Make a jig that increases the accuracy of the electric planer by 10 times.
Vložit
- čas přidán 26. 03. 2023
- Click here for the plan
jisaku-koubou.com/downloads/2...
"make Height adjustment slider jig" is included in the plan above.
Improved the 2nd generation rig system to make electric planer easier to use.
• Amazing ways to use ha... - Jak na to + styl
I hope the video is meaningful to you.
If you like the video, please introduce it to your friends and social media !
J'ai acheté le plan, j'aime beaucoup ce que vous faites !
Verry good job. We are waiting for a small diy bandsaw realisation. Thanks
@@valbondaho7220 I would like a woodworking portable band saw that isn't $6k USD 😅
Too much work
А не проще купить рейс мус?
Yet more superbly designed jigs ... the last jig especially is a work of art 👍
I can't get bored watching this guy work. Very impressive and ingenious ! I would like to have one quarter of his talent .... geeees I'd be good !! 😀
I truly enjoy watching your videos. I learn something new every single time. Thank you for your time and creations.
Превосходное владение инструментом, познания в механике. Отличный симбиоз умной головы и умелых рук. Продолжайте, пожалуйста, полезное и увлекательно видео!
Trying to build this in the US with products available here... Spent 6 weeks of building and rebuilding, and rebuilding, and rebuilding the last one. I just couldn't keep all the joints on extrusions from shifting out of square. I went through 16m of 2020, 3 taps, an unknown number of m5/m6 bolts and tnuts, jb weld, sugru (which is garbage) and destroyed my Bosch 2632.
In the end, I could've bought a jointer for the same price after the cost of the first build.
Well yeah well after jointing and planing thousands of board feet quickly,accurately and efficiently it fun to sit back with a coffee and watch these cool builds heheh
This is a really cool design! My only suggestion would be to lock your adjustment reel somehow so that the vibrations can't possibly cause it to drift while in use
Since you like RC models, I thought you had built a wardrone when I saw the miniature of the video.
36,19min of pure perfection.
I am glad that you are not putting your skills at the service of evil.
Domo Arigato Sensei.
Great idea , nice construction! When we build Maschines at our company we additionally use Nordlock washer’s to secure the bolt connections
You Sir, are truly a genius! Thanks for sharing those great pieces!
Чухня какая то...все делается проще.
Молодец мужик. Я уважаю таких людей и снимаю перед вами шляпу. Приспособы уникальны твои, на это можно любоваться и радоваться, особенно когда ты сам это сделаешь. Сколько не смотрел магазинные всегда много недостатков в них, лишь-бы купили, а не доработки промолчат или ещё раз купите. больщущий тебе Лайк👍 и крепкого здоровья тебе.
Дорогой друг, уже несколько лет восхищаюсь вашей изобретательностью и работоспособностью. Спасибо за познавательные и увлекательные видеоматериалы. Очень многое перенял от вас в своём хобби.
This gentleman is the epitome of "working smarter not harder" 😊
One day, someone is actually going to make a video of the finished product and what it does in the beginning of the video to determine whether we want to invest time watching a whole video to find out if we are even interested in what the thing is going to do. Yes, I get there is a fast forward button, I just dont understand why youtubers dont get the concept and just start building stuff without first showning the completed project. Seems they'd get a lot more views if they started off showing what the thing does and show it being used and THEN showing the build process.
I'm very impressed by your innovation and creativity.
I'm only 40 seconds in and have picked up a trick! Thanks :)
JSK "takes the cake". VERY few could do what he does easily. Thank you kind Sir. We❤you.
JSKは「ケースを取ります」。彼のすることを簡単にできる人はほとんどいません。あなたの親切な先生に感謝。私たち❤あなた。
Never cease to be amazed.
Amazing idea with the bolts sunk into the wood!
Cómo siempre, un placer. Lo he visto ya unas cuantas veces, como todos, y disfrutar de ellos. Gracias!!!
ESPECTACULAR proyecto maestro, usted está a otro nivel, en todos los sentidos, gracias por compartir tanto ingenió y creatividad, un cordial saludo y por supuesto un merecidísimo like desde Narón (Galicia) 🔝👍💪
pues a mi me parece la gilipoyez mas absurda construida. pa eso te compras una regruesadora barata de 200 euros y dejas el trabajo 10 veces mejor. saludos desde asturias
Судя по расходке на этот девайс можно уже рейсмус приличный взять )))
This channel is a DIY channel. The problem is that not all of us are able to even buy the materials in his videos.
Still a cool video BTW.
Your channel is a brilliant! Thank you for your works!
A beautifully shot and edited film, thank you. 😀
Сделал себе самый простенький, вот такой 4:05 пока хватает. Вам конечно же спасибо за идеи 🤝
Очень классно! Глядя на это испытал настоящее эстетическое удовольствие! 👍
Eu também!
Love those planer funktions 😋
The threaded holes you made in the rear part of the planer composite casing, are the Achile's heel for all the system. Otherwise, perfect as usual.
If he were taking it on and off it would be a problem. But if this is a permanent adapter I bet it holds up.
Other way is to glue a block shaped to the rear of the tool to give a connection point. I've seen that online.
What if the bench is not 100% flat??
@@ZeldasGhost depends how not flat. If it's a divot it won't make any difference. If the surface is twisted what you're planing will get the same shape. But in general when you're planing something like this you need a flat reference surface. Many wood workers use a torsion box for worktops and assembly tables for that reason.
Вау! Что за лев этот тигр! Собрать кондуктор, потратив на конструкционные профиля стоимость нормального рейсмуса, или фуганка! Это особое направление в DIY видео!
That second jig seems so much better than the router slab jigs that take hours and hours
This is not designed for slabs though, just boards narrower than the jig itself.
A router slab jig can do things this cannot.
Superbe. Si j'avais eu cette solution plus tôt, je ne me serai pas acheté une raboteuse dégauchisseuse. Top solution.👍 Pour la suite, je suis plutôt réservé car le coût des matières premières est prohibitif. Mais très belle réalisation. Votre inventivité n'a pas de limite👍
Bonjour bravo pour l'exécution très proprement réalisé. respect !!!!
Super gedacht geplant gebaut, wer jedoch alles Kaufen muß und nicht viel Freude und geschick am Bauen hat kann gleich was passendes kaufen,
Bleibt gesund gruß Dieter
Perfeito!!!... Parabéns!!!... excelente trabalho e com muita limpeza!!!
Ups, da hab ich aberr jetzt meinen Schreinermeister gefunden! Ein richtiger Perfektionist. Ich bin mir sicher, dass ihre Ansaetze mir hier in Indonesien sehr hilfreich sein werden, meine eigene Schreiner-Werkstadt auf Vordermann zu bringen. Gratuliere auch zu ihrem Erfolg auf YT, sensationell.
Ich meche hier in Brasilien auch só ein selbst machen,ich wonen hier in Mato Grosso land Primavera do Leste stadt.
@@ruiritter4822 Hello Rul! From what I heard, Brazil, under the new president, has changed negative. How do you experience the rule of the new president?
Fabulous as always. Have you ever considered a small, 25mm wide belt sander? With all the metal you process it would speed up deburring.
Esse cara e simplesmente fantástico,de uma perfeição indiscutível, parabéns nosso amigo
FICA MAIS BARATO COMPRAR UMA DESEMPENADEIRA ESSE DISPOSITIVO E 4 VEZES MAIS CARO , TRABALHO BONITO MAS NÃO FUNCIONAL
I have watched 3 of your videos in a row. I have seen enough. If you do not live in the US, I can get you here. I have a buddy who works on the border, and another who works at the US Patent office. I will support you and your family. In exchange, you may allow me 25% of your patent royalties ... 😄😄😄
PS. You are 1 in a million. Keep up your great work!
Why on earth would you think any sane Japanese would want to move to America?
Excellent as always. A bit to complicated for me but i enjoyed your video , and cleaniness
your tool creations are amazing, and Ive built a couple of them so far.
what I would love to see, though, is a suggested 'Order of Operations' in tool creation.... so what should I build first, to build second, and so on..
ie: drill press, then track saw jig, then planer table top adaption, etc etc
love your work, it's fantastic
I think go with what you will use, yet also be aware some designs are superceded in his workshop and thus mean you have a choice of how you want to proceed (eg the panel saw).
Lost for words.AMAZING.If only I can afford the material.😢😢😢
Лайк за красивую работу и старания. У меня бы не хватило терпения такое сделать, я наверное бы на маленький рейсмус копил.
Идея отличная, чтобы не таскать всю конструкцию, переверни добавь прижим, и получится рейсмус односторонний.
Maravilloso trabajo. De mayor quiero ser como tú.
Felicidades
This is impessive. You are usually very detailed but in this case you have not checked any of the attachments for square or level to surface. This is important for planning. Also no subtitlex describing the components. You want everyone to buy the plans to get any details. Very clever and commercial minded.
Considering the planer plus a cost of rods and aluminium on that jig, just buy a fine thicknesser instead.
A good idea and neat execution.
Due to the design, a high degree of accuracy will be required so that the guides run smoothly over the entire adjustment range.
One or the other improvement or simplification will make the replica even better and easier.
For example, by adjusting the distance on both sides to the available belt lengths and belt pulley diameters, the tensioning device for the central connecting belt could be omitted, as with the two lateral belts, but then the device might not be quite as compact and might no longer fit into the overall system see in the other video.
It's nice to see the tricks used and other tools that were probably also self-made, such as a pillar drill and marking gauge.
Of course, also as suggestions for your own ideas and solutions.
The lack of annoying background music is also very pleasant.
A list of the parts required and the lubricants and adhesives used would be nice.
Хорошая идея и аккуратное исполнение.
Из-за конструкции потребуется высокая степень точности, чтобы направляющие ходили плавно во всем диапазоне регулировки.
То или иное улучшение или упрощение сделает реплику еще лучше и проще.
Например, регулируя расстояние с обеих сторон в зависимости от доступной длины ремня и диаметра ременного шкива, можно отказаться от натяжного устройства для центрального соединительного ремня, как и для двух боковых ремней, но тогда это устройство может быть не таким компактным и может больше не вписываться в общую систему, см. в другом видео.
Приятно видеть использованные приемы и другие инструменты, которые, вероятно, тоже были самодельными, такие как дрель и маркировочный калибр.
Конечно, также как предложения для ваших собственных идей и решений.
Отсутствие надоедливой фоновой музыки тоже очень приятно.
Было бы неплохо составить список необходимых деталей, а также используемых смазочных материалов и клеев.
Eine gute Idee und saubere Ausführung.
Konstruktionsbedingt wird eine hohe Genauigkeit erforderlich sein, damit die Führungen über den ganzen Verstellbereich leicht laufen.
Die eine oder andere Verbesserung oder Vereinfachung wird den Nachbau noch einmal besser und leicher machen.
So könnte z.B. durch Abstimmung des Abstandes beider Seiten auf lieferbare Riemenlängen und Riemenscheibendurchmesser die Spannvorrichtung des zentralen Verbindungsriemens wie bei den beiden seitlichen Riemen entfallen, nur wäre dann die Vorrichtung ev. nicht mehr ganz so kompakt und passt ev. nicht mehr in das Gesamtsystem, zu sehen in dem anderen Video.
Schön zu sehen die verwendeten Tricks und vermutlich ebenfalls selbst gebauten weiteren Hilfsmittel wie Ständerbohrmaschine und Streichmass.
Natürlich auch als Anregungen für eigene Ideen und Lösungen.
Sehr angenehm ist auch das Fehlen nervender Hintergrundmusik.
Eine Aufstellung der benötigten Teile und der verwendeten Schmier- und Klebstoffe wäre schön.
*"other tools that were probably also self-made, such as a pillar drill and marking gauge"*
If you go back through his early videos, you'll get to see how he made all those items.
@@Garryck-1 I've watched a few more videos now and I'm impressed.
Это как выковыривать экскрименты пальцем вместо того чтобы просто посрать. Есть же рейсмус. И, вряд ли, будет дороже, чем это восхитительное приспособление.
Fantastic video Great work !
Awesome idea 💡, Thank You for a amazingly informative video 😎
👏👏👏👏👏 sencillamente fabulosa idea, felicitaciones por su calidad de trabajo e ideas .....
Great work, as always
This is a lovely design and it looks incredibly well made but for the cost of all the materials and the time to make, I think I'd just buy a thicknesser
Or two….????
Dear JSK-koubou, in my onest opinion, Perpetuum Mobile is less complicated then your electric planer jig... Anyway, excellent work!
自宅にプレーナーや自動カンナがあったらと思う夢が急に現実感おびちゃう
Léonardo Da VINCI !!! BRAVO MAN !!!
Fantastic jig (can you even name it like this? ), great execution and thank you for sharing the whole process. I've been thinking though - electric planner by itself is more of rough work tool, so, why do you need this level of accuracy for it?
Dafür, was die Teile kosten, bekomme ich eine Abrichte die besser funktioniert. Dein handwerkliches Geschick ist phänomenal. Respekt
Офигенно,... Тока где найти всё эти материалы? И сколько это по баблу выскочит?
Ну.. Кроме фанерок... И не благодарите!
Лучше переходите в раздел изобретателей.
Hello, which kind of tape do you use to attach temporarly the wood to the table that's so easy to remove? Where can I buy it? Thanks and congratulations for your inspiring videos
Благодарю за труд и полезную информацию ✊
Булатный лайк мой 👍
Bu nasıl bir yetenek süpersin üstat
Muito bom ! Perfeito.
Больше, хочу больше….. как всегда Мега залипательно
Как всегда - МЕГА КРУТО!!!
这是个非常好的主意。我已经记下了它，并将很快复制它。非常感谢你，并致以来自奥地利的亲切问候。
Never thought i'd say this but that's some space age jig.
Yet another great video
absolute genius
One advice I learn working for Japanese corporation: always use washer and spring washer when you use bolts. If you don't use washers then use blue Loctite.
Isso é muito bom. Perfeito.
Eres un máquina haciendo o construyendo maquinas
Those are some great solutions for someone who doesn't have a stationary jointer.
Браво перфектно 👍👍👍
Hi
Great work. Can you please tell me which clamp you use? Mein which manufactorer. Kind regards
Geniale...come sempre.
What oil are you using for drilling that metal?
I want these, they are amazing
Hello master! I enjoy and enjoy watching your videos! Looking at your straps, I bought myself the same ones! I was also interested in double-sided tape, which you use in almost every project you do, could you share a link where you can buy it or tell us in more detail what kind of tape it is ?! Thank you in advance!
bravo, a manual thicknesser, although with tape !
Incredible Super- and really useful
Проще было купить хороший настольный рейсмусс широкими ножами . Руки на месте и голова в порядке
Impeccable execution of the project as always, but the high cost of materials is not worth a simple planer
It is. Simple planer became a precision equipment. Def worth it.
@Jsk @22:34 have you tried the polymer linear bearings? There is no oil or grease, and sawdust is not a problem.
Can you give us some more details of those polymer linear bearings please?
Отличная работа. Ну а толщина готовых изделий и должна отличаться. На самом кондукторе у вас наклеен двухсторонний скотч и липкий только с одной стороны, а на заготовках с двух сторон.
А у меня ГЛУПЫЙ ВОПРОС-- а для чего такая точность на бруске дерева... Провёл один раз на столе с пилой и ВСЁ!!! На хорошем столе точность +_ 0,2 мм, а ТУТ целый проект-- из пушки, по воробьям!!!
Genius!!! ❤
if you added measuring like a thickness planer has this would be a good alternative to a traditional electric thickness planer for half the cost!
I made the previous version of this and I’ve used it to plane some large beams - it works great.
I love the creative addition to this tool, but isn’t it becoming quite large?
🤩🤩WOW Thank you🤩🤩
It's like cracking a walnut with a JCB..... I like it 😂
Thnks fotlr sharing😊
Thanks 👍
Этими усилиями,можно сделать хороший рейсмус.
Es una autentico placer ver la perfección del diseño y la pulcritud en la realización. Te sigo desde hace años y llego a la conclusión de que seguramente eres hijo de Elon Musk, es la única forma de entender el gasto en materiales. Solo tu gasto en cinta de doble cara duplica mi presupuesto para materiales.🤤🤤🤤
Impossible to download pdf "gabarit-de-glissiere-de-reglage-de-hauteur".
Yet I bought "plan 2nd generation electric planer rig system".
Thank you for your help.
Dear sir , if I try to make your idea, can you put all measurements on your videos? Thanks 🙏
Turkiye den selamlar no 5 Harika süper Başarılarının devamını diliyorum Saygılar Sami güç...
Хорошо когда есть набор из всех деталей для сборки
EXCELLENT 👏👏👏👏👏👏👏👏 EXCELLENT VERY NICE