How To Remove Your Honda C50, C70, C90, C100, CA100, Passport, Cub, Wheel The Easy Way
Vložit
- čas přidán 16. 03. 2021
- There’s a lot of videos online for the difficult mechanical jobs, so I make videos of the easier tasks. I remember starting out, with no knowledge and no one to help me, I found it so frustrating not knowing how to do the easy tasks, like removing a wheel to change a punctured tube.
This came in handy this evening when doing some maintenance on my c90. Thanks
Try to put air in the tire today but air is escaping from somewhere (still don’t know yet) your vid made is easier to take it off no doubt about that thank you👍🏻I’ll start working on it tomorrow morning✨
A MILLION THANKS 🔥 quick n efficient
I owe you big time!!!
😂👍🏻
That’s the only thing about the Honda 125 innovas & waves ,you have to take the sprocket off as well .That system on the old Cubs saved a lot of hassle you only had to loosen the brake rod pull the split pin out the axle crown nut undo & pull out the axle drop wheel out .PS oh & loosen the brake torque rod as well .
Thankyou, I didn’t know that and you have saved me time as of course stuff ups
Perfect timing. Will try later
Put something underneath the centre stand, to raise the back end. This will allow the back wheel to manoeuvre out much more easily.
@@TheMonty1994 This is a good tip. I struggled to get the wheel back on.
Good....!!!!!
🎉 legend
How high off the floor. On table or jacked up ??
Just on main stand.
Did you put on a table??
Yes, it’s on a bike lift, but you can do the same on the floor on the stand.
Only problem with that is if you are on the side of the road alone with a flat, the rear wheel will not clear the fender.Then what?
😂 You can lift the back of the bike with one finger !
@@TheMonty1994 I wish. I posted this question in another vlog: one guy said poke a stick, a belt , etc thru the spokes of the rear wheel, step on either side of the belt or stick,while bike on center stand, then lift the rear.
Blimey, who needs a single sided swinging arm ?