16 Amazing woodworking hacks
Vložit
- čas přidán 1. 06. 2024
- I've collected 15 useful woodworking hacks.
Click here for the plan
jsk-koubou.stores.jp/
0:00 [No.1 Fine adjustment jig for machining the trimmer groove]
3:12 [No.2 Hack to keep the trimmer height constant]
4:53 [No.3 Technique for gluing urethane pulley belt]
6:19 [No.4 Surface correction using trimmer]
7:13 [No.5 Tricks to avoid losing the spray nozzle]
7:57 [No.6 Idea for fixing the whetstone]
9:46 [No.7 Sharpening jig idea]
12:04 [No.8 Clamp idea using rubber]
12:56 [No.9 Idea for removing worn screws]
13:15 [No.10 Hole drilling modification idea 01]
14:20 [No.11 Hole drilling modification idea 02]
15:00 [No.12 Stand that makes it easier to use adhesive]
15:43 [No.13 Ideas for when materials slip with adhesive]
16:36 [No.14 Simple circular saw jig idea]
17:52 [No.15 Idea to hide screws]
18:57 [No.16 How to make a sandpaper holder] - Jak na to + styl
I hope the video is meaningful to you.
If you like the video, please introduce it to your friends and social media !
I always appreciate your videos. They are clean, clear, and full of great ideas. Here are a couple of products that you could devote entire videos to, as they are *SO* helpful around the shop but few have even _heard_ of:
Self-fusing silicone tape: Originally developed by the US military back in the fifties to protect the wiring of their F4 fighters (and why it is sometimes called 'F4 Tape'), this tape contains no adhesives. Instead, it sticks only to itself, fusing into a single layer of silicone. (It comes with a liner that is removed before applying.) While it isn't incredibly hardy--it is a soft silicone with a hardness rating of 50, after all--it can handle *incredible* temperature ranges (-60C to 260C), pressure (750PSI), and voltage (400 v/mil). It also works well for adding grip to tools/etc. To find the good stuff--there are *LOTS* of garbage versions out there--look up its milspecs: 'A-A-59163' or 'Mil-I-46852'.
Polycaprolactone (PCL): This is a form of thermoplastic that melts at only 60C(!) and only becomes sticky at around 70C. That means you can drop it in a cup of hot water, wait until it is transparent, then mold it like putty into whatever shape you want. (I've made everything from wall anchors to pin wrenches to knobs to wingnuts to various mounts.) If you then want to stick it to something, dip that end into hotter water until it goes clear and sticky, then press it into place. Even better, you can reuse PCL as many times as you want. Once cooled, it has approximately the strength, toughness, and flexibility of nylon, which makes it *very* handy. If you look it up on Aliexpress/etc., you'll see that you can get a 250g of it--plus pigments to colour it as you wish--for around $12 or a full kilo + pigments for around $40. (FWIW, many hot glue sticks contain a significant amount, so trying dropping what you have in hot water and see what happens.)
This video is a goldmine for DIY enthusiasts. The hacks are clever and cost-effective. I've learned so much in such a short time. Highly recommended!
Ща, разбежался шарить. Немеренное кол-во оснастки для изготовления этих, так называемых "шедевров". На хера такие ролики? Только денег попытка срубить на рекламе...
😅😮😮😮😮😢😢😮😮
There's no limits to your ingenuity, sir. Excellent video, as always.
とても役に立つものばかりでした。ありがとうございます。
Thank you for this amazing video! The 16 woodworking hacks are incredibly useful and have given me new ideas for my projects. The presentation is clear and professional, making it easy to follow even for someone who is just starting out. I appreciate the time and effort you put into creating this content. Your tips will save me a lot of time and trouble in my future woodworking endeavors. Keep up the great work!
More excellent tips and tricks! Thanks JSK! 👍👍🔨🔨
Some very creative hacks. Thank you for sharing.
Спасибо большое за то, что делитесь своими знаниями и навыками. Всегда восхищаюсь вашей работой и изобретательностью. Привет из России.
Специально поставил на паузу,чтобы написать....
Ты создаёшь качественные короткометражные фильмы, радуешь глаз)))
O senhor é muito inteligente, fico maravilhado quando vejo os seus vídeos, parabéns que Deus lhe continue dando essa inteligência.
Sou seu fã
Abraço.
Thanks for your comment
Amazing skills. Thank you so much for the tips.
Очередная группа вроде бы и простых, но очень полезных советов👍
Always excellent ideas and jigs. You make us better. For improved belt welding alignment: route a V groove in a board and a small cross dado deeper than the V groove. Use the heated blade and weld in the middle of the dado and push the ends together along the V groove as you withdraw the heated blade.
excelente vídeo muito bom adorei o gabarito da tupia
Perfectoo muy bien gracias x compartir saludoss desde Atizapán de Zaragoza edo de México
Wonderful as always 😊 thank you
Very useful tips. Thank you 🙏
Thank you for the video. I really liked the number 7. I will be making that one soon. 😊
Yes, I also have a plane that is badly in need of love and attention.
Muchas gracias por compartir cada uno de estos trucos. Excelentes trabajos, excelente canal.
Dicas muito boas, valeu !
素晴らしい仕事 .argentina
Very impressive skill with the chisel around 17:56!
thanks
Excelente gracias
Золотые руки, настоящий мастер с большой буквы.
Todos bom parabéns
thank you.
Always thinking of ways to innovate. So clever!
Ein Kanal der absoluten Spitzenklasse ! mit immer neuen Tipps für jederman ,der Spaß an Kreativen Handwerk hat -> Danke dafür 🤗🏆
Perfect!!!! Moc děkuji za nápady! Jako vždy perfektní.
Excelente vídeo 👏🏼👏🏼🇧🇷
Muy buenas ideas, buen vídeo. Te felicito. 👏👏😉
Bom dia.
Trabalhos de excelência.
Boas dicas
Great, good idea, thank you
Excelente vídeo
Always clever ideas, great video.
O melhor!
amazing, youre the grandfather of technical and practical youtube woordworking videos!
Muito bom ! 🇧🇷
Великолепные лайфхаки!👌
Sencillamente fantásticos!!! tus vídeos mis respetos y auguro extraño tos para usted sin dudarlo. Fraternal saludo. Néstor
Auguro exitos
I can see number 15 confusing the hell out of someone trying to figure out how to separate the 2 pieces. Brilliant!
¡Wow Gracias!
No 8, 15, 16 👍 He must be a genius.😲
Настоящий мастер!
Very very interesting! Compliments from Genoa Italy
Excellent, Merci
Good day Sir! A request, if possible- as a dedicated viewer for over 4 years, I would love to see the room where you store all of your creations! Are you an engineer by vocation? I am on old man in Arkansas, USA and thoroughly enjoy your work! Sincerely!
Very nice, thanks 👍😁👏
JSK incrível
Satisfying to watch.
Very , very useful tutorial ...❤❤❤domo arogato🙏
You just need to start with the forstner drill bit, when you want to make a recess for the screw,. The forester bit leaves a center point at the bottom, where you can set the drill for the screw drill bit. Then there is no need for all that extra.
that's why I do👍
This solution works great if you drilled too small of a hole or later decided you wanted larger hardware thru something. It also works great if you need to make a slot or oblong hole
@memory_null Yes You're right
Nice work man!
Simply superb
Thank you! Those were great
What a great invention the router adjuster
I like your perfectionist. Greetings from Poland 🙋♂️
Todas ideias são boas, mas gostei mais da 9 e 15.
Excelente trabajo.....🇲🇽🇲🇽....
Thanks for your comment.
Magnífico 💯 puntos
1 word : AMAZING bro.. tq from Indonesia
Some pretty cool ideas!
Brilliant! Out of all the CZcams videos, your’s are the best.
Nice job, we like these tip compilation videos. We shared this video on our homemade tool forum last week 😎
OVER the Top!!!
Thanks for your comment.
Thanks JSK 😊 Giorgio Carraro
Thanks for your comment.
Vaya artista!!!
Well done, liked all of them 😁
thanks
木工に役に立つ16ハック..素晴らしい、最高のビデオ...非常に便利で役に立ちます、常に成功します...伝統的なインドネシアの金の探求者からのご挨拶 🇮🇩😍🙏💗
Thank you.
Your channel is interesting too.
I hope your channel develops as well.
Great!
thanks
Dude, you rock!
I'm a fairly longtime subscriber to your channel and have to say I learned something -- that #15 trick is something I never thought of. It would have to be only on the end grain of soft woods (maybe hot water/steaming for harder woods?), but still, very clever! I have a thought on using sawdust to prevent glue slip -- use table salt instead. Salt will crush under pressure without affecting the strength of the glue, where that sawdust will retain its shape with hardwoods, and if one is building up thicker panels, you'll have to plane down any proudness.
Table salt creates weak joints. It draws out the moisture and prevents the glue from penetrating the wood. This was proven by a gentleman using strain pulls to show the breaking points. Fine sand actually worked the best.
I knew of three methods: salt, sand, and wood chips.
In my case, I decided that wood shavings made sense. However, there is no objective basis for this.
Comments are a very useful way to exchange information.
Please, make a pile box hive for bees, japanese stile, but innoving what you prefer. Thanks
Sus artilugios para trabajar mmm! they are ok pero ud. Lo quiere hacer todo muy perfecto 🙄🙄 y con piezas que solo ud. sabe donde conseguír y en ese caso mejor lo busco en línea y me evito todo ese trabajo milimétrico🤪 señor gracias😁
Queridos que Deus abençoa nossa noite. " Persianas e Cortinas Facilflex Abrindo Suas Janelas Para Um Mundo Melhor" São Carlos Sp Brazil.
Só idéias mirabolantes do cebolinha
Biautiful
I love the first tool! Is there an easy way to adjust the screw for a precise measurement? The video doesn't indicate how you determined the screw setting for the second and final pass when making the slot for the plywood panel.
Ottimo video grazie di tutto👍💯💪
Respect
Настоящего Мастера можно понять и без слов.
Благодарю за ролик
Булатный лайк мой👍
Тебя можно узнать по комментарию, под разными каналами
@@dockerbeat приветствую✊. Да, по своему выкрутился от обезличивания человека со стороны ютуба)))
Very good tips. Can you please tell me what the white powder is that you put on your Naniwa diamond sharpening stone?
That is much better than off the shelf honing jigs.
Always interesting and no noise or idle chatter.
When drilling wood I always drill the larger hole first. The dent of the centering tip gives the mark for the deeper hole.
That's something everyone knows.
Besides, have you ever made a mistake in the size of the hole?
Cool...😊😊😊
Domo Arigato Gozaimasu O’JSK
Thanks for your comment.
👍👍👍 top job 👍🐝😀
thanks
En serio me estás diciendo que le agregaste un sistema de ajuste rápido al ajuste rápido ya existente!!!
自分の小さい頃のノッポさんの「出来るかな～」思い出して、音楽が聞こえてきた（笑）
あーそうか！確かに影響受けてるかもしれません。
と、同時に、もう一種類のハックを編集し忘れていたのを今思い出しました。
次回の動画で紹介します。
Maybe you will build small DIY CNC??
#4. You could have just set the router bit flush with the foot plate. Set the router on the surface with the bit beside the plug. And done exactly the same flush cut in exactly the same way, without the addition of risers.
👍👍👍
Номер 2 👍!
Slt, quelle longueur ? Merci
13:35 Pro Tip, Always drill the large hole first.
Everyone knows that.
This video is an idea for correcting design mistakes and work mistakes.
Subarashi ! 🙏👏👍💪
Здравствуйте скажите пожалуйста какой клей вы наносите на магнит.
No. 3 is the material rubber or neoprene?
which white material do you use when sharpening?
It's alumina.