Honda C70 / C90 BUILD [EPISODE 6]
Vložit
- čas přidán 9. 10. 2018
- Episode 6 of the Honda StreetCub build series is a fun filled episode of front end widening, handle bar mounting, and a lot of roadblocks along the way. This episode was a 3 month long search for parts, basically:-)
- Zábava
Great series, can't wait for Episode 7!
Been following this from the start, great to see it coming on, all the best from Scotland
Niiiice! It’s so interesting to see different parts of the world watch my episodes. Primary Asia is who watches this series
love this build series - i have 3 cubs all in different stages of completion, so lots of inspiration here!
They are so fun to build. It’s a challenge all the way across the board, parts especially. It seems like there should be more available being this is the most produced Motorcyle in the world, with over a million units made :-)
The forks and bar mounting are looking awesome!!
Gotta say I’m super thankful for this build series! I have an 81 c70 passport that I’m looking to do the exact same things to, custom bars and new bigger engine, rear fender cut, new paint job. Excited to see how yours turns out! I’m hoping to have the right gearing and enough power to cruise at 50 to 55. Gotta find an engine I can trust for that.
Sweeeet dude! Thanks for the support 🙏 . I love the Honda cub!!
Hell yeah! The street cub is looking awesome 🤙🏼
Thanks dude! 🙏
awesome build can't wait for the next vid !
Love Honda street cub from Indonesia
Greetings from Greece man , great work
Thanx for new episode man. Really nice bike you are puting together there
Thanks for the positive vibes 🙏
Smooth as butter👌 i love your video bro keep it up 👌
Am from India... i just loved ur work... all the Best Bruh... hv fun...💐💐
Australia loves this build!
And we love Australia. From Fremantle to the Hunter Valley NSW, everything is the best in the southern hemisphere, maybe the world. I was a guest while in the united states navy Australia four times. Good times. Lots of good posty bike builds down under. 🇦🇺
Oke,nyentrik Jack. Sangat detail ngasih keterangan bongpas, (bongkar pasang) bro.
Damn fine work and funny as always
Looks awesome. My build is at about the same stage. Been obsessing how to do the handlebar thing so this video is perfect timing. Just need to order the new bars. I’m going to mod the bars cutting and by welding smaller bars in the ends to use the stock controls. Like you I’m going make own bracket for bars. Thanks for the inspiration! Great vids.
Niiiice!! It’s super cheap to build your own bar mount, just takes fooorever! All of the StreetCub peeps are coming out of the woodwork. I love it!!!
Me too...stuck at handle bar.
Now got the ideas how to diy.thanks.
lol, it was an awesome idea to add some fun bits between all the bike stuff. it’s like a little home movie. :)
Great work bro..
Philippines also watching you!
All your builds are amazing...i got alot of help from your videos...i wanna buold costom scooters for a shop...maybe ill get lucky one day...
Looking good brother. Keep it up my cub feels like its taking forever as well
It’s just as much work looking for parts as it is building :-)
Good job friend...
I inprogress to build Honda GBO C70 to become a street cup.
This video give me a lots of ideas and also learning.
Thanks bro..
Nice! Thanks for watching and the support🙏
Good motorcycle . The honda super cub is very good and fast with modifications .
love from greece!!
very nice work 👍
Greece also see you . Good job !!!!!
Thank you 🙏
watches*
We say in greek that bike, strogilofanaro (that means "round headlight" in one world
Are you utilizing an aftermarket harness or reusing the old one?
Pilipinas ma'h men!😎 Nice one!
mooooore cub updates MattMan!
I know!!! Sheeeesh
I'm looking to get better rear shocks for my cub, Would you recommend that black and gold set that you are using? Does that more modern set actually give a much better ride?
Hi. Im planning to widen my fork also. Do you think its safe? I just really love the classic look if the fork. Pls reply
Hello what type of engine you using? To pair it with the fuel injector system
has anyone done the big bore kit on a super 8 if so how much oil do you add to the gas?
Good morning is to know what type of scissors was used in the honda c90 super cup
Hey, hope to see the final produkt of your projekt. Sweet this Street Cups. Really. I geuss they just little and sweet, but finaly you have to modify 99% of a bike to get it done. Because it is a hole motobike. Even if it's very little. IThe experiance you obtain, is like building a hole Motosikle. Not everybody thing. As hobby in free time, it"s worth, man. The experiance you obtain, it's Worth.
A modification in this degrees is most difficult. A rebuild is much 'n more easyer, cause you have all the sizes from manufaturer. A new build is even easyer, cause you can set the sizes on your own, which have to fit on your plan for the project. By modifing you have to change all which does not fit to your mod. Can cost more than you thought befor.
Wish you all best and nice regards from Istanbul. Thanks (Teşekkürler) for the vids.
This is true! Definitely easier to start from scratch. I build Ruckus scooters from scratch because you trash most of the parts in the build. Same goes with this build. It’s been sooo fun! Very drawn out project though. Thanks for watching and your support 🙏
@@RollingWrench Main sence is enjoing a hobby and having fun, sir engineering. Have a nice day. :)
*Yesssss!* I wonder if you can fiberglass the bottom part of the broken original handle
Maybe, I’m afraid it wouldn’t look clean enough
Apa Khabar Streetcub Lover.. Greeting from Malaysia ..
Indonesian love street cub much😋😋
greetings without fenders from Indonesia
Hello from Cambodia! 'Sues-Day" (Hello in Khmer) Loving the build bro! Keep up the good content!
Thank you 🙏 I want to visit Cambodia soooo bad!
@@RollingWrench Perhaps a shameless plug on my photography tour company. www.SiemReapPhotoTours.com Please come and visit. I would be stoked to show you around the country on... perhaps some "underbone" bikes the Cambodians have never seen. This calls for a build! Hit me up brother. @SRphototours
Elliot leuthold very cool! I will share this with my wife! Maybe we will someday meet??
Looking good man, you should have asked your subscribers about the bottom plastic part!
We have tons of them in Europe.
Good idea! Dang it!
Need your help here, how did you mount the spacer at the brake..did you do machining/ welding? at 2:42 ..thanks in advance..
I watched you build your bike, It's so excited and awesome. I like your rear wheel, It's so big and look to cool.
Thank you for Thai speak, It's good sound.
Thailand. ขอบคุณครับ
I would give anything to live in your beautiful country 🙏
@@RollingWrench when I finish watched your video, I have inspiration to rebuild my bike.
I think keep going to do it.
Ratchapol Ch. do it! You have access to all the parts in Thailand. That was most of the efforts in this build:-)
@@RollingWrench OK, I promises to do it and I will update to let you know.
Rolling Wrench where you buy the rims?? Please
Wahh kereen iam from Indonesia
Hey, I have a little project on my own. Question what sizes are those rims and tire? And where you got it from? Thanks
Keren..joss..😎👍👍👍
Awww. 😢 I wish you could've kept the original headlight. It looked better IMO. Hello from the Philippines, by the way.
I’m going to have to sub to see the results of this cub. : )
Nice work i just had a 1962 Cub given to me that need a complete rebuild, haven't decided yet if im going to street it or trail bike it either way it'll be a restomod build. Keep up the videos i enjoy the builds.
Very cool! Do you have a Instagram? I would love to see it
No not yet soon.
@@RollingWrench @jconesr
@jconesr just acouple pics still figuring out the Instagram
hey man nice project, im gonna start my new c90 restoration process thanks for make this video , id like to make a channel to share my experience too
finally!!!!
Algún consejo para iniciar el proyecto, le agradezco su comentario
Awesome should really consider a vini racing motor swap from Dominican Republic engines range from 70cc up to 190cc full bolt on but the most popular is the 160cc search it up
I was looking at the Daytona motor, or importing a Honda wave motor bores to the max!! :-)
oh yes,
SUPER cool
Thank you 🙏
Makasih banyak 😀😍
You are welcome!
I know this isnt a gy6 video, but ive looked all over for a Naraku DC Adjustable cdi for my gy6 150cc i was wondering if you had one on your site of if you could point me in the right direction. Big Ups and Great Videos
When RTX come in i take a picture show you look like your built! I be up grading put in triple gauge & wire harness because scooter have no gas gauge & rewire under seat add a fuel sending unit sensor! Long time ago my teacher told me i have gift working on cars & motor bike just looking at it!
Show me by tagging me one Instagram.
I await your answer, thank you and where can I get it?
Makasih banyak🤩🤩🤩
great chanel !!!!
Thank you for the positive vibes! CZcams can be a very negative place. It’s nice to read this type of comment!
My from Bangladesh you are awake look awesome
nice streetcub , btw i have streetcub too.
i'm from streetcub indonesia
at 22:12 Engineer + Dancer = Matt awesome!
What is the size of the rear wheel?
From Thailand
What is the size of the rims and tires?
Hay good vídeo, me podrías dar las medidas de la platina que va en el tren delantero de la moto.
Desde Colombia sigo sus episodios, quiero personalizar una Honda C90,
Makasih banyak
จากไทยแลน สุดครับ
จากไทยเหมือนกัน
This has been a great series. I'm really enjoying it. One thing tho... I can't believe you're betting your life on that flimsy little 1/8" sheet metal disc for mounting the handlebars. An then spacers on top of that. Super sketch dude. As I said, it's been a great series so far, I'm just worried about your safety Brutha.
I think you think it’s thinner that it is. It’s thicker than the stock piece. Thanks for watching.
Im thinking to restore old cub.but watching ur videos i think i would try to costumize it
I like it bro but sorry i have question how size your tire?? I sorry i from indonesia my speech is bad. U cn answer bro
al fin
Whats the size of those tires? Nice bike bro
Hey just bought my first cub and I feel like 100 years old, just randomly found out how amazing these bikes are and I’m 37, yes I’ve bin living under a rock, what I’m curious is, what’s the tire size of your tires, I’m curious, I have the real skinny skinny, ones, when you got some time, a guy starting a cub journey in Ontario Canada
Nice bike...where can I get that swingarm from?
nice... gue juga mo bikin street cup ..joss
You should look at Indonesia Streetcub for your reference, because in Indonesia there are many types, variations and solutions to problems in your video can be solved by Indonesian modificator. I like modifying you, but there is something that needs to be improved, hopefully it will be better.
Can you put the links of the swing arm and shocks in the description and the wheels and tires.
The build list is on my Patreon Page
Do I have to pay to see it?
Hey im watching u from belize.. Where did u get that rear swingarm
I got it in Thailand. The brand is Racing boy. You can order it
Great work keep up! I think you fitted the one bar clamp tge wrong side, that's why the lettering is upside down.
Thanks you! Ya it does appear that way. It wasn’t though
🇮🇩🙏 terimakasih
สุดยอด👍
wheres the episode 7 ,I can't wait to see it sir. I wish you great a good job that bike.
I'm from Philippines waiting for next episode
Ahhh. Episode 7 is slowly in the works :-). Thanks for supporting my channel!
👍
im realy excited for this job. im from Philippines
salamat in philippines 😁
Greetings everyone in Indonesia👍 scoot scoot
I will visit your beautiful country someday soon :-). Thank you for the support
Dari mana lek?
Saya semarang
just asking when are you going to finish the streetcub
I have been filming for the next episode. If I had to guess, this summer it will be done. Thanks for the support 🙏
@@RollingWrench thank you very much for letting me now
Im still waiting for next episode. Please upload it I'm currently building mine. Thank you
Damn you need a vice, you make me nervous when you drill holding parts or step on them. I got 30 stitches in my hand doing that.
sama sama jang
Salvadoriam too
top
makasih banyak of indonesia
I am from Colombia
ru going to sell the handlebar plate and risers or atleast the plate
The Mazda rotary in me wants to call it a street port