A Place For All Of Our Junk!
Vložit
- čas přidán 4. 08. 2023
- My yard is overrun with my family's stuff! Sports equipment, yard tools, and outside toys need a home. We built an outdoor shed for less than those flimsy plastic ones from the store. We've got digital plans available right here 👉 ilt.ms/p/outdoor-storage-shed...
🛠 Join The Maker Alliance to directly support the channel and access exclusive videos, discounts, and our private Discord community!
themakeralliance.com
Subscribe: bit.ly/ILikeToMakestuffSubscribe
Second Channel: bit.ly/iltms-2
Check out my Top Videos!: bit.ly/ILikeToMakeStuffTopVideos
Get digital plans, cool merch, and in depth articles at
iliketomakestuff.com
Learn 3d modeling in Fusion 360 with our online course:
www.fusion360formakers.com
TOOLS & SUPPLIES WE USE (affiliate links):
kit.co/iliketomakestuff/equip...
kit.co/iliketomakestuff/my-wo...
kit.co/iliketomakestuff/shop-...
FOLLOW:
/ iliketomakestuff
/ iliketomakestuf
/ iltms
MUSIC: share.epidemicsound.com/iltms
#ILikeToMakeStuff #outdoors #woodworking
About I Like To Make Stuff:
We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!
These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!
Stop Wasting Money on Cheap Plastic Sheds!
• A Place For All Of Our...
I Like To Make Stuff
/ iliketomakestuff - Jak na to + styl
Get the build plans to build your own shed here! 👉 ilt.ms/p/outdoor-storage-shed-digital-plans/
Bill, where's Ted?
I Saw the video title and genuinely thought you were talking about american style houses i though for once an american has caught on to the timber frame houses clad in materials that rot over time being a terrible investment
the intense realism of "Oops I made a little mistake" snowballing in to "I have to rework the whole project" is honestly reassuring
I'll make the mistakes so you don't have to!
@@Iliketomakestuff Okay Joe Dirt.
@Iliketomakestuff after reading that my mind jumped to David Spade in Joe Dirt talking about the scrubbing bubbles 😂
@@Iliketomakestuffwe don't have to make those specific mistakes but we'll all make plenty of others!
That feeling of looking at parts you've just cut thinking "I know something is wrong here somewhere" is very relatable
I really love how you handle issues and mistakes. You don't lose your temper or make a massive deal out of it. I know sometimes projects get put on hold because big setbacks are discouraging and you might need time to regroup (like the Karmann Ghia), but you always come back to tackle things with a clear head and a measured outlook. I think it's a great lesson on emotional management when it comes to being a maker, and I love that you're the person that's guiding so many people on their maker journeys.
Thanks. It's not easy to keep moving forward sometimes, but we all make mistakes. Get better every time 🫡
Comforting to know that others experience the same problems as me when I’m designing on the fly. Great job and thanks for including the stumbles along the way to the finished project.
Nice!! And it's very comforting to see I'm not the only one making a few mistakes here and there 😅
Ha, we all make mistakes. It happens.
Exactly what I was thinking
My thought exactly!
Exactly! This reminded me or me the whole way through.
I have one of those plastic sheds, but I only spent $100 on it, so when it came to the build vs. buy, it was easier to buy. My next one on the other hand will definitely be built. Virtually any shed you can buy is either made up of cheap materials or overpriced, often both. Your design is simple and easy to put together. Love the mistakes that you made and showing how you adapted and made it work in the end!
More shed builds pls! Love this, it’s a great starter into building bigger projects and it looks much better than any plastic crap at the store
You can pick up metal circular saw blades for cutting significantly easier at hardware stores
I love the brutal honesty of the things that go wrong! Thanks, Bob! Keep making stuff.
I love the door transition!
If you're not limited by tools on this project, buying 2x6s and ripping them into 2x3s gets you a better quality for the same or slightly less money. The quality of the 2x3s at my home improvement store were absolutely horrible so I had to do this to get anything usable.
We were just talking about building one of these for our back yard, so the timing of this is perfect! You've given me some great ideas to keep in mind. Thanks for sharing!
Glad I could help! Check out the plans we made!
Perfect small-scale solution to fit the space and your needs. Nice job, Bob!
Thanks!
The reason why flipping the blade works is that you don't actually want to cut the metal. What you're doing is basically like punching little holes in the metal repeatedly and it's a better shearing action than the bladed side would without leaving much burs or snagging on metal bits.
I get so much more out of these videos when you show where you messed up and then how you addressed it. CHEERS!!!! It’s almost like 2 videos in one!
that shed door transition... *chef's kiss*
Thank you so much for including mistakes. I am a total ROOKIE DIYer so it’s encouraging to see that you include your mistakes and don’t edit them out, because we all learn from our own and others’ mistakes.
lol fricken loved watching this build (love all your work of course but..) made me feel so much better about my mental status while doing projects. The "mess ups" with cutting boards in wrong orientations, problem solving on the fly, haha doing math and then saying "um no thats not write at all". Not sure if you have these thoughts and dialogue with yourself even when the camera isnt around but I felt like this video was an external representation of what conversations I have in my own head while doing most projects.
This is how a lot of my projects go - I forget one little detail and it messes everything up down the line, I get frustrated, and toss it aside for a while until I can calm down enough and fix it all. Thanks for keeping that stuff in. :)
The ball storage is pretty smart.
I am the same way with projects. I never draw anything out or anything, I just jump into stuff and sometimes it gets me into trouble.
Thanks for keeping in the “ dangit I didn’t think it through all the way” moments. I’m relatively new to working with wood things (so very very murch less forgiving than say, fabric - for me anyway) and have felt fairly discouraged by my own not dangit moments. [which I did make a video about 😂😂😂😂] Love this shed. Love your videos. Very inspiring and relateable. 🙏🏻🙏🏻🙏🏻🙏🏻
Watching this gave me an idea on how to improve plans for another (the real tall one) cabinet that I purchased from you. I am in the process of building. I am going to make the doors very sturdy and add narrow shelving on the door deep enough to store spray cans, glue, and small items. This is the second storage cabinet that I have built from your plans. I am using OSB plywood to save money. I like the look of the OSB because it gives the cabinet character.
I've made a couple of small sheds similar for storage (including a short wide one just for rolling in thenlawn mower, portable gen, and power washer). Typically I used 2x4s I've ripped down in half (for ral lighweight sheds) or usually into 2x3s, reusing the cut off 1x2 remainder as the trim - saves a bunch that way (locally a 2x4 is only 60¢ more than a 2x3).
DUDE! your timing could not be better with this video! This is precisely what I need to do!
Thank you so very much for all of your content!
No problem! If you make it let us know how it went! 👊
What I learned from this is make plans first and just as important, follow them.
This is a lesson I keep having to learn the hard way myself.
Living in Scotland and having a plastic well built shed is a must most of my neighbours had their timber/wood sheds replaced at least once in the past 15 years.
You are so genuinely entertaining to watch.
I’m in the middle of my first big project and lots of things are going wrong. I felt kinda bad about myself, but I feel much better now 😁 thanks for the video!
You got this!
I have to say, this came out at the perfect time!
I've been debating between building vs buying a shed and was about to just bite the bullet and get a pre made resin one, but I think I'll go ahead and price out a similar build to what you have here for the footprint I need, and get started at some point next week. Thanks for the great content!
the qr codes thing is so dope. also youre editing and humor is so perfect.
skill saws are actually really good at cutting metal, with the right blade of course, i have also used them on plastic sheets.
Good volume control. Very professional.
Great build and love how you kept the mistakes and how you handled them in the video. One safety tip, cut treated wood either in a well ventilated space/outside or wear a respirator. You don't want to breathe the sawdust from it. Always love your videos and this one is certainly timely. Cheers!
I built a similar one on a budget. The main difference is I clad mine in cement fiberboard siding as I was using it outside.
Definitely prefer the new title. Lol. Totally get why a homeowner would build one out of wood, but I love the plastic one on my apartment patio that came flat packed and could build in 30 min and I'll be able to disassemble and move easily.
Yes, much better title.
Like the video and you even left the mistakes in! Love it! Shows that you are only human and mess-ups do happen Hope to see more!
I've been thinking of making one of these to fit between the legs of a 16ft high deck. I might have to get the plans, though, I need it deep enough for a push mower...
Awesome job, despite the mistakes. This makes the project much more approachable to me.
"And NOW for the bloopers" LOL. Seriously though, love this, love you guys, love the channel! Thank you!
LOVE the new approach!!!
Makes the videos much more relatable for mere mortals
Thanks Bob for the entertaining and informative video. I was looking forward to the end of the video where you'd show how you organize the clutter of tools and toys in a cool way. So I was wondering whether you'd be up for making a video dedicated to innovative and custom storage solutions like the one with the rubberband to keep the balls in place. Thank you so much and have a great day.
Great to see all the mistakes, guys. Makes me feel a lot more human while DIY'ing and makes you guys more relatable! Fun video and cool inspiration
Good build. Much ❤to whoever does the camera editing. Thank you for lols.
Quick tip, when screwing on your sheet metal roofing make sure to drive the screws into the raised part of the sheeting. While the rubber washers do a fairly good job at keeping the water out, they are not perfect and will leak if water pools or runs over them. By only putting screws in the ridges of the steel sheet water will run straight off and will never pool around your screw holes. Have a good one Bob! 😊
This goes against the manufacturer recommended installation instructions for that metal roof
@@ThatToast You know who the manufacturer is? How would the manufacturer have us do it?
@@minchy83 The manufacturer is likely Union Corrugating, their instructions have the screws in the valley
@@ThatToast Their roof will likely leak in 5 years time when the rubber breaks down. We always put the screws in the hills to avoid this.
@@minchy83 You likely void any warranty by not following the manufacturer's directions. plus the rubber definitely lasts more than 5 years
It's always the dingle on the saw that messes me up too. 😂
Love the way you keep basketballs from rolling out! Genius!
Great build - beautifully done!!!
Although the base 2x4 is pressure treated to resist rot, it will behave event better if put on top of some moisture insulation like polyethylene foil or tar paper you would normally use to insulate a house framing from a foundation.
Ground contact lumber would be better. Plastic pallet would be best.
The ball restrainer is awesome idea
Massive props for the transition at 13:30 👏 It was smoother that that criminal in that song that time 🎵
Fantastic project, we all need something like this
Nice to see I'm not the only person who built one out of wood instead of buying a plastic box. One thing about those roofing screws you showed normally those need a hole drilled before you put them in. You can use self tapping that have the rubber gasket on them and not have to predrill them.
Those screws do not need a pilot hole. Just need some pressure behind them.
13:00 "if it can seal a boat..." perfect Xyla Foxlin moment
I love that he’s human and is showing his own mistakes and goofs. ONE OF US!
For people who live in the UK who want to have a go at something like this, a good source of cheap or free plywood is to go around to your local medium sized window fitter companies. A lot of them get their sealed double glazed units made to order, and they get shipped to the factory for framing on large custom sized pallets. The pallets are usually a sheet of ply with some corner blocks and base stringers added. I've managed to scrounge several 8x4' pallets in this style before, and even though the wood does need a bit more prep work before you can use it, the stuff was free.
How I see it, you can put that extra bit of work into your hobby, or you can put that extra work into your boring day job to get money to pay for better materials for the hobby that you'd RATHER be doing.
What was said: "If it can seal a boat, it can seal a shed."
What was heard: "If you can dodge a wrench, you can dodge a ball."
This video came at the most perfect time. My Mom and I need a garden shed for all of our tools, and had considered buying one. After looking at the reviews and prices on a metal one, we decided we could build one ourselves for a lot less. This one is a bit smaller than what we need, as we want to store our tiller and pressure washer, but I think your plans will give us a great starting point to modify.
The plans are super helpful and accessible!
@@Iliketomakestuff I just purchased them, and got the miter saw station plans as well. My Dad's shop needs an upgrade with support on each side of the saw. I saw several shop plans I'll be picking up along the way. Thanks for making them available!
Loved your post! Honest, and a good looking storage cabinet!!! Tc from Nevada
Hey Bob it might be wise to cut or drill some holes into the back of the shed to combat moisture & mold.
You'll let the spiders in!
@@AnEvolvingApe The spiders and hornets will already be able to get in under the roof.
@@HandlebarWorkshops yep
Damnit, another project I need to pause all my others for. Great work man! You made eating breakfast extra special this morning with this video!
This video is a perfect example of a video I would make 😂. Thanks for keeping it real Bob!
Love the vibe of this one!
Nice!!! We would need those profile pieces for the roof here due to the wasps, so if you have lots of wasps PLUG THOSE HOLES!!!
I need to build one of these... thanks!
Welcome to dang it with Bob.
"Hi, i'm Bob and I like to make stuff".
Hi Bob, i'm Adam and I like to watch stuff.
Things are so expensive! Building things yourself is so much better! Its awesome that you were able to model and actually look at it on your phone! That's awesome!
Great video & project, Bob~! Love the included "Oops'es".
I’m not so sure about this conclusion. Cost benefit of paying the extra $100 or so for the store bought product vs. the savings weighed against being in the shop all day. But, thank you for choosing the latter. Definitely a more interesting video than bringing one home from the store and putting it together on camera. Though, I’m sure you could make that entertaining too 😅
Fair enough!
Definitely agree with this. For the average person who doesn't especially enjoy woodworking and won't already have tools, the pre-built ones are a fair price. They're way lighter and easier to disassemble/rebuild, too, so if you're not a homeowner and will be moving, that's another reason to just buy the pre-built. This wood one is prettier, to be fair, I think most would agree, but the other ones are also perfectly fine if you aren't eagerly looking for your next project.
You may want to get the inserts for the roof. I built something like this last summer and wasps love crawling in and making it their new home. I’m always ready to run when I go to open it if it’s been awhile. 😅
Thanks for showing how you built the prototype for the plans 😆
If there’s enough left over offcut material from the screens, I would cover inside the air vents at the top to keep out any bees/wasps or other small vermin. Speed bumps are all part of the journey!
Thanks for the idea!
Great project 👍
Great build I need to make a similar one for my house. One point I would make is maybe close off the ends of the corrugation. Opening the shed for a ball when there is a wasp nest inside isn't fun. I'm speaking from experience!
with those gaps in the roof Bob is going to have a real nice beehive in a few months
Fantastic work, Bob! It turned out amazing! 😃
Stay safe there with your family! 🖖😊
Thanks!
This is the perfect visual representation of “do as I say, not as I do.” 😂
When I put the metal roof on my woodshed, I bought a special ferrous metals blade for my circular saw. It worked great.
black and clear coat is a nice looking combo!
A note or two on metal roofing. It can cause condensation on the inside, so some manufacturers add a drip stop (it looks like a little fleece covering) to mitigate this. However, roof sheets with a drip stop should not use the filler pieces as air flow is needed to allow the condensation to evaporate.
Tried the QR-code thingy and god damn is technology cool :D
love the vids
That looks super pretty with the black and wood tone contrast
Yeah I love it
Nice build. TIP screws go into ridge not valley on roof. Less chance of leaks that way. Cheers.
thank you thank you thank you for showing the flaws and screw ups! so relieving to know I'm not just hopeless 😅
Good job
If You Do This GET A PANELING BLADE preferably with about 36-40 per inch. It's a cleaner cut and it is a thinner kerf. So less like to wander.
And for Good Safety DO NOT USE A CARBIDE TIP ! Like I mentioned I spent 2 hours at the hospital getting one dug out of my arm !
thanks
add a flashing against the "house" and the shed like silcone to keep any H2O from soaking in behind the walll.....
You're right. I need to do this.
I did something similar to this/the big garden bench you did a while back measuring like 3 metres its rather heavy
awesome!
You're probably going to change your mind about leaving those gaps in the roof open after the first wasp discovers it's a nice entrance to their new nest... lol
Excellent!
I see that Bleach sticker on your tool chest. They’re still one of my favorite bands. 🤘🏻😎 Also, can we just appreciate that video transition @13:30?
I just finished designing my plans in SketchUp for my lean-to-shed build… perfect timing.
When my temps drop below 105°, I will start 🤣
Skip the pressure treated base, get a plastic pallet. They can be cut down to size with a circular saw without issue. The cocacola ones are very strong.
But also if you are going with wood for the base, you should ise ground contact lumber not regular pressure treated.
I used screws like that when I built my greenhouse, which I took down a few months ago.
Would you ever use a greenhouse panel for a shed roof?
You should cover the sharp edge of the roof but great build!
Nice job. I would go ahead and seal the openings with something or at least where I am there would be wasp nests galore every summer.
Yeah not a bad idea
@@Iliketomakestuff Around here we'd get birds moving through that sized opening and if they start nesting the law says you can't disturb them until they've left.
Diablo makes a "Steel Demon Ferrous Cutting Saw Blade" that is awesome for cutting the metal roofing material
Sweet, I had in mind building something like that.
It would have been nice to compare your project vs the store bought option: cost, time, quality, durability, usability, look, frustration in building/getting, etc.
Does the trim on the outside serve any other purpose other than aesthetic? I know with the door it adds rigidity but the rest of the cabinet should be pretty rigid without right?
Terrific build Bob, even with those minor screw ups along the way! 😂😂👍👍
I might have missed it but did you have anything anchoring this to the wall? Or is it bottom heavy enough that you aren't worried about it falling over?