I needed the following parts for the latest (as of Dec 2017) model; A 1/2 inch or metric L key to remove the plug. Best to carry the heater to get the exact fit. If you want to connect to a yellow gas line: 1 male to male 3/8 to 1/2 inch coupler (the heater is 3/8), 1 elbow and 1 gas nipple. Again, best to take the yellow line to HW store if you can.
Thanks for this video, I just bought this exact heater, and yet to install it, seeing it done and the way you hooked up off the water heater gave me a better understanding overall of the whole process and an some ideas of if I should put my supply gas tee in the same spot as you did or right where the main gas supply line comes in?(from this spot it gives me a better angle down low to around the base of the heater) because I'm hoping of routing the flex yellow hose down around the base of the water heater (water heater is mounted on wood pedestal) and up on the wall leading to the wall heater, just for aesthetic purposes.
The Tee shouldn't matter if its at the water heater. I have a shutoff valve at the water heater for the off season and if i want to disconnect the heater.
Thank you for posting this video. I am looking to use this same heater with propane- do you ever get any gas fumes with this unit? Do you know of anyone using this with propane, and have they ever had fumes? Is a sediment trap necessary if using propane?
Only thing I would recommend is your t come off at the wall and not the water heater in case of a leak. You should be able to shut the units off independently. Just a safety issue which could maybe never cause an issue...until it does. Great video though and we are looking into this unit.
Just install one 30 k btu's running on natural gas on my 25x25 insulated and drywalled garage here in Chicago don't work is only hot couple feet around the heater 😣
Armando Ivan Zamora Bravo I live in Chi too and mine works great. I do have an electric blower motor inside of it the helps a bit, I also keep a ceiling fan going for better circulation. Been working great for over 12 years now. Picked up at Menards.
Nothing at all was mentioned in the video about the dangers of carbon monoxide poisoning, losing oxygen in the air and having proper ventilation....why is that?
From the heater, it requires a 3/8" nipple. I sued 3/8" for my sediment trap, all the way to my flex-line connection. I came off the T at the sediment trap with a 3/8" nipple to 3/8" flare.
Craig Collins , hi Craig good video, hey I was wondering a few things. Are the size of the pipe adaptors needed indicated in the manual? and did you follow those sizes? Do you know if there is dual pipe adaptor or valve, I was thinking about creating this right where the main gas line comes in after the shut off control valve, what do you think about this?
I have a shutoff valve at the heater also. As far as pipe size I matched the size going to my water heart. The manual doesn't say but does recommend a pressure test because high of pressure will damage the heater. Test Pressure Equal To or Less Than ½ psig (3.5 kPa)
Yes it can, but there are different state laws against it. California is one, but this unit i have is ok the the garage. I could not order the white version.
Good job...as a retired Union Pipefitter I was glad you are one of few installing a debris trap for the intake gas.
Well done Craig. Only thing ruining it was not having a Packer game on.😉😎
Good video Craig. 👍👍👍
Thank you!!
nice man cave !! think I might get one for my work shop thanks for the video
Thomas workshop Thanks
I needed the following parts for the latest (as of Dec 2017) model; A 1/2 inch or metric L key to remove the plug. Best to carry the heater to get the exact fit. If you want to connect to a yellow gas line: 1 male to male 3/8 to 1/2 inch coupler (the heater is 3/8), 1 elbow and 1 gas nipple. Again, best to take the yellow line to HW store if you can.
Thanks for this video, I just bought this exact heater, and yet to install it, seeing it done and the way you hooked up off the water heater gave me a better understanding overall of the whole process and an some ideas of if I should put my supply gas tee in the same spot as you did or right where the main gas supply line comes in?(from this spot it gives me a better angle down low to around the base of the heater) because I'm hoping of routing the flex yellow hose down around the base of the water heater (water heater is mounted on wood pedestal) and up on the wall leading to the wall heater, just for aesthetic purposes.
The Tee shouldn't matter if its at the water heater. I have a shutoff valve at the water heater for the off season and if i want to disconnect the heater.
great video thx
yea gets nice and warm them shuts off
Thank you for posting this video. I am looking to use this same heater with propane- do you ever get any gas fumes with this unit? Do you know of anyone using this with propane, and have they ever had fumes? Is a sediment trap necessary if using propane?
Good job- Damn what a T.V.!!!
Projector. YOu can find HD projectors used for
Nice video nice projector to
Thanks for the help! Most importantly I may need help with your projector and screen set up!!!
Very Good!!!
Only thing I would recommend is your t come off at the wall and not the water heater in case of a leak. You should be able to shut the units off independently. Just a safety issue which could maybe never cause an issue...until it does. Great video though and we are looking into this unit.
Nice job...I just ordered 1..is it safe to hook up next to the water heater?
great job im trying to heat me man cave also how well does the heater work my cave is 20' x 30'
sonny walker it gets warm very fast in my 3 car garage with an outside temp of 35 degree.
WHODAT! Need 'dem Saint's on that big screen.
Just install one 30 k btu's running on natural gas on my 25x25 insulated and drywalled garage here in Chicago don't work is only hot couple feet around the heater 😣
Armando Ivan Zamora Bravo I live in Chi too and mine works great. I do have an electric blower motor inside of it the helps a bit, I also keep a ceiling fan going for better circulation. Been working great for over 12 years now. Picked up at Menards.
Cool, I think I can do this. Yes, sad day for us Raider fans.
Ir30pmdg-1 Propane heats 1000 square feet 30kir lp manual vent wall heater(Dyna- Glo)
I have the 30,000btu dyna glo. I cannot find the selector on my unit. Nothing to access on the back
Do you mean a selector for propane or natural gas? There is no selector you have use one of the 2 ports. One is natural gas the other is propane.
If I don’t install a trap will the heater still work?
Yes.
I was going to subscribe, but you're a Raider fan. LOL
No need a regulator?
Need to do a t.v. Video next.
Nothing at all was mentioned in the video about the dangers of carbon monoxide poisoning, losing oxygen in the air and having proper ventilation....why is that?
Do you use 1/2 pipe???
derper derp yes I did
From the heater, it requires a 3/8" nipple. I sued 3/8" for my sediment trap, all the way to my flex-line connection. I came off the T at the sediment trap with a 3/8" nipple to 3/8" flare.
Craig Collins , hi Craig good video, hey I was wondering a few things. Are the size of the pipe adaptors needed indicated in the manual? and did you follow those sizes? Do you know if there is dual pipe adaptor or valve, I was thinking about creating this right where the main gas line comes in after the shut off control valve, what do you think about this?
I have a shutoff valve at the heater also. As far as pipe size I matched the size going to my water heart. The manual doesn't say but does recommend a pressure test because high of pressure will damage the heater. Test Pressure Equal To or Less Than ½ psig (3.5 kPa)
Craig Collins how do you pressure test it? What tool do you need to do this? Did you pressure test yours?
Nice tv can this heater go in my basement..
Yes it can, but there are different state laws against it. California is one, but this unit i have is ok the the garage. I could not order the white version.
Nice video Thanks
did you install a regulator? ? ? ? ? ?
for natural gas regulators are typically installed at the meter
Good video..... Very Poor Audio...
DICKSON OZOBIA yeah that was from the camera. I need an of camera Mike for sure.