inventions thank you very much.
bạn đã tạo ra 1 công cụ tuyệt vời trong ngành mộc! Kĩ thuật cao!
That's one of the smartest build I ever seen
十年才出現的天才！❤❤❤
Criatividade sensacional, parabéns continui fazendo um belo trabalho!!!👏🤌👍
That's the best panel saw I've ever seen awesome. I did see you using compressed air and thought you need something like the Makita brushless handheld mini blower or similar.
Why use a new tool with a battery when compressed air is already available in the shop?
Um, this has to be the best build I've seen in a very long time. When can you come around and help me? Greetings from Australia.
Another genius idea, this profiles are quite expensive to get, but idea and realisation perfect as always man !
Let alone these heavy linear bearings
Most of the aluminum rails and brackets could be replaced with wood. The aluminum just makes acquiring long straight pieces simple for the project. I'd probably laminate plywood together where needed.
Эх классный станок,отличная работа мастера и классное качественное видео ,купил бы такой себе!!!может кто то сделает ????нахожусь в Москве
Muito bom ! Parabéns.
Superb work! I can't like this enough!
Another great build!
I'm only 40 seconds in and I already want to make one for myself! It's damn clever!
Congratulations ! Very well done as always ! 👏👏👏
Ролик вышел в Ютубе несколько минут назад (9минут), а Ваш комментарий несколько часов назад (9часов)🤔😲Как такое возможно❓
I have a limited release 9 hours ago.
@@jisakukobo Спасибо за ответ ✊
You are a genius.
Nice work! I thought about making one of those for my shop until I saw the Festool Trac-Saw. Once an affordable version came out I bought it. A panel saw would be great if I had the space.
Beautiful design and execution. I was wondering what is the benefit of a panel saw compared to using a track saw or a straight edge. It seems easier to me to cut on an horizontal surface.
A panel saw is going to be great if all you need are perpendicular [ T ] cuts across your work material. A track saw gives you the added benefit that those cuts can be along any angle across [ / / ] your material. Additionally, the track saw can be set to cut a bevel where a track saw cannot. A track saw has the material horizontal versus the panel saw with it more vertical. This means a track saw requires more shop space for cutting. Hope this helps.
Super réalisation. BRAVO !