Thank you for these helpful videos! I just installed the LaserGRBL and I'm patiently waiting for my engraver machine to arrive :D I love your laugh btw
On light burn you can adjust brightness and contrast, I accidently discovered this... click on the picture, then right click. A window will pop up and near the bottom it will say "adjust picture." Click on that and rhe adjustments can be made there
good video. I don't version you were using for this demo (probably 09.20 or 24). I believe in 1.0 the adjustment feature was added. Pick the photo and RIGHT MOUSE and pick "ADJUST IMAGE"
Nice video! I’m new to engraving and still learning my machine…Can you tell me how to keep the transversal lines from engraving?? I have read some suggestions but they are just too detailed for a beginner like me! I have the Ortur Laser Master 2 using both Lightburn and Lasergrbl.
@@brakthehun that’s correct! Between the moves in the white space, if I’m engraving words, there are lines. In addition , around an object, there is often a shaded border.
@@brakthehun yes, after about 30-45 seconds which I believe is the default settings. Weird part, I don’t recall this happening initially. I’ve only had my laser for about 3 months and I am still very much a beginner still learning.
Hey Tony I am really enjoying your videos, but I am having issues when I go to engrave anything it comes out in reverse, I have tried to read on how to fix it and it is just all too confusing, do you have a video that shows how to change settings on LaserGRBL to where it won't do that?, I can normally figure things out pretty well but this program has me so confused. Thanks for any help.
I've converted an old unused 3D printer to a small laser engraver using a diode laser, but i'm having issues getting LaserGRBL to recognize it. I can connect and burn with it using Lightburn, but LaserGRBL times out every time, it detects it's connected to COM3 so I know it can at least detect it's presence. The printer runs a variant of Marlin so i've set that in LaserGRBL but have had no luck at all.
I'm not sure you can compare them: Laser GRBL is just to convert a picture or anything else and engrave with a laser. You cannot draw with this software. From what I know LightBurn is not free...
I’m very new to engraving. I literally know nothing. I just want to engrave words on bamboo candle tops. Is there something for that! I currently have lightburn. I don’t know what to do. Will I be able to even do this?
@@brakthehun thank you. I’m trying to engrave but it’s not doing anything. Nothing is showing up on my candle tops. Is there a dummies for lightburn 🤦🏾♀️
I don't quite understand all the functions for lightburn and I don't know how to open gcode files to burn. So I stick with lasergrbl and use easel for all the settings. Lasergrbl can see my gcodes that I generated.
Thank you for these helpful videos! I just installed the LaserGRBL and I'm patiently waiting for my engraver machine to arrive :D I love your laugh btw
Thank you thank you. I just got a laser. And your vids are straight forward. THANKS for the comparison.
Great video thanks I will use both. I like light-burn as a works space.
Excellent comparison, I mean once you mentioned lightburn is $40 I was decided 😅 thanks
GREAT JOB ON THE VIDEO
You have a way to adjust the brightness, contrast ... right click on image, adjust image . And you have more options
So......I still need both
Great video, a lot of effort has gone into making it. Thanks
On light burn you can adjust brightness and contrast, I accidently discovered this... click on the picture, then right click. A window will pop up and near the bottom it will say "adjust picture." Click on that and rhe adjustments can be made there
Great video but it’s so confusing lol hopefully when I get my laser and start practicing things will make sense more.
It’s now $60
Thanks for the information, it helps me a lot.
good video. I don't version you were using for this demo (probably 09.20 or 24). I believe in 1.0 the adjustment feature was added. Pick the photo and RIGHT MOUSE and pick "ADJUST IMAGE"
Another thing to add is that Lightburn only allows you to license 2 computers
Hello - How to reset GRBL configurations (My setup for my Sculpfun S9 is wrong)
Why not use Shape Properties for images? Gamma, Brightness, Contrast, Enhance and others are there
I was not aware. That is useful. Thank you.
You must have and use both for the different abilities?
Nice video! I’m new to engraving and still learning my machine…Can you tell me how to keep the transversal lines from engraving?? I have read some suggestions but they are just too detailed for a beginner like me! I have the Ortur Laser Master 2 using both Lightburn and Lasergrbl.
Your laser isn't turning off correctly during moves??
@@brakthehun that’s correct! Between the moves in the white space, if I’m engraving words, there are lines. In addition , around an object, there is often a shaded border.
Sounds like your laser trigger signal isn't working correctly. Does the laser ever turn off??
@@brakthehun yes, after about 30-45 seconds which I believe is the default settings. Weird part, I don’t recall this happening initially. I’ve only had my laser for about 3 months and I am still very much a beginner still learning.
Hey Tony I am really enjoying your videos, but I am having issues when I go to engrave anything it comes out in reverse, I have tried to read on how to fix it and it is just all too confusing, do you have a video that shows how to change settings on LaserGRBL to where it won't do that?, I can normally figure things out pretty well but this program has me so confused. Thanks for any help.
In your console,, try typing in:
$3=1
And see if that fixes it.
@@brakthehun Thank you I will try that
@@sherribarrett75 well? inquiring minds want to know?
Very Nice Video Bro
I've converted an old unused 3D printer to a small laser engraver using a diode laser, but i'm having issues getting LaserGRBL to recognize it.
I can connect and burn with it using Lightburn, but LaserGRBL times out every time, it detects it's connected to COM3 so I know it can at least detect it's presence. The printer runs a variant of Marlin so i've set that in LaserGRBL but have had no luck at all.
Gotta run GRBL firmware
Hello, thanks for the video. Is it possible to make grids to test diferent materials on LaserGRBL?
I believe there are files.
I just try things but that's OK.
@@brakthehun thank you, anyways
His m8 is dithering for a laser modual with just two wires + and - and pwm for ones with 3 wires
Great video! Can I upload a svg file with lightburn and/GRBL to laser cut with Atomstack?
yup!!
cant i use it on arduino, or deferent motherboard.. diode module laser or co2....thx
There are many boards you can run GRBL on.
You can use any of these boards to control a diode or a CO2 with almost all GRBL boards.
I have a probler with laser grbl don’t making straight lines straights, someone with same issues?
X axis?? Y axis??
I think you messed some people up when you started going to Light burn and talking about Lasergrbl functions.
How much difference is there in the software from 2021 to the 2023 version?
Not too much. They added some infill options for tracing and some presets for popular brands.
I'm not sure you can compare them:
Laser GRBL is just to convert a picture or anything else and engrave with a laser. You cannot draw with this software.
From what I know LightBurn is not free...
Agreed. They can both stream to grbl controllers. They are both for lasers,, but they are very much used for different things.
I’m very new to engraving. I literally know nothing. I just want to engrave words on bamboo candle tops. Is there something for that! I currently have lightburn. I don’t know what to do. Will I be able to even do this?
Lightburn is great for this.
@@brakthehun thank you. I’m trying to engrave but it’s not doing anything. Nothing is showing up on my candle tops. Is there a dummies for lightburn 🤦🏾♀️
@@andrealigesaddler8397 what color is the top?? If it's white,, then a blur diode will not engrave it.
@@brakthehun it’s wood , tan
@@andrealigesaddler8397 gotta get a good focus and go slower then.
Anyone else having issues with LaserGRBL not moving the Z-axis at all?
Most Laser control boards do not come with a Z-axis. What board are you using??
@@brakthehun Idk about the board, but it's got a z-axis. I'm using a CNC 3018
@@FingerBob You have to go to menu 'Grbl -> Settings -> Jog control' and activate the "show Z up/down " option.
@@alnath01 I'll try that. Thanks man!
right click, adjust image. lightburn
Do these softwares also work on windows 11?
I believe so.
I don't quite understand all the functions for lightburn and I don't know how to open gcode files to burn. So I stick with lasergrbl and use easel for all the settings. Lasergrbl can see my gcodes that I generated.