S&G Titan Direct Drive - A Comprehensive Overview

Sdílet
Vložit
  • čas přidán 30. 07. 2024
  • The Sargent and Greenleaf Titan lock is based on the proven security of a rugged, motorised blocking device. Lock bolt retraction and extension is controlled by rotation of the keypad bezel following code entry. Manual bolt retraction and extension offers exceptional reliability, and allows direct attachments to the lock bolt without fear of compromising the drive mechanism.
    The Titan™ lock cable is protected in a specially designed channel in the extruded aluminium spindle that connects the keypad to the lock body. The advanced design resists twisting and chafing in day-to-day operation.
    External battery placement puts the battery inside the keypad, where it can be easily replaced, even with the safe locked and efficient lock design means the battery must be changed significantly less often.
    The S&G® Titan™ lock body is the same size and mounting footprint as other standard S&G locks, allowing for easy retrofit without the need for bolt work or mounting screw location changes. Plus, it’s universally handed for RH, LH, VU, and VD mounting.
    Three Keypad Selectable Modes of Operation:
    Multi-User - The Master Code, Supervisor Code, and any User Code can open the lock with a single code. Manager/Employee Code holders can access the safe only when it’s been enabled by a Supervisor Code holder.
    Dual Control is keypad selectable as an alternate, permanent mode of operation. Two different lock codes must be entered within one minute of each other to open the safe. This provides a higher level of security.
    Multiple Codes - One Master Code, one Supervisor Code, eight User Codes*, one Time Delay Override Code, and a Management Reset Code.
    Holdup Protection - Time delay is a proven holdup deterrent. The S&G® Titan™ D-Drive lock gives you a time delay up to 99 minutes, and a time delay override code for instant cash carrier access.
    Field installable bolt position indicator (BPI) module is available to let you tie lock action to alarms, video surveillance recorders, etc. The module can be added to a lock at any time, with minimal labour.
    For more information please visit: certifiedsafesireland.ie/
    #safes #titan #sargentandgreenleaf
  • Věda a technologie

Komentáře • 2

  • @M_E_T_R_O__9
    @M_E_T_R_O__9 Před 2 lety +1

    Is it plastic? how durable would it be to a hammer or something? thanks..
    Noooo.... i just seen the top tab and you pulling out the 9v battery... that looks sooo fragile..what if somebody cut the wires or something?
    I'm still thinking a good solid key is the way to go?

    • @CertifiedSafesIreland
      @CertifiedSafesIreland  Před 2 lety +1

      The keypad is only a low-cost code input device designed to be destroyed in an attack. The codes for the safe are held in the lock on the inside of the safe. A replacement keypad can easily be connected to the lock and the safe opened such an attack. This is quite unlike a key lock that if damaged may require drilling, damaging the safe. There is also the fact that a key can be copied and a key lock can easily be picked open, both without your knowledge. Please see this video: czcams.com/video/uTUj-wk2tTk/video.html