Hi Anthony You definitely have the IT factor or X factor You’re a Genius of Knowledge and a Master of Educational Design. Which means of course Your combination of Talents places You Sir as Simply the Best! Please keep Teaching Forever! Thank You
i'M NOT EXAGGERATING, tHIS VIDEO WAS MORE HELP THAN ALL OTHER VIDEO SIVE WATCHED IN THE PAST WEEK COMBINED... NOT ONLY DID YOU ACTUALLY SOLVE MY PROBLEM, BUT YOU EXPLAINED WHY YOUR SOLUTION IS THE SOLUTION..!!!!!!!! oops, caps lock..
Great training videos' - 2 Question - what is the life of a Aufero Laser Module ? how long do they last. and secondly, what is a good price / source to buy these modules? Thank you for your help.
Hello Thanks for the great explanation on laser GRBL. I have a 0.5W laser with a TTL control board. I connected the TTL pins to the Spindle enable on the CNC shield V3.0 and ground. This keeps the laser ON all the times when the machine is powered ON. Is this connection correct? How to fix this?
Your video has been very helpful! Now, if I can bother you one more time: I have the 3018Pro with 5.5w laser. I’ve pretty much figured out power settings, etc. My question is this; how do align the laser for my project? For example, I have a sign that is approximately 150mm X 70mm, with the 70mm being the width (X Axis). I want to engrave from top to bottom on the Y axis. I’m using Laser GRBL software.
Hello my friend Thank you for your explanation, that is an effort to help Please help me in adjusting the axes of the LED laser machine. I made it manually, but the sizes of the hubs on it are different from the type of stepper motor. I need help in adjusting the axes in the distance with the movement I mean, every millimeter is how many steps, and thank you
Thanks for your videos! Super helpful. I watch them whilest waiting for my second Arduino/Shield combo (killed the first one by beeing stupid I guess). First question: I use a Neje 40W and it came with a handy interface/module that shows power sent to the diode in %, but even 0.5% still burns wood right away. The module can tune the power all the way down to 0.01% in MANUAL mode, but will start at 1% (or probably around 0.5%) when in TTL-input mode (1 of 255 max). So, could an S-command be lower than 1 (0.01?)? Or should I try to change the max settings from 255 to 1000? Second question: When you update parameters via the command line after reading them ($$), are the new parameters saved to the controller or will it loose these updates after a reset? Cheers from Switzerland
Those parameters are saved to the controller. They will stay even when powered down or even when another computer connects to it. You can change your $30 to a larger range like 1000 and the give it an S1 command making 1/1000th power instead of 1/255th power.
My questions pretty much been answered now that I binge watched all your other vids on that subject. Great tutorial..! D'you accept donations via paypal or so?
Hi Anthony, just trying to get set up, when I connect I don't get the comport and Baud, it comes up emulator, how can I fix this please - newbie - have a sculpfun s6 pro
Sir i have neja laser 20 w how can leser speed up in configuration grbl Coz the leser high and wood can not be engraving its cut the wood or bamboo and engraving very deep
Can you direct me to the video you show us how to program the home button? When I push it, it goes to bottom left corner but doesn't stop. Makes this awful sound and I shut it off real fast lol
I'm confused with this entire video because if you want to reset your lasers home position, you just move it to where you want by using the arrows on the left of the screen, then set your zero position with the "Set Zero Point (G92)" button - the one with the globe and the location tack on it. No?
good day ,im having trouble when i load a picture i can not see it all i see is wide spaced lines and not the loaded image ,i thing i messed up as setting nut not sure where please advice
Hello There is someone who knows why a CNC machine I built does not cut or burn circles or squares and drawings symmetrically. Oval and rectangular: I use Arduino Shield and ugsplatform Thanks
Hi Anthony You definitely have the IT factor or X factor You’re a Genius of Knowledge and a Master of Educational Design. Which means of course Your combination of Talents places You Sir as Simply the Best! Please keep Teaching Forever! Thank You
Thank you so much for helping a layman use grbl,brilliant easy to follow videos,keep up the great work
i'M NOT EXAGGERATING, tHIS VIDEO WAS MORE HELP THAN ALL OTHER VIDEO SIVE WATCHED IN THE PAST WEEK COMBINED... NOT ONLY DID YOU ACTUALLY SOLVE MY PROBLEM, BUT YOU EXPLAINED WHY YOUR SOLUTION IS THE SOLUTION..!!!!!!!! oops, caps lock..
Thanks for your perfect explanation
the explanation was very good and understandable thank you.
Nice and clear, Thank you!
Thanks for a very helpful video
complimenti sei un grandissimo nelle spiegazioni grazie per i tuoi video
really helpful video
Great training videos' - 2 Question - what is the life of a Aufero Laser Module ? how long do they last. and secondly, what is a good price / source to buy these modules? Thank you for your help.
Hello
Thanks for the great explanation on laser GRBL. I have a 0.5W laser with a TTL control board. I connected the TTL pins to the Spindle enable on the CNC shield V3.0 and ground. This keeps the laser ON all the times when the machine is powered ON. Is this connection correct? How to fix this?
Connect the ttl to the white pin next to the Z+ pin 8f you're using the GRBL shield and using GRBL1.1
I will eventually have a video explaining why.
Your video has been very helpful!
Now, if I can bother you one more time:
I have the 3018Pro with 5.5w laser. I’ve pretty much figured out power settings, etc. My question is this; how do align the laser for my project? For example, I have a sign that is approximately 150mm X 70mm, with the 70mm being the width (X Axis). I want to engrave from top to bottom on the Y axis.
I’m using Laser GRBL software.
Use the perimeter button to line it up. You may also try making a jig for the lower left corner.
Hello my friend
Thank you for your explanation, that is an effort to help
Please help me in adjusting the axes of the LED laser machine. I made it manually, but the sizes of the hubs on it are different from the type of stepper motor. I need help in adjusting the axes in the distance with the movement
I mean, every millimeter is how many steps, and thank you
Thanks for your videos! Super helpful. I watch them whilest waiting for my second Arduino/Shield combo (killed the first one by beeing stupid I guess).
First question: I use a Neje 40W and it came with a handy interface/module that shows power sent to the diode in %, but even 0.5% still burns wood right away. The module can tune the power all the way down to 0.01% in MANUAL mode, but will start at 1% (or probably around 0.5%) when in TTL-input mode (1 of 255 max).
So, could an S-command be lower than 1 (0.01?)? Or should I try to change the max settings from 255 to 1000?
Second question: When you update parameters via the command line after reading them ($$), are the new parameters saved to the controller or will it loose these updates after a reset?
Cheers from Switzerland
You may need to increase your $30 to 1024 or so.
The S command has to have full numbers
Those parameters are saved to the controller. They will stay even when powered down or even when another computer connects to it.
You can change your $30 to a larger range like 1000 and the give it an S1 command making 1/1000th power instead of 1/255th power.
Parabéns. Sucesso
My questions pretty much been answered now that I binge watched all your other vids on that subject.
Great tutorial..! D'you accept donations via paypal or so?
Sure - brak_the_hun@yahoo.com.
Can you do a circle perimeter setting? TFS
Hi Anthony, just trying to get set up, when I connect I don't get the comport and Baud, it comes up emulator, how can I fix this please - newbie - have a sculpfun s6 pro
Your videos are very indepth. Lightburn gives settings for a rotary attachment are there any for laserGRBL?
Not really. You can enable Z-axis
Sir i have neja laser 20 w how can leser speed up in configuration grbl
Coz the leser high and wood can not be engraving its cut the wood or bamboo and engraving very deep
$110 and $111 are the max speeds. I think the NEJE can be set to:
$110=12000
$111=8000
If those don't work right,, then decrease the numbers.
Can you direct me to the video you show us how to program the home button? When I push it, it goes to bottom left corner but doesn't stop. Makes this awful sound and I shut it off real fast lol
I Love You Anthony
Like like like!
I'm confused with this entire video because if you want to reset your lasers home position, you just move it to where you want by using the arrows on the left of the screen, then set your zero position with the "Set Zero Point (G92)" button - the one with the globe and the location tack on it. No?
good day ,im having trouble when i load a picture i can not see it all i see is wide spaced lines and not the loaded image ,i thing i messed up as setting nut not sure where please advice
Sounds like you may need to increase your lines per mm.
Help! My Ortur goes through the motions but doesn’t actually engrave anything.. what am I doing wrong??
Does your laser ever fire??
Which laser head do you have??
Hello There is someone who knows why a CNC machine I built does not cut or burn circles or squares and drawings symmetrically.
Oval and rectangular: I use Arduino Shield and ugsplatform
Thanks
That is typically from your $$ settings not being set up correctly
czcams.com/video/HFLrW0xRkcs/video.html
czcams.com/video/Y-Kk2n-Chuk/video.html
hi done all that but when it go round good laser is not on like yours mate
Try S20?? Maybe S30??
Do you have a print out of the codes ?
I think now,, the latest version has a default set of buttons similar to the ones I added.
My x axis travels on the worpn direction what can i do?
Try typing $3=1 in to your console then restarting the machine.
i dont know what happed but i lost all my prior comments and our discussion i am still interested in doing a zoom
Were you looking to do another Zoom meeting??
@@brakthehun would love to if you have the time
what a pain!! just get lightburn!!!
I like lightnuern for very simple images and doing cuts. I'll have a lightburn vs laserGRBL soon.
@@brakthehun nice :)